Easy to make DIY roll up blinds.
HTML-код
- Опубликовано: 14 окт 2024
- This video shows you the basic method to make easy DIY roll up blinds, please scroll down for the various steps on how to make roll up blinds.
good luck.
Step 1: Attach the fabric to the top and bottom end (nails,glue,.. whatever works for you).
Step 2: Attach 3 eye screws on the top end.
Step 3: Tie your string at the first eye screw and go from the back to the bottom end and up again from the front to the first eye screw, put your string through that eye screw and also put it through the second and third eye screw.
Step 4: Tie your string at the second eye screw and go from the back to the bottom end and up again from the front to the second eye screw, put your string through that eye screw and also put it through the third eye screw.
Step 5: Attach the roll up blinds to your window......Done!
Please leave a comment or a like if you found this video useful.
Well, I’ve watched this three times now trying to figure out how this curtain could possibly roll up. I guess I’m not the only one. 225,000 views and 700 thumbs up.
as mentioned try a small mockup using some chopsticks and a short piece of cloth...everything is easier with a real test trial. TWO strings...FIRST STRING ties to last hook, goes down on one side, up on the other, goes through 2nd and 3rd eye screw. SECOND string ties to second eye hook, goes down on one side of curtain, up other, and through 2nd eye hook and the last eye hook. While down, tie a not evenly on those two strings...it will pull the curtain up.
I tested this with some scrap fabric and dowels rods. Easy peasy. Don’t overthink it just do a trial run. Tie the strings together at the end because you always need to raise both sides at the same time. And you will need a curtain cleat or a command hook or something to wind the string around to keep it in the up position.
It occurs to me that you don't need to attach the cord hardware to the blind itself. That is desirable if you want a machine washable fabric blind. Attach all your hardware to a separate board. Attach the board above the window. Make a rod pocket at the top and bottom of the fabric. You would make the top rod longer so it extends beyond the rod pocket. Use the exposed ends of the rod to hang the cloth blind just below the installed board. Loop the pull cords around the blind, etc. For narrow blinds pvc rods Should be fine. For a very wide blind, I would use metal pipe for the top rod so that it remains rigid and does not bow or sag.
useful thanks
Great Vid. I've just made a couple for the slim windows on my front door, my little peep hole sits in between :-) . Easy to follow instructions... Thank You.
Wolverina Fuzzbutt your tube name is fing hilarious 😂😂😂
Thankyou...in just wondering what the top and bottom end are, I don't have any others to look at...the bottom looks like a bamboo stick? Is the top MDF? Thankyou
Question: So you need 2 strings to do this not 1 long string, right? They both come out at the same end and when rolling up or down they will be doing the same thing at the same time but independently, is that correct?
Yes
Thank you. Looks easy. Going to try it.
Best of luck, and please let us know if it worked out for you.
Random Rookie easy to follow, one question, are you just going from back to front with string or are you putting it thru the bottom pole? The pic makes it look as if the string is being threaded thru the bottom pole and not just going in front of it. Can you clarify for me? Thanks
what components do you need to attach it to the window?
Nice try, but without real example or animation nothing is clear from this video..
If you have some prior knowledge of how shades work and experience with what materials work in different environments, it's easy to figure out. Starting from zero, you're right; it would be difficult to improvise as there are too many different possibilities to include in a short video like this. Hope you found another step by step, material by material video, but this worked great for me.
Can we do the strings like Roman blind?
Being them all one side then the them together?
Otherwise how we can rolle it up?
The strings would be exactly like a Roman blind and need to extend as long as you need them to tie together and pull down and tie to a place on the wall to hold them up.
Not very clear instructions for a novice. You actually need 2 strings. They both end up going through the 3rd eye screw and you pull the 2 ends of the string together. The diagram is confusing as it only has 1 string, but when you get your head around that, it’s a good system.
3 & 4 step are not so clear. Please explain
No matter what you put up on youtube, there are always haters....weird.
Thank u so much for sharing.....I now know how to make roll up blinds. ..just one question...must u use a round rod for bottom ....?...-:)
Here's a video that shows how to make this and how it works: ruclips.net/video/aZv4f3--sbo/видео.html&ab_channel=BobBee
I guess ANYbody can tell anybody else how to do something...even if they've only done it once! Hence the name 'Random ROOKIE"!
step 4 is not clear...can anybody help
👏
CUTE, BUT I THOUGHT IT WAS GOING TO BE AWNINGS............"CLICKBATE"...…….SMFH
Huh? The title of video is roll up blinds....