Это видео недоступно.
Сожалеем об этом.
Modeling Bolt and Nut 🔩 on iPad | Shapr3D
HTML-код
- Опубликовано: 28 авг 2021
- Shapr3D is the professional 3D CAD to run on an iPad. It provides a precise way to create 3D models with a revolutionary experience.
It’s much different from others 3D CAD software. The first is in its mobility. Now, with the iPad and Apple Pencil, you can design anywhere, anytime.
In this video, I will use Shapr3D to model bolt and nut. Video content is for demonstration purposes only, not for use instructions.
For any suggestions, please feel free to leave a comment.
Thanks for watching!
#Shapr3D #3DModeling #BoltNut
My father taught me this on a basic level when I was a kid. It was all on paper with rulers, compasses, Bézier shapes, whatnot. It still amazes me how to design a bolt and nut is actually as much work as designing a nice armchair.
Omg. Just what I needed! Thank you
Pheeewwww 🥵 that was a challenge but I did it 💪 Thanks for this great tutorial.
fantastic videos best shapr tutorial ever!!! i like this tool, best cad !!!!
Great teaching, but its very fast, could you please add voice
Go to settings and slow the video down, works well
AMAZING!!! I love Shapr3D it is the best
Nice. Thanks a lot actually. It worked, you explained it well.
Wow wtf magic is this? Been struggling like hell to make something like this in Maya...
Brilliant!
thanks for this product!
While i repeated the nut and bolt in shapr 3d only the half thread is created why , any possible reasons?
Hello, what should we do if we want to attach a piece to another piece that we have designed? I mean, I am designing two models on one page and I want to glue them together so that when I print them with a 3D printer, one piece will be printed that is completely glued together. Please help me, thank you.
How do you add a tolerance between the nut and bolt?
Offset tool
Amazing!
Класно, дуже
Thank u so much… really appreciate this
Mashalaa
Great job! But...🤔 Left-handed screw? 👋🏻Ciao ciao
Nice software
Well done, thank you.
I tried the demo but just couldent get it to do what I wanted,maybe I need better hardware. Tried on a surface 4 pro.
Amazing looking. Just curious, in fusion we can type in the thread pitch so the hardware is a real world thread. Anyway to do this on here? Also can you animate the nut spinning off the bolt?
that WOULD be nice feature
Wow, and I was just so damn baffled about how people were making these screws, next question is how to you make the spot for it to fit in?
nice, but did you try DesignSpark Mechanical ?
When I printed this, the nut wouldn’t fit on the bolt. Not sure what I did wrong
Hi Aaron Mac! I am sorry for that. Can you tell more whether the nut is larger or smaller than the bolt? I think it's too tight because my model doesn't leave a gap between the threaded part of the bolt and the nut.
You need to have some tolerance between the parts. 0.2 - 0.35 mm depending on how much the filament shrinks
@@marzouk1577 And so, on Shaper3D, how did you do that ? Do you have "only" to enlarge the nut by 0.35mm ? Or is it something more complex ?
@thecutmaster this is my question because although the video is extremely informative and very professional workflow > if it will not print or thread correctly, my challenge is not solved. Should there be a slight taper on the bolt?
My only critique is the threads are reversed (left-threaded), was this printed and tested?
Hola, que ipad estas usando
Cool
Приятно смотреть, но это больше недостаток чем плюс, уже давно бы пора добавить инструмент с возможностью делать резьбу автоматически, как в fusion к примеру
براڤووووووووو👌👌👌🌷
Only the half thread is subtracted why?
Hi, followed every single step from your tutorial and afterwards I 3d printed screw and nut… but the screw won’t fit inside the nut, do you maybe know why? The‘re exactly the same size
Hi StormArteria! I think it's too tight because my model doesn't leave a gap between the threaded part of the bolt and the nut. You need to have some tolerance between the parts, as Mark commented below.
Same size as the bolt body ,you need a tolerance gap ,check out machinest handbook for dimentions.
The tutorial was very informative. Where can we find fastener libraries that can import to the Pro version?
Unfortunately, Shapr3D Pro doesn't have that fastener library either. You have to build the model yourself or import it from other software.
@@NCADStudio “from other” is rather vague. Do you have a source or link for standard fastener libraries?
Montaj yapılabiliyor mu bu programda
Hi i love your design
I have question
Can we design this in trial version of shapr3d??
Tnx
Yes, it can be done. AFAIK all functions are activated in the trial version except that you can not save them in high resolution.
In the free version, is it possible to also see the length of the lines?
Now available in windows early access
please... upload how to model a taper screw for pipe
Hi 디도쓰! I'm sorry I can't do that content right now for you. Instead, I have a suggestion for you. You can watch my video on how to model a conical spring. ruclips.net/video/3lG2edbNzeM/видео.html
But instead of using the sweep command to create the spring, you use the sweep command to create the thread. I hope this is of help to you.
IOU. Now i can!!
Для Андроид почему нет ?
والله شلعتو كلوبنه بس براغي عمي رسمولنه تصاميم عمارة خل نتعلم
Great work, thanks
What ipad version you are using?
iPad Air 4
@@NCADStudio thanks 🙂
Pena não ter pra Android! 😢
muito legal,,,
This shpar3d subscription right??
That's right!
@@NCADStudio i like the shapr3d but can not work with it, because the subcription metod payment very expensive, i think no problem if pay in one time
@@ferrysandria2660 they have educational license too
Hi, is there any master course of cad designing? I know the basic but I want to be a pro label designer 😄. Please reply. Is there any practice exercises then please provide me.
Hi Prayag Raj Behera! Sorry, I don't have any other advanced exercises for you right now. Thanks for your interest in my videos.
Дуже Вам дякую за уроки. Отримую велике задоволення. Шкода, що немає Української або Російської озвучки
Muy buen video para ver la técnica con la app, pero si intentas imprimir ese tornillo y tuerca , jamas enroscaran ya que cuando se hace la extrusión la rosca del tornillo y tuerca es tan perfecto que no encajan. Se debería de poder desfasar las caras de ambos para quitar una centésima a cada uno( turca tornillo) . Pero la app no lo permite, da fallo.
No se si existe otra manera como en fusion 360 que podrías poner hasta la métrica.
Espero que me digáis una solución ya que la app es fantástica.
Hi Marcos Arboleya! I think you can use the "offset face" function to resize the bolts and nuts so they can screw together. Or draw profiles for bolts and nuts separately.
@@NCADStudio hola muchas gracias por la respuesta ,¿ podrías hacer un video haciendo esos cambios que me dices para poder hacer tornillos reales desde 0 ?. es que no veo la manera de poder hacerlo sin fallos.
siento las molestias
@@marcosarb80 I will try to do it as soon as I can.
@@NCADStudio Muchas gracias.
sounds easy....is it really?
Hello how to access to the history of the drawing process
Hi christophe jarillot! Unfortunately, it isn't possible to access the history of the drawing process with the current software version.
@@NCADStudio sorry to read that it's a must have ! So I am going to wait for it.
is a MAC or android? or can use it in both?
Mac, iOS, and Windows, not available for Androi yet.
رائع جدا
what's the name of the program?
Shapr3D
How much this apps, and can i draw for 2D
It costs about $240 per year. You can export models from 3D to 2D drawings. It doesn't have 2D drawings like Autocad.
This doesn’t work anymore I guess
Hi Dak Dur? Can you be more specific? What doesn't work anymore?
Hi
Hello, I have a question, can you draw me a model?
Hi Lucas Mayer! What model do you need me to draw?
@@NCADStudio I don't understand English only German
It would be nice if the video showed all the steps on how to do this. So much jumping around, no real way to follow to get an idea of what you’ve done.
Thank you for updating the vid to show more details! Really handy.
No music please just voice
Nice but to fast
There is no offset. Just a useless thread.
What is the point of doing this when you go way too fast and we can’t actually learn how
Too fast with no verbally instructions