Hey I don’t how old you’re I was so frustrated with similar machine, I run into this video and you save the day. Thank you so much. You are the man or woman.
I am so glad you did this!!! I was having the SAME problem. I finally saw the slit on the back and tried it and it still didn't work! So I looked through the videos and finally found yours! After watching this... I went to my calculator and viola! It worked 'AFTER' I pushed the paper in a little more than I was! THANK YOU!!
Thank you for this video. I purchased a new Sharp calculator last year and now the paper roll is done. I have been fighting with this thing for two days. You have saved my life! Thank you, thank you, thank you!
First time changing the paper on the adding machine!!! Great step by step video! My coworker and I were super impressed by how easy this was!!! Thank you!
THANK YOU! THANK YOU! THANK YOUUUUUUUUUUU! This was driving my colleague and I nuts. I left it alone for 4 days and finally decided to google and found your video! Again, THANK YOU!!! 😄😄😄😄😄😄
Appreciate the video! Took me about 20 seconds to do it. My biggest tip is cut the paper to get a fresh end to feed, works much easier. Thanks again & God bless
Thank you! I have the manual but even a mosquito couldn't read it the print is so small. Very helpful! I'm groping my way through trying to figure it out (even found the manual online, but the print is so small still and if I enlarge it it's too big to print.).You've helped a lot of people!
I know exactly what you mean. I like many of the other videos on here but the informational real world videos are what brings me on youtube first and foremost. I am happy to be of help 😀
Thank you!! I had to laugh at myself. My assistant and I was trying to figure out how to load the paper and spent all less than 15 minutes. Kudos to you!!! Thanks again.
Oh My Goodness. I bought the little sharp adding machine. I'm doing a bunch of expense reports I do them about ONCE every two years with COVID its been almost 4. I'm not an accountant but I was a bank teller almost 30 years ago and no matter what the new tech says, there is nothing like a running tape. But without your video I would still be trying to figure it out. 🤔🙃😉😉. That you, you saved my sanity.!
Absolutely and you are quite welcome. I can definitely relate to some of those fustrations as I am sure you heard on the video, LOL. Have a great day and thank you for taking the time not only to come to my channel and watch the video but to post a comment. 🙂
THANK YOU!!! I had found the slot and tried to feed it but it wouldn't go in so I kept looking for another way. Fought with the stupid thing for 20 minutes and gave up. I found your video so I kept trying the slot and finally made it work.
Thank you for posting this video, I’ve had this for years and just plain forgot about that little slot since I ran out of paper the last time I used that about four years ago.😉
You are welcome and I know exactly what you mean. I did a few searches myself trying to figure it out when it happened to me. So I thought I would share the knowledge with anyone else going through what I did 😀
so happy to have found this video. I had been struggling for a while, its a relief to know I can just on get on with it now. Thank you so much for taking the time....phew.
Thqnk you for doing this video, I have to say, I saw the slot on the back but it has some “teeth” and I thought it was the joint of the two faces of the machine or something after I try with a thorn by hand paper, then when I saw your video and you said it has to be with a clean streight cut, then I got it. However in 1987 I work on an office where we used adding machines, Casio, and they were really noce and we did’t have any provlema to feed the roll of paper. Anyway, thank you for your video it was really helpful.
Thanks so much! I saw that slot and thought that was probably where its supposed to go, but it wasn't feeding. After watching this, I saw that you just have to push it in a little further and it'll feed.
From the time I made this video I have been transfered and have not had the same calculator but if I come across it again I will make sure to find out for you and make a new video. Sorry I was not able to help you on this matter.
Hey - THANK YOU for this!!! I just bought this model - always had a Canon (which I should have purchased). I have the directions and there was no indication of the slot on the back. None. And showing the difficulty was a good thing. Wish I had a boss to switch out with. 🥳
I'm sorry I have since been transfered to another office and no longer have this model. If I come across it again I will make sure to check and post more videos about this model. Have a great day and thank you for taking the time to post a comment on my video 🙂
Thank you for the video. I did it exactly like you did and it didn't work when I tried to print! The paper roll on mine had to go the other way, under not over. For those of us that are very literal, I hope this helps.
Yes and I was at my wits end 🤪 with that calculator so I knew others would be as well as well, which is why I decided to make the video. 🙂 Glad it helped.
I thought mine was broken. I AM happy to see it just needs some finagling. I could not get the darn paper to feed through! That might be something the company could work on. It's quite frustrating...
Someone else posted to try and cut the paper at an angle. As you saw it took me multiple tries to push and giggle it in for it to take. Though I must admit I was doing it one handed for the video ☺
I'm sorry to hear that you are still having problems with your machine. Hopefully it is something someone at your place of employment can help with, or perhaps either get you a new one, or a different model. I was also quite fustrated when I first tried to change the roll of paper for this particular model. But seeing as I am just an employee I did not have a say on which model was purchased for our office. So I can relate, to a point, to your fustration.
Thank you. I didn't know there was a slot on the back. Spent hour or more until I found your video.
Oh I'm happy to hear that the video was helpful to you 🙂
Hey I don’t how old you’re I was so frustrated with similar machine, I run into this video and you save the day. Thank you so much. You are the man or woman.
I'm happy I was able to help. I am a woman and old enough to have adult children 🤗
You are a genious.I tried to put that paper in every spot and did not know about the slot on the back!
Thank you that is very sweet of you to say. I am just happy that I was able to help 🙂
I am so glad you did this!!! I was having the SAME problem. I finally saw the slit on the back and tried it and it still didn't work! So I looked through the videos and finally found yours! After watching this... I went to my calculator and viola! It worked 'AFTER' I pushed the paper in a little more than I was! THANK YOU!!
You're welcome 😊
Me too. It's a real world tutorial 😊
@@amber.cartomancer You're Welcome 🙂
I’m at my night audit job at a hotel rn, and this video saved me 😂😂😂😂😂
Saaamee
@@moskiesroybal4569 So happy that you found the video useful 🙂
@lemonade9922 Sorry I thought I had reply to your comment. I am happy that the video helped
Thank you for this video. I purchased a new Sharp calculator last year and now the paper roll is done. I have been fighting with this thing for two days. You have saved my life! Thank you, thank you, thank you!
😂😂😂 ❤❤❤❤❤
I am happy the video helped 😊
@@DeesDigitalDelight It really did! 😂 I was struggling. You have blessed us -- take care and enjoy your week. I appreciate you for recording this!
Hhji3i4iiß keldp so meu3ueeuuwwujriiroirkeuejejejmej2jjkli 0:59 1:01 @@thenatashaverse
you are welcome
First time changing the paper on the adding machine!!! Great step by step video! My coworker and I were super impressed by how easy this was!!! Thank you!
You are quite welcome and so happy I was able to help 😊
Thanks sooo much. They definitely don’t have these instructions inside. I wouldn’t have thought to look back there either. Easy Peasy 😅😊👌🏾🙌🏾
You're welcome. I'm happy this video was able to help you. 😊
THANK YOU! THANK YOU! THANK YOUUUUUUUUUUU! This was driving my colleague and I nuts. I left it alone for 4 days and finally decided to google and found your video! Again, THANK YOU!!! 😄😄😄😄😄😄
@@LadyTrim you are quite welcome. I am happy I was able to help
Appreciate the video! Took me about 20 seconds to do it. My biggest tip is cut the paper to get a fresh end to feed, works much easier. Thanks again & God bless
You're welcome and glad my video was able to help you. Thank you for the tip
@DeesDigitalDelight no problem thanks again for posting. Have a blessed day 🙏🏼
And you as well 😊
Thanks you so much!!! I went through everything you went through before finding your video. I've never seen a calculator thread this way.
I know right. Glad I was able to help😊
Thank you! I have the manual but even a mosquito couldn't read it the print is so small. Very helpful! I'm groping my way through trying to figure it out (even found the manual online, but the print is so small still and if I enlarge it it's too big to print.).You've helped a lot of people!
I had the same issue when I searched for the manual originally. I'm happy the video was able to help you 🙂
Exactly!!!!
@@bonitacallipare5338 🙂
You saved my tush! I didn't see the little slot on my Universal but it worked exactly the same thanks to you. ALL the same frustrations!!
I am happy that my video was able to help you 🙂
Just subscribed. There are millions of us just trying to make it through and real world videos are what we need 😊🤗
I know exactly what you mean. I like many of the other videos on here but the informational real world videos are what brings me on youtube first and foremost. I am happy to be of help 😀
Thanks for taking the time to do your video. Sharp failed us by not making a simple readable online user manual. You saved my day!!
I felt the same way which is why I felt the need to share the info once I figured it out. 😊 I'm happy that it was useful to you
Thank you!! I had to laugh at myself. My assistant and I was trying to figure out how to load the paper and spent all less than 15 minutes. Kudos to you!!! Thanks again.
@@pastorviviannesmithmpa9189 you're welcome 😊
Thank you!! I didn't see the slot because I had already loaded the roll of paper. Working like a charm niw.
You are welcome ☺
Thank you! I’ve watched your video twice, now. Today, and four years ago. I didn’t remember from four years ago about the slot in the back. :)
Wow! You have definitely made my day. And Welcome Back!! I'm so happy that I can continue to help. You have a great day.
This video just saved me!! I have been struggling with this for over an hour. THANK YOUUUUU for posting this!!
You're welcome 🙂 I am happy that I was able to help with my video
Thank you sooooo very much for this!! I was lost and just about to toss this thing out the window-seriously. Best help video by far!!!
You're Welcome 🙂
Oh My Goodness. I bought the little sharp adding machine. I'm doing a bunch of expense reports I do them about ONCE every two years with COVID its been almost 4. I'm not an accountant but I was a bank teller almost 30 years ago and no matter what the new tech says, there is nothing like a running tape. But without your video I would still be trying to figure it out. 🤔🙃😉😉. That you, you saved my sanity.!
I know exactly what you mean. Happy I was able to help 😀
THAK YOU!!!! I really appreciate this...the little slit in the back, I just didn't see it :)
I had the exact problem which is one of the reasons I decided to make this video. Glad it was helpful to you ☺
Thank you so much for this video, and for validating my frustration with how to put in a new roll of paper.
Absolutely and you are quite welcome. I can definitely relate to some of those fustrations as I am sure you heard on the video, LOL. Have a great day and thank you for taking the time not only to come to my channel and watch the video but to post a comment. 🙂
THANK YOU!!! I had found the slot and tried to feed it but it wouldn't go in so I kept looking for another way. Fought with the stupid thing for 20 minutes and gave up. I found your video so I kept trying the slot and finally made it work.
You're welcome, and I'm glad you went back to try again. As you probably saw, I had to jiggle the paper in myself a couple of times 🙂
Thank you for posting this video, I’ve had this for years and just plain forgot about that little slot since I ran out of paper the last time I used that about four years ago.😉
You're very welcome. I am happy to know that the video was helpful to you
Thanks for the video, even If I would've seen that slot I don't think I would've thought it was to load the paper.
You are welcome and I know exactly what you mean. I did a few searches myself trying to figure it out when it happened to me. So I thought I would share the knowledge with anyone else going through what I did 😀
THANK YOU SO MUCH! I didn’t see the slot on the back.
You're welcome 😀 The same thing happened to me.
Thank you so much for the help! Me and my non existent patience really appreciate it!
You are most welcome 😊
THANK YOU!!! I never knew that little slot was back there either! You saved me after hours of racking my brain!😅
You're welcome. 😊
so happy to have found this video. I had been struggling for a while, its a relief to know I can just on get on with it now. Thank you so much for taking the time....phew.
You're Welcome 🙂
Thank you!! This was just what I need! I really appreciate you taking the time to show the rest of this how easy it can be.
You are welcome
THANK YOU!! Almost threw this calculator in the trash!! 🤣🤣
LOL oh I know that feeling all too well. You are welcome
Thqnk you for doing this video, I have to say, I saw the slot on the back but it has some “teeth” and I thought it was the joint of the two faces of the machine or something after I try with a thorn by hand paper, then when I saw your video and you said it has to be with a clean streight cut, then I got it.
However in 1987 I work on an office where we used adding machines, Casio, and they were really noce and we did’t have any provlema to feed the roll of paper.
Anyway, thank you for your video it was really helpful.
Oh yes I know exactly what you mean. I am happy to hear that the video was able to help. 🙂
Thank you so much, Love! My 93-year-old father really depends on this! And it had any stumped as well!
Glad that I was able to help with my video 🤗
I was at work panicking because I had to cover for my other coworker while also doing my job. Saved my life😂
I am happy this video was able you (save your life) 🙂🤣
Thanks so much! I saw that slot and thought that was probably where its supposed to go, but it wasn't feeding. After watching this, I saw that you just have to push it in a little further and it'll feed.
I'm happy that the video helped out 🙂
Thanks, I needed something simple... This did it for me!
I'm happy it helped. 😀
Thanks SO much - I have just spent over an hour trying to do this ..... I too had missed the slot on the back ....
You're welcome. Seriously so easy to miss it. Happy the video helped
I saw it, but thought…nah! Can’t be there! Yes, hate the drama, but finally it worked. Thanks for the video!
LOL, I know right. You're welcome 😊 Glad it helped.
Thank you for taking out the time to make this!
You're Welcome 🙂
Thank you!! I just followed your video and did it. I was going crazy...Thanks!!!
You are welcome. 😊 Glad it was helpful 😌
Thank you for this excellent video, helped me get started in a simple way. You saved me a lot of time!
I'm happy that it was helpful to you ☺
THANK YOU!! Glad I wasn't the only one... very helpful! :)
You're welcome 😊
Thank you very much!!! We appreciate your help in creating this video
You're welcome
I'd love to know how to change the ink roller now!
From the time I made this video I have been transfered and have not had the same calculator but if I come across it again I will make sure to find out for you and make a new video. Sorry I was not able to help you on this matter.
Thank you me too! In the middle and couldn’t figure it out…decided to ask SIRI and your you tube popped up! 😉
Oh how wonderful to know. Glad I was able to help ☺️
Hey - THANK YOU for this!!! I just bought this model - always had a Canon (which I should have purchased). I have the directions and there was no indication of the slot on the back. None. And showing the difficulty was a good thing.
Wish I had a boss to switch out with. 🥳
You are welcome. Happy that the video was helpful to you 🙂
you are a lifesaver, I was loosing my shit!
LOL I know exactly how you felt. You're welcome
Thank you, thank you, thank you for posting this video!
You are welcome ☺
thank you for posting this appreciate it
You are welcome ☺
Thank you so much for this video! Saved me so much time & irritation.
You are welcome and I am happy i was able to help 😀
Thank you for your video!! I tried to push the paper through the top, like my old calculator.
Lol I tried everything.
I'm happy that the video was helpful to you 🙂
I appreciate you so much for this video. Thank you.
You are welcome. Thank you for taking the time to post a comment on my video 🙂
Yu the Goat thanks ❤
You're Welcome 🙂
Lol I came close to a meltdown. Glad it didn't happen in the middle of tax season 🥴. Thank you for this video God Bless you.
I totally can relate to that meltdown feeling with that calculator, LOL. I'm happy that the video was helpful 😊
Thank you! this video was super helpful. 👍
@@michaelglover9214 You're welcome 😊
You saved the day! Thank you!
You're Welcome 🙂
Thank youuu!!!! Saving me at my hotel job 😂
You are welcome. I am happy that the video was helpful 😊
Thank you!!!! I was about to throw it at a wall 😂
LOL, you are welcome. I know that feeling "all" too well. 🙂
You Rock! THANK YOU!! SO Helpful!! 🙂
You're welcome. I am happy that this video was able to help you.
How do we get it printed the grand total of calculations? I have one at work and the Equal sign doesn't work
I'm sorry I have since been transfered to another office and no longer have this model. If I come across it again I will make sure to check and post more videos about this model. Have a great day and thank you for taking the time to post a comment on my video 🙂
You saved me. Thank you
You're welcome and I am happy I was able to help 🙂
Thank you so much, I was thinking how to put the paper. 😅, I have a different calculator but it's the same process.
You are welcome. I am happy that the video was helpful 😊
Very helpful thank you so very much this video was a lifesaver ✌🏽🤙🏾😀😅
I'm glad it was helpful to you
Thank you for the video. I did it exactly like you did and it didn't work when I tried to print! The paper roll on mine had to go the other way, under not over. For those of us that are very literal, I hope this helps.
All advice and comments are welcomed. I'm sure that bit of information will help someone ☺️
You got to be shitting me. I been trying for 20 mins to try to figure it out. Thank you for this
You're welcome. Happy that the video was helpful 🙂
Thank you so very much. You are generous! ❤
You are welcome. I am happy that the video was helpful 😊
Haha I love that you shared this! Thanks and be well!
You are welcome. I am happy that the video was helpful 😊
Thank you! I had forgotten about that. 🤦🏼♀️
You're welcome. I'm happy the video helped 🙂
OMG...THANK YOU❤❤❤
You're welcome 😊
You Rock! Thank you so much for the information
You're welcome 😊
Thank you! I was frustrated just like you.
Yes and I was at my wits end 🤪 with that calculator so I knew others would be as well as well, which is why I decided to make the video. 🙂 Glad it helped.
This helped. Thanks!
You are welcome 🙂
You are a LIFE SAVER
Glad a can help 🙂
Thanks you!!! This thing is crazy!!!
Glad I was able to help
Oh so that's how you do it thank-you
You're welcome 😊
Thank You!!!! Super helpful!!!!!
You are welcome. I am happy that the video was helpful 😊
It worked. Thank you
You're welcome 🙂
I thought mine was broken. I AM happy to see it just needs some finagling. I could not get the darn paper to feed through! That might be something the company could work on. It's quite frustrating...
Absolutely 😊
Thank you! I had the same issue.
You are welcome. I am happy that the video was helpful 😊
saved my life 😂
I am happy that I was able to help 🙂
Thank you ❤❤❤❤❤❤❤ SO so Much! 😅
You are welcome 😊
Thank you 🙏🏾
You're welcome. Thank you for taking the time to leave a comment 🙂
The paper isn't threading through
Someone else posted to try and cut the paper at an angle. As you saw it took me multiple tries to push and giggle it in for it to take. Though I must admit I was doing it one handed for the video ☺
Thank-you.
You are welcome. I am happy that the video was helpful 😊
THANK YOU!!!!
You're welcome
Thank You!
You're welcome
YES THANK YOU !!!!!!
You're welcome 😊
Thank you, you are an 👼
You're welcome
THANK YOU SO MUCH OMG
You're welcome 😊
Thank you 🙏 thank you 😊
You are welcome 😊
thank you i coudnt believe that weird little slot was it lol
I know right 🤭and You're welcome
Thank you..
You're welcome. Glad this video was helpful 🙂
Thank you so much
You're welcome. Thank you for taking the time to leave a comment 🙂
THANK YOU LMAO
You are welcome. Thank you for taking the time to leave a comment.
Cut the paper at a an angle!
Thank you 😊 I will remember to try that next time
ty
You are welcome. I am happy that the video was helpful 😊
Thanks
You're Welcome 🙂
Still didn't work for me. I don't recommend this adding machine.
I'm sorry to hear that you are still having problems with your machine. Hopefully it is something someone at your place of employment can help with, or perhaps either get you a new one, or a different model. I was also quite fustrated when I first tried to change the roll of paper for this particular model. But seeing as I am just an employee I did not have a say on which model was purchased for our office. So I can relate, to a point, to your fustration.
Thank you so much . Lol
You are welcome. I am happy that the video was helpful 😊