@@themishapgarage3403 Warm is always best. I'd heat up with a torch or inductor, soak it with lubricant overnight, then heat up again just before you attempt to remove them. Good luck!
I NEVER use those type of gasket, the ones with the composite material inbetween those flimsy metal layers. Only MLS gaskets. Not that it will solve your problem but I’m not a “mechanic” either. Heat and patience, God speed!
I definitely wouldn’t use an impact. I’m not a mechanic, so take my advice with a grain of salt. Soak the bolts in some penetrating fluid when the engine is hot, keep doing this for a few days if you drive the truck, if not, one time should be fine. Use a small, handheld propane torch to apply localized heat. Use a hand ratchet, and pray you don’t break the bolts. But if you use penetrating fluid, wait a few hours and use heat, I would be surprised if you break them. Best of luck!
I'd heat them up to loosen up the lock-tight, then soak with some lubricant.
@@BellaRocko Would you try when the engine is warmed up or cooled down?
@@themishapgarage3403 Warm is always best. I'd heat up with a torch or inductor, soak it with lubricant overnight, then heat up again just before you attempt to remove them. Good luck!
@@BellaRocko appreciate the advice. Kind of what I was thinking
I NEVER use those type of gasket, the ones with the composite material inbetween those flimsy metal layers. Only MLS gaskets. Not that it will solve your problem but I’m not a “mechanic” either. Heat and patience, God speed!
Right on. I appreciate it man!
I definitely wouldn’t use an impact. I’m not a mechanic, so take my advice with a grain of salt.
Soak the bolts in some penetrating fluid when the engine is hot, keep doing this for a few days if you drive the truck, if not, one time should be fine. Use a small, handheld propane torch to apply localized heat. Use a hand ratchet, and pray you don’t break the bolts. But if you use penetrating fluid, wait a few hours and use heat, I would be surprised if you break them. Best of luck!
@@ItsSpeltChayce I've been spraying them for 3 days so far. Going to try tomorrow hopefully!
Heat them up
Or use extreme cold like freon shot.
My advice is use a crowbar
As you may be able to tell, i have no idea what im talking about
Sounds like a solid plan to me
I like michaelmullis way of doin it lubin it up like p diddy hell ya brother🤟🤠 (he's a guy in the comments)
What ever works right?
Lube and a impact
@@michaelmullis8515 Impact seems dangerous