Ultimate Patcher Tool how to use

This tool automates the process of updating the BIOS with different variants for X99 platform cards with the X99 and C612 chipset, as indicated by the developer, although the video that we will see at the end of the article says that it is also valid for boards with a desktop chipset . which I can not confirm .
The first thing you need is the BIOS file, so you can use your original BIOS , by dumping it (dumpear = backup, make a backup, load it from the BIOS chip on your motherboard) or use the file corresponding to your model .
Features and improvements
The original BIOS may contain overclocking options for the 16xx V3 series processors, although in many cases they do not work, come on, they are like paste because they do not act on the micro voltage controller and the multiplier does not work.
Remember that for overclockable Xeon processors, the overclockable chipsets are X79/C602 for the X79 platform and X99/C612 for the X99 platform, although this program is only for the X99 platform.
For all of these, we will flash a modified BIOS , which will be patched, and add these working functions so that these configuration parameters can be used and affect the processor accordingly.
Updating the BIOS with Turbo Boost
This tool also allows you to fix the original BIOS or MOD BIOS, which is missing in the drivers, to have Turbo Boost function , which is nothing but a kind of hack on the V3 series processors of the E5 Xeon line, which have a vulnerability and allow all cores to be unlocked, allowing them to reach maximum speed.
Modifications are successfully performed in C3/C6 states to eliminate hangs or reboots, as well as removing Haswell microcode from the BIOS firmware to make the Turbo hack work.
Sleep state solution
On Chinese boards originally with the original bios, there are often problems arising from the sleep state . And when entering this state, some boards would not start and had to do a hard reset.
Re-flashing BIOS type FFS did not solve this problem, and only in the middle of 2021 appeared BIOS type PEI, which provided a solution to this problem.
With the standby state the problem sometimes went further, as there are models of boards that if they do not accept standby mode, no longer boot and reset BIOS, have to resort to updating the BIOS with a USB programmer.
That's why you should take this into account and flash with a PEI-type BIOS, except for dual-boards which have to be flashed with FFS.
customize the boot logo
Not all Chinese motherboard models boot with the brand logo , which is then included in the BIOS.
Often when we flash BIOS mods, the logo is already loaded, which we can disable if we want, from the BIOS settings.
So, although they do not have by default a boot logo, such as the brand, it can be put. There are tools that modify the BIOS to do this, but the Ultimate Patcher Tool has it built in.
So if you want a logo at startup and you want it the way you want it, that is, customize it, you can do that from the program options and upload an image of your choice to add it to the BIOS file.
Smart fan / sleep mode
For boards that have problems reading the temperature and fan speed at boot after coming out of hibernation mode .
The fans, however, operate normally as they would during normal computer startup.

[@soft4bro]

Ultimate Patcher Tool - soft4bro.com/soft/ultimate-patcher-tool-utp-download