I would like to thank you very much for the clear explanation of this firmware. You are the first who does not talk in secret language but clearly shows how to use it. I'll keep following you '73 from the Netherlands John PE1DMK
Thanks for the video, every little bit helps. As a complete newcomer to this I am looking for a guide on how this works. I have worked out what buttons change which setting. For example, you are pressing 6 to change the step on the right hand side but also by pressing 1 & 7 this changes the step on the left. It would be good if you could explain what is actually changing and what each setting does. Especially pushing ptt, i have worked out the LMA etc is adjustable but again what are these settings? There are plenty of videos showing how this works but surely i am not the only one looking for an explanation of what is changing and why i should be changing it.
Развлечения
I would like to thank you very much for the clear explanation of this firmware. You are the first who does not talk in secret language but clearly shows how to use it. I'll keep following you '73 from the Netherlands John PE1DMK
Thanks John 73
egzumer v0.18
In spectrum mode, use the F key to reduce the squelch... and increase it again with the star key (scan).
Yes show that later in Video.
Thanks.just bought one although harder to navigate than my old Uniden UBC30XLT.will need more research.
Yes
Another good video! Thank you!👍🏼👏😊
Thank you too!
Thanks for the video, every little bit helps. As a complete newcomer to this I am looking for a guide on how this works. I have worked out what buttons change which setting. For example, you are pressing 6 to change the step on the right hand side but also by pressing 1 & 7 this changes the step on the left. It would be good if you could explain what is actually changing and what each setting does. Especially pushing ptt, i have worked out the LMA etc is adjustable but again what are these settings? There are plenty of videos showing how this works but surely i am not the only one looking for an explanation of what is changing and why i should be changing it.
Hi I have put egzumers instructions in the description I will keep learning .
@@HamTechRadioScannerDrones Thanks. Learning here too. Your videos are very much appreciated.
Klasse 👍
73
Can you scan in the spectrum
ruclips.net/video/IHeiPo5YFg4/видео.html
I'm running the fagci firmware. Do you like the egzumer one better?
Yes:ruclips.net/video/jsQpeMV33Mo/видео.html&ab_channel=HAMTechRADIOSCANNERM0FXB%26DRONEHOBBY
I like playing snake on mine
Nice