Do you know where I can find the small plastic piece that is on the bottom of the loading spring inside a Ghk magazine? I can’t find them anywhere and i asked Ghk if I can get one sent to me over a week ago but got no response.
You can get a universal adapter for the Odin. You can actually load shotgun shells pretty easily even without it but I'd definitely recommend it for gas mags.
Might actually get one now. When I first saw it get announced, I immediately disregarded it because I thought it was going to be worse than just using an Odin. Thanks for the initial review!
For the qna: Before you switched to gas guns what were the main guns you used? Thoughts on electric platforms that include some of the niceties of gbbs such as last round bolt hold opens, split gearboxes etc. (Stuff like the asg scorpion evo 3, ics split gearbox, g&g g3 system among others) Any plans to review some more budget oriented stuff (The double eagle mws clone for example)?
I’m tempted to put this in a pouch on a belt for easy access. Having a pouch with an opening that can quickly be opened and that mags can fit into would make filling them even easier without having to take the older out of the pouch, just open the top and fill the mags by pushing them into the pouch.
my buddy brought two of em to an event and let me tell you... loading a ton of mags in a fraction of a second compared to your traditional speedloader is a game changer.
If you really want to test it, you can try a TM AKM mags. I've played a couple games with it already and last time I broke a speed loader because the springs are so stiff.
The one thing that worries me is overfilling a mag for those gbbrs that where completely full mags could damage the nozzle due to the tension on thr BBs. Or for real cap purposes. I get it makes the loader quite a bit cheaper than the ones with counters and clutches
You have to wonder if it would be possible to 3d print a spring loaded plate to stop the bbs shaking so much? As it stands I might have to go all in and invest in a charro and sombrero to go with my maracas.
Hey there- we've stopped collecting Q&A questions for now, but this one we can at least answer now. Short answer: None. The only commonly used military eyepro of that era were the SWD (sun/wind/dust) protective goggles, but very few are ballistic and none would be safe to use for eye protection today. Using modern eyepro with retro kits is commonly accepted; it's one area where there are few good options. If you want something with that look, check out Bolle Chronosofts.
@@TryHardAirsoft-x nope that is 100% a v3 vfc mag you can tell by the red bits and I have one right next to me. also i doubt somebody who's this into gbbs would be caught dead with an lm4 due to their issues.
QnA question: The Main idea behind using a glock magazine PCC irl is magazine compatibility between Glock pistols and the PCC, but in airsoft there is only one gbbr that uses actual glock magazines that fit into glock pistols and that's made by King Arms, any ideas why aren't other companies doing this?
Just seen an MWS Magwell conversion for this today. Came with long glock mags, a magwell adapter, and a few other bits and bobs for like $250 Canadian I think. Was a neat looking setup. Haven't tried it obviously, but thought it was really cool. Mags look to load in the middle of the mag well instead of the front or back which I thought aesthetically looked better than the offset mags.
So how does it work without a torsion spring? Just stalls the motor until the force of the BBs pushes up the collar and disconnects the switch? That's really it?
I would love something similar to this for gelsoft use, since that's the only version of this hobby that's legal here where I live in Queensland, Australia. There's not enough innovation of new stuff going on it that space.
XE for the qna, and I know this question probably gets asked a lot, but what is a likely the best gbbr for people on a budget, I feel that a large majority of the time the people that say a certain budget gbbr, or any other gbb, is bad is due to them not treating their weapons right, could you give some insight on what you feel is beginner and budget friendly
Id thought this would be like 150! 69 isnt too bad! Id actually think of buying one eventually. How heavy is it when empty? (I gotta ship it internationally and 2lb cost 20 bucks so i gotta take it into consideration)
@@steyr357 Yeah, I always thought that the Laylax was noisy, slow and not powerful enough but I like it very much that it works with AAAs, you can find those in the middle of nowhere too. I prefer red dots running on AA or AAA for this same reason, unfortunately those are pretty chunky models.
funny my grub screw was also the same way........i said a lot of bad words lmao. this thing rips through epm1's as well not sure why ppl get so confused.
@@paulcrane9672 Shame they've decided to up the price from the $70~ (£55) shown on evike to a lovely £119, but hey. At least you can get one, plus it'll actually show up.
I'm in the middle of making a new gun from scratch. The mag is a midcap that holds like 300rds and there's no good way of loading it with an Oden. This will be a godsend.
Price is a turn off, I can also get mags loaded fast enough that I don't feel bad skipping over it. Although if you want some extra time to attend to other things, doesn't seem bad
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Thanks all for the Q&A questions- we've got a full list right now, and look forward to answering them soon!
Do you know where I can find the small plastic piece that is on the bottom of the loading spring inside a Ghk magazine? I can’t find them anywhere and i asked Ghk if I can get one sent to me over a week ago but got no response.
Any way to use with vfc m249 gbb stick mags? Or have u found a good solution for that at all? I can’t seem to load the damn things for my life
As someone who just got into using MWSs and shotguns, this is a godsend. I was hoping it wouldn't be garbage.
You can get a universal adapter for the Odin. You can actually load shotgun shells pretty easily even without it but I'd definitely recommend it for gas mags.
Yep can personally confirm this autoloader works perfectly with both TM magazines and the GM Pmags without issue
If this will fill TM mws m4 mags it certainly would be worth buying.
Do you have v3 gm pmags? Dam they are hard to fill@dieDoktor1
Might actually get one now. When I first saw it get announced, I immediately disregarded it because I thought it was going to be worse than just using an Odin. Thanks for the initial review!
For the qna:
Before you switched to gas guns what were the main guns you used?
Thoughts on electric platforms that include some of the niceties of gbbs such as last round bolt hold opens, split gearboxes etc. (Stuff like the asg scorpion evo 3, ics split gearbox, g&g g3 system among others)
Any plans to review some more budget oriented stuff (The double eagle mws clone for example)?
QnA Question: What is your favorite GBBR/Any other airsoft gun? For looks, fun, functionality, field appeal, ect.
Glock
You should make a secondary gun tier list. You know just the guns that you or your team has used as a secondary/backup gun
I’m tempted to put this in a pouch on a belt for easy access.
Having a pouch with an opening that can quickly be opened and that mags can fit into would make filling them even easier without having to take the older out of the pouch, just open the top and fill the mags by pushing them into the pouch.
my buddy brought two of em to an event and let me tell you... loading a ton of mags in a fraction of a second compared to your traditional speedloader is a game changer.
Refreshing to see something get nothing but praise, and from Evike of all places.
Looks perfect for outdoor
Could probably use this to upgrade the internals of a box mag.
If you really want to test it, you can try a TM AKM mags. I've played a couple games with it already and last time I broke a speed loader because the springs are so stiff.
That looks pretty cool.
And it seems to function well, too.
Looks like I’ll need to be getting a canteen pouch soon. Thanks for the video as always, this loader is pretty damn cool
How many members are in your team, how old are they, and what’s they’re favorite finger
This is actually really cool, i might buy one lol
Finding a speed loader that works with Ghk gbbr magazines is like a treasure hunt. Might get this soon.
For the qna:
Any updates for the TM saiga?
Any thoughts on doing a review on the WE g39?
I bought this on a whim because of the price point. Glad even you're enjoying it too XD
Fantastic video! Keep up the excellent work-you're doing a great job educating and entertaining!
The one thing that worries me is overfilling a mag for those gbbrs that where completely full mags could damage the nozzle due to the tension on thr BBs. Or for real cap purposes.
I get it makes the loader quite a bit cheaper than the ones with counters and clutches
Just remove a single bb after loading
Was sold when I saw you load the WEagle magazine.
You have to wonder if it would be possible to 3d print a spring loaded plate to stop the bbs shaking so much? As it stands I might have to go all in and invest in a charro and sombrero to go with my maracas.
Still exicted and waiting for you to do the WE AK review!!
PTS EPM1 mag?
same question as me, these mags chew up loaders !
Finally some modern alternative to the old laylax loaders.
Did you guys try it with the vfc m249 mags?
Curious to see this work with a guns modify mws mag. They are quite odd to load sometimes
Q&A:
What eyepro options are available for US 70s - 90s kits that are historically accurate?
Hey there- we've stopped collecting Q&A questions for now, but this one we can at least answer now. Short answer: None. The only commonly used military eyepro of that era were the SWD (sun/wind/dust) protective goggles, but very few are ballistic and none would be safe to use for eye protection today. Using modern eyepro with retro kits is commonly accepted; it's one area where there are few good options. If you want something with that look, check out Bolle Chronosofts.
For Q/A
Would you kindly post WE-Tech stuff? Their M4, glock, hicapa lineup maybe
WEs are kinda mid
Their hi capas are straight garbage
Thanks Guys! Brilliant!
Q&A question what tanks for hpa taps do you run on gbbrs, and what kind of round count do you get on a tank?
Completely depends on the gun and size of the tank
@@opairsoft8100 there gbbr aug lmg tapped for hpa
@@PaulJrCarns that still is a specific system, any other system even within the ghk ecosystem can be more or less efficient
Is the mag on 3:10 a umarex hk416?
VFC STANAG Gen 3
@@NomadikProd the feed lip looks like the kmw lm4 mags
@@TryHardAirsoft-x nope that is 100% a v3 vfc mag you can tell by the red bits and I have one right next to me. also i doubt somebody who's this into gbbs would be caught dead with an lm4 due to their issues.
@@TryHardAirsoft-x I'm one of the folks who helped him test it. Its a VFC STANAG.
@@theschreiberclan5479 i have a pts radian model 1 lol almost a year and i haven't had any kind of problem
QnA question:
The Main idea behind using a glock magazine PCC irl is magazine compatibility between Glock pistols and the PCC, but in airsoft there is only one gbbr that uses actual glock magazines that fit into glock pistols and that's made by King Arms, any ideas why aren't other companies doing this?
Just seen an MWS Magwell conversion for this today. Came with long glock mags, a magwell adapter, and a few other bits and bobs for like $250 Canadian I think. Was a neat looking setup. Haven't tried it obviously, but thought it was really cool. Mags look to load in the middle of the mag well instead of the front or back which I thought aesthetically looked better than the offset mags.
Q&A what are your thoughts on the G&G gas blowback MGCR?
@explosive enterprises can you do a review of the GHK M4 platform. I purchased one about a year ago, but I want to see your take on it.
I have 6 ghk mags(pmag v2) and It works perfectly with stock adaptor, or if you have ghk v1 loader tip.
Is filling speed increase noticeable when using higher voltage lipos?
No for KMP9 mags, right?
I'd like Catgut carring equipement breakdown.
With the ghk mags doesn't loading through the top of the feed lips cause the feed lips to crack?
Will you guys be reviewing that APFG Sig Rattler? I'm hearing its getting mixed reviews.
So how does it work without a torsion spring? Just stalls the motor until the force of the BBs pushes up the collar and disconnects the switch? That's really it?
How's it do with ak gas mags
for qna: unsure if you covered this last qna but are you gonna do any aeg content?
Krytek p90 mags?
Hey Can the loader load mags with 150-220 bullets that weigh 0.45 g?
I would love something similar to this for gelsoft use, since that's the only version of this hobby that's legal here where I live in Queensland, Australia. There's not enough innovation of new stuff going on it that space.
How does it do with EPM1s?
How fast can it load a midcap?
Now try it with a ump 45 mag, lol
This was my exact question!! Will it fill my UMP 45 mag because they are miserable to fill.
Straight up broke one of my speed loaders with how tough the UMP mags are to fill 😕
Literally looking to buy one for ump mags
bump, if anyone has any solutions please god share them here
I was wanting to buy a vfc ump but im scared now
Mine doesnt seem to load GBB mags, just stops loading after 3-5 BBs. Any fix?
Will it fully load an emp 1 mag?
Got a Q&A question. Will you ever review the WE Thompson and if so will you also provide some means to potentially make it better?
Where i can buy the battery?
Is it an evike exclusive? Cannot seem to find it anywhere else 🤔
It's by EMG, so most likely.
XE for the qna, and I know this question probably gets asked a lot, but what is a likely the best gbbr for people on a budget, I feel that a large majority of the time the people that say a certain budget gbbr, or any other gbb, is bad is due to them not treating their weapons right, could you give some insight on what you feel is beginner and budget friendly
how did you get this before evike preorder?
Id thought this would be like 150!
69 isnt too bad! Id actually think of buying one eventually.
How heavy is it when empty? (I gotta ship it internationally and 2lb cost 20 bucks so i gotta take it into consideration)
Reminds me of the Laylax Electric BB feeder, do you guys know that one too? How does it compare?
I have both of them. EMG is better..much and much
@@steyr357 In what way is it better?
@@sogerc1 noise speed power battery everything
@@steyr357 Yeah, I always thought that the Laylax was noisy, slow and not powerful enough but I like it very much that it works with AAAs, you can find those in the middle of nowhere too. I prefer red dots running on AA or AAA for this same reason, unfortunately those are pretty chunky models.
Can't seem to find it in Europe... :( *sad gbbr user sounds*
you can ask Evike Europe to stock them :)
Does it load the vfc 249 cassettes mate ? If it does I’ll pay good money for one 😂
can you make a silent mod for this please
Vt mag work?
funny my grub screw was also the same way........i said a lot of bad words lmao. this thing rips through epm1's as well not sure why ppl get so confused.
QnA: In your Northeast Uzi video, you mentioned you'd do an update on how things were going. Any news?
Q&A Question. Do you guys have a PO box? How does one contact you?
Wish they sold these in the UK - shipping from evike is notoriously terrible and expensive over here which is a real shame
Bz tactical in the uk now stock them me and a friend got one each
@@paulcrane9672 Shame they've decided to up the price from the $70~ (£55) shown on evike to a lovely £119, but hey. At least you can get one, plus it'll actually show up.
I'm in the middle of making a new gun from scratch. The mag is a midcap that holds like 300rds and there's no good way of loading it with an Oden. This will be a godsend.
You should try to get some sponsors even jet uses one of your files and mentioned you as who the person with the files
anyone try this loader with m110a1 mags?
for fricken 69$ thats a darn good deal and seems to work really well and the size is also great those other ones and way to big and pricey
well thats sold me me getting one
Price is a turn off, I can also get mags loaded fast enough that I don't feel bad skipping over it. Although if you want some extra time to attend to other things, doesn't seem bad
Favorite gun and least favorite gun you've reviewed
老闆上市之後麻煩給我連結，我怕我忘記他
🔥
TRANSFORMERS?
Yeah boii
Size and Weight?
Great vid, might pick one up when i can
It’s work with Mws ?