I like the gauntlet design. Reminds of how usually in western armor the left shoulder and arm had thicker armor, because most people were right handed so most attacks would come there.
I will always be amazed at how well Max factory managed to capture my look. Though I wonder, if I were to get a figurine of myself, would that be narcissistic?
It's a bit of a shame she doesn't come with a clear version of Excalibur, seeing as the sword is actually invisible most of the time :\ Looks godly regardless, though. GSC will rape my wallet once again ;___;
Great review! Her shoulder joints are new. Instead of a regular double ball joint like the other figmas have, she has more of a cylinder on the joint that connects to the torso and then the torso has a different connection than normal. I think it allows for a better range of motion and also is less likely to break.
I'm good with bootlegs tbh bit if it looks like a bind child painted it I'mma bring it right on back also if the joints r loose I'm good if like a arm or leg is loose but if all of them r IMMA BRING IT RIGHT ON BACK
figuarts and figma are the most comparable, when it comes to anime characters figma wins hands down, but figuarts seem to beat figma when it's realistic/superhero characters. As for playarts kai, there in a completely different category altogether, those figures are huge, and tend to focus mainly on game characters as well as superhero variants.
Just bought this one.. haven''t bought many figmas but everyone i do get has been of the highest quality! good smile and max factory are masters of the craft.
Hi Mecha, I've been following your channel for a few months now and I really love your reviews! Where do you suggest to go to look for rare/limited Figmas like White Rock Shooter? I've seen one at Mandarake a while back that seemed unopened.
Definitely an improvement over 1.0; gotta say I'm also impressed at the articulation, especially how they enginereed the skirt section. Oh, the shouting face is indeed very well done! I don't think the paint transfer is that bad considering it's fixable and down there...but I agree with you about the torso articulation being its biggest issue. Figma has yet to strike a balance between the current way of designing flexible torsos that are also kinda weak and hollow as opposed to the old ones that were much more limited but way sturdier in many cases. As a matter of fact, Cobra is a pretty good example of an almost flawless figma in those regards.
As always an excellent review, I am glad that add a humorous moments + impressive collection of figures! When will the review on the Guyver and Racing Miku?
I just love Saber. I wish I could have all the new Fate Figmas they're releasing, but I have neither space nor enough money hehe. BTW. About the paint transfer issue, I think this might be Max Factory's mistake. My Mikasa Figma also came with some black paint smudges and stains on pieces which didn't touch at all.
Brilliant! This is definitely an example of the pinnacle of figma design! I would love to see many of the design principles used here applied to a figma of _Centorea Shianus_! [slight spoilers below] Specifically her... ...'Fully Armored' mode. She'd be beautifully armoured, likely come with an unhelmeted head and a few expressions and equipped with an array of weaponry (lance, shield, two claymores, bow and arrow). What's more is that being a Centaur she will not only have more articulation that any previous figma, but also be able to hold her entire arsenal on her body! With the _Monster Musume no Iru Nichijou_ anime around the corner and the figma Plus horses recently released, it sets the stage pretty nicely for what could be the *"ultimate figma"* to date!
Great review as always :) +Mecha Gaikotsu can you tell me what brand of base you are using that rotates her at the end? I need to pick one up and I'm not sure where to start as there are so many choices. And many of them bad. Also I just ordered Saber from the recent reissue and i"m super excited about it.
Im glad you where able to get one after all!!, excellent review! and that´s a crazy collection you got there man im far from even a quarter in mine compared to yours XD
Thank you for the review I'm gonna be extra careful I would not want to break my figure stand. Saber is my favorite character ever so this is a must have for me! :)
I've been looking for one and can't find one where did you get it? I don't really trust eBay since they show the box without the authentication sticker
Hey man when I ever have any loose joints on my figures I just use future floor care and dab a dot on the joint it will tighten it good and strong but not to tight just add a dot and bam! Fixed but make sure we wait a day lol anyways hope that helps
Hi I'm one of your viewers and subscribers i want to know if you can do room tour so we can see how you store all of your figma and figures. So we can get a idea how we store our figma and figure i watch your review at Saber 2.0 i saw all of your figma but i think not all of your figma and figure have a review is there any chance that you will do all your figma reviews thanks
This is really a nice figma but the price really gone too high. I think we should request goodsmile company for rerelease for saber 2.0 and archer. Caster from fate extra is available for pre order now, and they are also planning to make Gilgamesh, I think it is really sensible for them to have a rerelease on these two excellent products from fate series. (Saber 2.0 and Archer)
Amazing figure and great video. Are you getting Rin Tohsaka 2.0? I am =D This is the first time I've watched one of your videos and they're so complete. Congrats! Cuestion: where did you bought that rotative base? I have seen something like that but for disaplaying cakes.
***** Tokyo Otaku Mode has a rotating base that features two plates (80mm & 120mm). It isn't mirrored like Mecha's is, but if you're placing cakes on it then I hope it won't be too much of a loss. $18 USD otakumode.com/shop/5554421a34ffe64865d4be1f/Battery-Operated-Rotating-Pedestal?lang=en Have you ever shopped with T.O.M. before?
I never really got into Fate until recently since UBW came out. The original series was very mediocre.. I tried watching it when it first came out (2006?) but never could continue. After watching Fate Zero and then went on to Fate UBW, I just absolutely love the characters. The animation, quality of art, and music are just so good. I'm not sure if Saber is my favorite character since Rin.. but this figma looks absolutely wonderful! I remember when you first uploaded this and I watched it just out of curiosity. Now, I am back to view this same video with real interest in the figure. I'm starting to become a fan of girls in armor, so Saber would be quite good. Plus, I have never owned a figma before, so this one may be a good one to start.. though I do have the Lucina figma on pre-order. Also looking into the Miku 2.0 figma, but I'm sure of it since it has bare skin.. which I am not quite used to as of yet for figures with joints. I will eventually have my Lucina, this Saber (hard to find a good price for it lol..), Samus, and Link! I'll probably just buy girls in armor, Nintendo, and my hopeful new Rin figma (with her nice, red trench coat hopefully..). I really do appreciate this review!
Mecha Gaikotsu a bit random but if i order something from good smile online shop, how does it work? Do they Charge the Japanese price then take it out of my credit card with the American currency??
I have her but when I took off her hand her peg broke but at least she comes with another one I had my dad take out the peg wit his mouth still love her and her hand is good
No, don't bother buying one. Send Good Smile Company a complaint from their website, including pics and stuff, and they'll send you a new one, free of charge.
![Figma EX-025 Saber Dress Ver. - Fate/stay night [Unlimited Blade Works] Anime Figure Review セイバー ドレス](http://i.ytimg.com/vi/4TGM8glmpM0/mqdefault.jpg)
![Figma EX-025 Saber Dress Ver. - Fate/stay night [Unlimited Blade Works] Anime Figure Review セイバー ドレス](/img/tr.png)
I like the gauntlet design. Reminds of how usually in western armor the left shoulder and arm had thicker armor, because most people were right handed so most attacks would come there.
I like that too, and even just from a design perspective a bit of asymmetry looks great
Well that's one way to show your collection tour..LOL..
altair4123 😂
altair4123 hahahaha yeah
👍😐😐😐🤪😂😁🤣😂😅😆👍
The prettiest knight lady!
I will always be amazed at how well Max factory managed to capture my look. Though I wonder, if I were to get a figurine of myself, would that be narcissistic?
It's a bit of a shame she doesn't come with a clear version of Excalibur, seeing as the sword is actually invisible most of the time :\
Looks godly regardless, though. GSC will rape my wallet once again ;___;
i just thought all your base belong to me and i just busted laughing not even done watching but great video man love the collection
+TheTXoso BASE BASE ALL YOUR BASE ARE BELONG TO US
Awesome!! I was actually wandering if you were gonna be doing this soon or not and Lo and Behold...YOU ARE!!
Love the sound effects from when you opened the box! I am pleased.
Dude you need to give us a room tour of your collection you cant just give us a little view of it please give a collection video
Great review!
Her shoulder joints are new. Instead of a regular double ball joint like the other figmas have, she has more of a cylinder on the joint that connects to the torso and then the torso has a different connection than normal. I think it allows for a better range of motion and also is less likely to break.
You should do a "How to spot a bootleg video".
I'm good with bootlegs tbh bit if it looks like a bind child painted it I'mma bring it right on back also if the joints r loose I'm good if like a arm or leg is loose but if all of them r IMMA BRING IT RIGHT ON BACK
robert sacramento easy if it’s super cheap it’s probably a bootleg
Very impressed with the upgrades over Ver 1.0 which had poor skirt armor alignments and limited waist articulations.
The Excalibur’s scabbard is Avalon perfect.
I dont own any figma but watching your reviews makes me want to get some.
They have that effect 😁
+Mecha Gaikotsu In your opion which is better...figma, S.H. Figuarts or the those playarts kai? Or do it depend on the characters?
figuarts and figma are the most comparable, when it comes to anime characters figma wins hands down, but figuarts seem to beat figma when it's realistic/superhero characters. As for playarts kai, there in a completely different category altogether, those figures are huge, and tend to focus mainly on game characters as well as superhero variants.
Just bought this one.. haven''t bought many figmas but everyone i do get has been of the highest quality! good smile and max factory are masters of the craft.
Hi Mecha, I've been following your channel for a few months now and I really love your reviews!
Where do you suggest to go to look for rare/limited Figmas like White Rock Shooter? I've seen one at Mandarake a while back that seemed unopened.
What an elegant figma
Definitely an improvement over 1.0; gotta say I'm also impressed at the articulation, especially how they enginereed the skirt section. Oh, the shouting face is indeed very well done! I don't think the paint transfer is that bad considering it's fixable and down there...but I agree with you about the torso articulation being its biggest issue. Figma has yet to strike a balance between the current way of designing flexible torsos that are also kinda weak and hollow as opposed to the old ones that were much more limited but way sturdier in many cases. As a matter of fact, Cobra is a pretty good example of an almost flawless figma in those regards.
As always an excellent review, I am glad that add a humorous moments + impressive collection of figures!
When will the review on the Guyver and Racing Miku?
Bless Otaku Mode's setup - 32 US for her re-release :')
I just love Saber. I wish I could have all the new Fate Figmas they're releasing, but I have neither space nor enough money hehe.
BTW. About the paint transfer issue, I think this might be Max Factory's mistake. My Mikasa Figma also came with some black paint smudges and stains on pieces which didn't touch at all.
Fate is my favorite franchise.
I really liked the pose with Archer.
Reissue in a few months along with Saber Musashi. So much hype
just preorderd the rerelease of this from good smile. i am very excited now
Brilliant! This is definitely an example of the pinnacle of figma design! I would love to see many of the design principles used here applied to a figma of _Centorea Shianus_! [slight spoilers below] Specifically her...
...'Fully Armored' mode. She'd be beautifully armoured, likely come with an unhelmeted head and a few expressions and equipped with an array of weaponry (lance, shield, two claymores, bow and arrow). What's more is that being a Centaur she will not only have more articulation that any previous figma, but also be able to hold her entire arsenal on her body!
With the _Monster Musume no Iru Nichijou_ anime around the corner and the figma Plus horses recently released, it sets the stage pretty nicely for what could be the *"ultimate figma"* to date!
I wish I have Saber 2.0. I only have the first version, which isn'tb ad, but ver. 2 looks way better. Awesome video by the way.
She's getting a reissue right now until Feb. 7 and re-release in Oct.
Got mine last weekend and it's gorgeous
Holy crap! That collection is massive! Noice
Great review as always :) +Mecha Gaikotsu can you tell me what brand of base you are using that rotates her at the end? I need to pick one up and I'm not sure where to start as there are so many choices. And many of them bad. Also I just ordered Saber from the recent reissue and i"m super excited about it.
Looks cool, but I prefer the old one (which I own haha)
SABER BEST WIFU!
Awesome video I love the fate figmas and are you planning on getting the other new ones coming out like rin? Mecha Gaikotsu
lauren012938 Sure am, glad to see another Emiya coming out
Actually I' ve got that figma AND the detail Is fantastic, but the joint under her dress AND the torso joint are little bit loose
"The other three, are connected"
Im glad you where able to get one after all!!, excellent review! and that´s a crazy collection you got there man im far from even a quarter in mine compared to yours XD
Will you review the Satsuki figma that's gonna come out soon? (from kill la kill)
Thank you for the review I'm gonna be extra careful I would not want to break my figure stand. Saber is my favorite character ever so this is a must have for me! :)
Your figma collection is huge. Could you do a video on your collection?
Nice review.
Cool Jakarta I will, but it's on hold for a couple of months because I'm going to be moving soon
I've been looking for one and can't find one where did you get it? I don't really trust eBay since they show the box without the authentication sticker
You should definitely do a video to show off your collection! :D
I have watched this vid pretty many times
Those collection!
Nice review.
well, i think you must make a report to GSC Customer Service to give you a spare part for that stand base
Onoda (from Yowamushi Pedal) next please!
Hey man when I ever have any loose joints on my figures I just use future floor care and dab a dot on the joint it will tighten it good and strong but not to tight just add a dot and bam! Fixed but make sure we wait a day lol anyways hope that helps
Awesome Man I Love it 2.0
Hi I'm one of your viewers and subscribers i want to know if you can do room tour so we can see how you store all of your figma and figures. So we can get a idea how we store our figma and figure i watch your review at Saber 2.0 i saw all of your figma but i think not all of your figma and figure have a review is there any chance that you will do all your figma reviews thanks
Waiting patiently for Figma Kanade Tachibana(Tenshi) from Angel Beats..... Dammit Goodsmile please make one TT^TT
i saw this for like 45$ at a local store, should i pick it? fuck it i will do it
Do it!
figma could have Fake :D
+Mega Umaru nah bro, i got it and it is as real as the sun above us, one of my favorite things in my collection
>paint transfer
And that's why I prefer Chogokin Saber over Figma 2.0. True die-cast doesn't have these troubles ;p
This is really a nice figma but the price really gone too high.
I think we should request goodsmile company for rerelease for saber 2.0 and archer.
Caster from fate extra is available for pre order now, and they are also planning to make Gilgamesh,
I think it is really sensible for them to have a rerelease on these two excellent products from fate series. (Saber 2.0 and Archer)
I would think they'd do it when Heaven's Feel comes out...then again we're more like to get a Saber Alter 2.0 or something I dunno
Good news: there's a reissue going on right now.
yes! hope they will rerelease also the archer figma which is also very nice too
BlackJacky1012 I'll buy it right after I can get my hands on Slan.
ordered it today
Amazing figure and great video. Are you getting Rin Tohsaka 2.0? I am =D
This is the first time I've watched one of your videos and they're so complete. Congrats!
Cuestion: where did you bought that rotative base? I have seen something like that but for disaplaying cakes.
Sure am!!!
***** Tokyo Otaku Mode has a rotating base that features two plates (80mm & 120mm). It isn't mirrored like Mecha's is, but if you're placing cakes on it then I hope it won't be too much of a loss.
$18 USD otakumode.com/shop/5554421a34ffe64865d4be1f/Battery-Operated-Rotating-Pedestal?lang=en
Have you ever shopped with T.O.M. before?
Are you gonna review the Sh Figuarts sasuke uchiha figure?
I thought you only review gunpla. Never thought you also like anime
I hate to be that person asking this, but how many figma's do you have at the moment? I'm kind of jealous...
Hi, where do you buy authentic figmas and nendoroids at? I bought some online before and all I got were bootlegs.
I suggest Amazon
Solus Prime Tokyo otaku mode. worldwide shipping, no bootlegs
Genji Shimada Cool, thank you
Schneider W Cool I will check them out, thank you
I never really got into Fate until recently since UBW came out. The original series was very mediocre.. I tried watching it when it first came out (2006?) but never could continue. After watching Fate Zero and then went on to Fate UBW, I just absolutely love the characters. The animation, quality of art, and music are just so good. I'm not sure if Saber is my favorite character since Rin.. but this figma looks absolutely wonderful! I remember when you first uploaded this and I watched it just out of curiosity. Now, I am back to view this same video with real interest in the figure. I'm starting to become a fan of girls in armor, so Saber would be quite good. Plus, I have never owned a figma before, so this one may be a good one to start.. though I do have the Lucina figma on pre-order. Also looking into the Miku 2.0 figma, but I'm sure of it since it has bare skin.. which I am not quite used to as of yet for figures with joints. I will eventually have my Lucina, this Saber (hard to find a good price for it lol..), Samus, and Link! I'll probably just buy girls in armor, Nintendo, and my hopeful new Rin figma (with her nice, red trench coat hopefully..). I really do appreciate this review!
looks like it went for the takeuchi design that was used in realta nua rather than the new UBW anime ver.
i like the way u review :) :)
Figma Saber 2.0 Vs Pacific rim Gipsy Danger 2.0
Can you do a figure collection videos?
Mecha Gaikotsu a bit random but if i order something from good smile online shop, how does it work? Do they Charge the Japanese price then take it out of my credit card with the American currency??
1upsuper alright sweet thank you
Too bad that youre not in japan anymore, I dont expect early figma review from you anymore😣
I found this complete in box for 2 dollars at a flea market
re release coming 2015 in may so hyped
Yea i just got mine ordered from the re release as well and I'm super hyped too
any recommended website to purchase this figma?
hobbylink Japan
You should mace a collection video
Epic Review, sasuga Mecha Gai sensi :)
just wanna ask, do u use Sony Vegas to edit make ur videos?
or what do u use?
Who else was a bit bothered when he said "Perpendicular" instead of _parallel?_
Also....
BASE BASE ALL YOUR BASE ARE BELONG TO US
can you do a "saber (first edition) vs saber 2.0??
I bought one but it keeps braking down.
I need this.
I got mine last Friday xD
What is the difference between the regular saber and saber 2.0?
+antivenomeddiebrock 2.0 probably incorporates some better design techniques and stuff
I have her but when I took off her hand her peg broke but at least she comes with another one I had my dad take out the peg wit his mouth still love her and her hand is good
I think you got the sword names backwards.
Ah ok! Uohsnak and Ayakab it is then!
i wonder you been talking that way, will it hurt your throat?
The inside of sabers hands should not be silver they should be brown.
How do you fix a figma base?
10:55 was that a JoJo’s reference.
You broke the fourth wall.. And base lol
Es muy linda me encanta la espada y que lleva la tengo no pienso venderla xD .
I need this,but I also want sh monster arts Godzilla birth ver
hunter guadiana I hate those times when it comes down to one figure or the other! I feel your pain!
but can you review Godzilla figures
room tour...?
65€ but worth it
Yeah I broke my figma stand so...does anyone know where I could get a replacement because I cant find one anywhere.
you need to buy a Di:Stage,
but good luck for find one and one Under 150$ TT-TT
No, don't bother buying one. Send Good Smile Company a complaint from their website, including pics and stuff, and they'll send you a new one, free of charge.
Armin F-ing Arlert SERIOUSLY! Thanks :D
Armin F-ing Arlert Will they do the same if you bought it not directly from Good Smile like Amazon?
Yep, just say where you bought it from, so check the Amazon shipping infd just in case. worked fine for me :D
never seen your face and I've been watching for a year now.. weird.
That It's 2.0
1.....weeeeeek...and........I can........have it.............
2... Month...and........ I can..........Have it TToTT
Hello everyone I've come from the future.
yo me too. Why did he used to talk like this tho?
Too much sarcasm in one video.. just sayin.. !!!!
Not not bot
This Figma figures are pretty expencive and shitty quality, i got mine just today and while playing with it I just got it broken on the waist part
No that is a lot of figures.
5:23
His voice there! 😂 (im bot a hater