Kitchen Litho Part 2

Поделиться
HTML-код
  • Опубликовано: 3 окт 2024
  • In this video i prepare the plate and print it .
    Thanks for watching , any questions just ask !
    visit the creator of this process website: www.atelier-kitchen-print.org
    My Website: www.alisonsloggett.com/
    instagram : @alisonsloggett
  • ХоббиХобби

Комментарии • 37

  • @Mick_Holland
    @Mick_Holland Год назад +1

    Thanks for explaining the process in Part 1, I think using gloves would help and the additional process of washing off the marks with oil might give a cleaner image. Overall your video has added a lot to my understanding of 'Kitchen Litho' so I now feel primed and ready to go. Cheers 👍🏼

  • @Judy49067
    @Judy49067 6 лет назад +1

    I have had so many failures with kitchen litho I finally gave up. But your demo was so uncomplicated and straightforward that am going to have another go at it. So many thanks and I concur with the other comment - more please! Judith

    • @TheYellowjim
      @TheYellowjim  6 лет назад

      yes It is a bit tempermental, that's why I stuck to soft pencil in this demo. I would say dont be afraid of leaving it in the cola for a bit longer, also agitating it in the cola helps as well, then the plate is a bit more robust and less likely to scum up , keep trying !! :)

  • @kocovgoce
    @kocovgoce 5 лет назад +1

    You have described the process very well simple and fairly well show the process

  • @TERRYBIGGENDEN
    @TERRYBIGGENDEN 6 лет назад +2

    Very nice demonstration. Clear and easy to follow. Please make some more? :-)

  • @ТатьянаЧистякова-ш7е
    @ТатьянаЧистякова-ш7е 4 года назад +1

    Да когда ж уже опустите в эту жидкость свой рисунок😁

  • @elizabethmaddicott5974
    @elizabethmaddicott5974 6 лет назад +1

    Thank you so much for your replies. Keep posting x

  • @elizabethmaddicott5974
    @elizabethmaddicott5974 6 лет назад +1

    Ps. Why don't you need to use oil in this instance? Cheers.

    • @TheYellowjim
      @TheYellowjim  6 лет назад +2

      I found when i use oil to clean the drawing media off of the plate it was much more likely to just scum up and ink sticks everywhere. So i try it without, and it works fine as long as the drawing medium isnt too thick , hope that helps , thanks !

  • @elizabethmaddicott5974
    @elizabethmaddicott5974 6 лет назад +1

    Lovely video. Did you use the graphite powder? How DO you apply it?

    • @TheYellowjim
      @TheYellowjim  6 лет назад

      Elizabeth Maddicott hiya, no i dont think i did in the end , i would have just sprinkled it on to see what happen as it comes in a little pot with a small spout, I will endeavour to try it to see if it works , thanks

  • @katharinaschadenhofer8878
    @katharinaschadenhofer8878 3 года назад

    Hi there. First of all it's a very helpful video! I was wondering, if simple oil paint would work too instead of etching ink?

    • @TheYellowjim
      @TheYellowjim  3 года назад

      Hi , yes i have managed to print a kitchen litho with oil paint (I might have mixed it with print extender, I cant remember) but yes, its not as fine as printing ink but if you can get a neat amount on a roller you can :)

    • @katharinaschadenhofer8878
      @katharinaschadenhofer8878 3 года назад

      @@TheYellowjim Thank you very much for your quick answer! :)

  • @tanf5
    @tanf5 2 года назад

    Do we need to thin the ink?

  • @ТатьянаЧистякова-ш7е
    @ТатьянаЧистякова-ш7е 4 года назад +1

    Что- то с колой колдует 👍👍👍😁

  • @jeremywalton783
    @jeremywalton783 6 лет назад

    Hi, thanks for sharing your video. I've some questions... You say in another reply that the plates wont keep, how come the plates wont keep? and what are the two oil tubes you use? thanks

    • @TheYellowjim
      @TheYellowjim  6 лет назад

      The plates dont seem to keep in my experience, but then i have not cleaned them off once i have finished printing, but i think its down to the grease in the ink contaminating the foil . the two tubes are oil based printing ink , one black the other raw umber to make a slightly warmer black. thanks for watching :)

  • @katgillang
    @katgillang 6 лет назад

    What size edition can you get with this process, approximately?

    • @TheYellowjim
      @TheYellowjim  6 лет назад

      im not sure, potentially as many as you could print in a day? the plates wont store so you have to print them all in one go. but easily 20 odd from something like this. for more info check out www.atelier-kitchen-print.org and check out her videos on youtube to she prints one with a large edition. hope that helps.

    • @leonmorgan4004
      @leonmorgan4004 4 года назад

      Any idea off the top of your head if akua intaglio inks would be usable with the process? The graphite method has got ideas bouncing!
      Brilliant demonstration

  • @emilieaizier-emilion
    @emilieaizier-emilion 5 лет назад

    Sorry for all the same messages. I don't understand why, a problem of computer.

  • @emilieaizier-emilion
    @emilieaizier-emilion 5 лет назад

    Sorry for all the same messages. I don't understand why, a problem of computer.

  • @emilieaizier-emilion
    @emilieaizier-emilion 5 лет назад

    Sorry for all the same messages. I don't understand why, a problem of computer.

  • @emilieaizier-emilion
    @emilieaizier-emilion 5 лет назад

    Sorry for all the same messages. I don't understand why, a problem of computer.

  • @emilieaizier-emilion
    @emilieaizier-emilion 5 лет назад

    Sorry for all the same messages. I don't understand why, a problem of computer.

  • @emilieaizier850
    @emilieaizier850 6 лет назад

    You forget to mention the inventor or this technique: Emilie aizier alias Emilion. My website http//atelier-kitchen-print.org Thank you.

    • @TheYellowjim
      @TheYellowjim  6 лет назад

      Emilie Aizier hiya, i did mention the inventor in the part one of this video , ill stick a link to your website in the description of this one .

    • @emilieaizier850
      @emilieaizier850 6 лет назад

      Merci ! Thank you for your support ! :-)

  • @Cloud-ok6wy
    @Cloud-ok6wy 4 года назад +1

    nice cat over stolen guitar