I've just recently 'stumbled on' this BOSSY DIY channel, possibly by divine guidance.. who can say? This is an inspirational content video from an 'electronic' who clearly knows what he's doing, someone who shows a high level of skill and knowledge in a specific area, and someone who can pass this clearly onto other interested parties. Well done !!! P.S. As Arnie would say.. " I'll be back !!! "
I just got a skil drill with dry batteries and i did the replacement for li ion 18650 from a old laptop battery and now works like a charm! In first hand i use bad batteries but in my second try works thanks ( forget my profile name, my doughter ismessing around my profile)
Is nice but I would like to ask you more about the BMS there are to many models, if you can make a video about the good ones and the specifications Gratings
When putting the batteries in parallel using the nickel strip, it may be prudent to check they are at similar voltages. If one battery is at 2.9V and the other is at 4.2V then you are going to get current flowing from one to the other. The batteries could get rather warm while they both balance out to some mid-voltage.
You did this a year ago with a much bigger BSM that used the ORIGINAL charger. I assume things have improved, as you've madethe same video, but with a much smaller BSM. However, it seems you need to use an external charger with this type? QUESTION: Why can't you used the original charge with this updated version of this project - like you did a year ago? Thanks.
Great video..! I would to change my battery ni-cd to li ion.. and still use old battery charge original bosch.. what kind bms I should use for it? Thx before and thx so much for answer my question..
Sir, May I ask .. I want to change the 12v nicd cordless battery to a 12v li ion, so what is the appropriate value (ampere) for bms ??? 25a or 40a and so on ... Thanks sir...BOSCH GSR 12-1
Boa tarde tenho uma BOSCH PSR 960 DE 9,6V que já não carrega. Agradecia a sua ajuda para calcular o tipo de baterias a usar. Tenho fotos, mas não dá para enviar por aqui. Cumprimentos
I've just recently 'stumbled on' this BOSSY DIY channel, possibly by divine guidance.. who can say? This is an inspirational content video from an 'electronic' who clearly knows what he's doing, someone who shows a high level of skill and knowledge in a specific area, and someone who can pass this clearly onto other interested parties. Well done !!! P.S. As Arnie would say.. " I'll be back !!! "
Pro trick : watch series at flixzone. Been using it for watching all kinds of movies recently.
@Luke Alaric Yup, I have been watching on flixzone} for months myself =)
I just got a skil drill with dry batteries and i did the replacement for li ion 18650 from a old laptop battery and now works like a charm! In first hand i use bad batteries but in my second try works thanks ( forget my profile name, my doughter ismessing around my profile)
I'm glad I was able to help you.
Thank you for watching my videos
How are you charging it. Will the original charger still work ?
Can you still use the old charger for the new battery?
Hi thanks for the video, can you please tell me, are you able to use the original charger, or need to build a liion charger?? Thanks in advance!
cannot use the original charger anymore..if u watch till the end, he did show how he charge it..
@@benjy6358 i built my own modification since, and i use the original charger. Works fine for me.
Is nice but I would like to ask you more about the BMS there are to many models, if you can make a video about the good ones and the specifications
Gratings
When putting the batteries in parallel using the nickel strip, it may be prudent to check they are at similar voltages. If one battery is at 2.9V and the other is at 4.2V then you are going to get current flowing from one to the other. The batteries could get rather warm while they both balance out to some mid-voltage.
Great video!
I need to do that to my bosh drill battery .. 🙂👍
😉 thanks
Çok güzel eline sağlık hocam
You did this a year ago with a much bigger BSM that used the ORIGINAL charger. I assume things have improved, as you've madethe same video, but with a much smaller BSM. However, it seems you need to use an external charger with this type?
QUESTION: Why can't you used the original charge with this updated version of this project - like you did a year ago? Thanks.
hi
I made this project for those who do not have the old charger.
here you can use any charger between 12-14V and minimum 1A
Great idea and very good presentation..👍👍👍
Perfect. For 14.4 how many batteries to take?
14.4 / by the voltage
Excellent project
Many thanks
Great video..! I would to change my battery ni-cd to li ion.. and still use old battery charge original bosch.. what kind bms I should use for it? Thx before and thx so much for answer my question..
Looks like you had some room at the front/back of the casing for the module
Elinize sağlık...
Alttan değilde önden şarj soketi yerini açsaydınız daha görsel ve kullanışlı olurdu.
It is a good idea
Kendi şarj cihazı olmuyormuki, başka şarj kullandınız, sebebini açıklar mısınız, Teşekkürler 👍
What is the Charger??
Excellent, can convert Metabo drill with 4 pole to 2 wire Gnd and +
Sir, May I ask .. I want to change the 12v nicd cordless battery to a 12v li ion, so what is the appropriate value (ampere) for bms ??? 25a or 40a and so on ... Thanks sir...BOSCH GSR 12-1
those drill won't go to 5 amp
sir you have tutorial for bosch 14 voltds how to replace battery to li on or li thium thnks
Nice, Like this project.
I'll try.
I use BMS 3s30a v3.1
Merci 👍
Boa tarde tenho uma BOSCH PSR 960 DE 9,6V que já não carrega. Agradecia a sua ajuda para calcular o tipo de baterias a usar. Tenho fotos, mas não dá para enviar por aqui. Cumprimentos
Great video!
Thanks!
crap unit gets siezed changing discharged battery eliminated
Thank you so much😊
👍🇹🇷
Kaç para
Save our ears and remove the frantic awful music, silence is better than that rubbish.
7