THE WORST Cheap Transformer Devastator Knockoff (Under $20!)
HTML-код
- Опубликовано: 2 окт 2024
- This cheap Transformers Devastator from Ali Express costs under $20! But it has one MAJOR ISSUE preventing it from being even passable.
Buy the figure here!
www.aliexpress...
Follow both my Instagram's!
/ mechazeereviews
/ zdbimages
Follow my Twitter!
/ mechazee
Support me on Patreon for $1 a month
/ mechazeereviews
Etsy Store!
www.etsy.com/s...
Check out my other videos!
Cang-Toys HugeRhino (Predaking Combiner) - • The Curious Reason Why...
Generation 2 Optimus Prime Review - • Generation 2 Optimus P...
Legacy Hot Shot - • From OLD to GOLD! - Le...
Some of the music is from
www.tandess.com
Amazon Wishlist
www.amazon.com...
Channels I recommend watching
/ @jobbythehong
/ @gei4mei
/ @zerogokinreviews
I will concede as a fake Transformers fan I got some of the names wrong. I was in a silly little spot mentally when making this video.
The mistakes are being cut out via the RUclips editor at 1:12 and 2:07. It might take a few hours to update. So if you see comments about it and don't hear me misname them that's what happened.
Thank you everyone for letting me know of my mistake and I do apologize. I will try to be better about it next time and I appreciate you all🫡
Wait you like furrys?
were do u bye it
@@eduardodelacruzsr4285as a furry, Catgirls do not count as furries. They’re just girls with cat features. A furry would be a cat with girl features.
Can I have that transformer transformer
Нормас
Of course it doesn't hold. You didn't connect it correctly. You need to insert the pegs of the arms under the chest on the holes first, then you need to place the back inside Longhaul's arms.
alright nerd
@@snjix. i dont see how it makes them a nerd when they are just trying to explain
@@snjix. No problem sweety
that guy didn't know what to write so he wrote "nerd"
@@snjix. why '' nerd ''
Jobby: "I know the word 'swivel' is spreading like cancer."
MechaZee: "You're probably tired of me saying 'detail' at this point."
Ну и...?
This is a great cheap devastor. If you assemble it properly the large form works well and the miniature bots are quite well detailed. I will say though my version has die cast parts on all the robots.
I’ve got that one, too. Larger in scale, so works awesomely with larger figures!
I got a yellow version of this one for Christmas, but I lost the instructions paper. I am now looking for videos on how to combine them into Devastator.
Yeah, this works. I have the Combiner Wars one but I've run out of room so back to the box it went. This is perfect and the same as size as LE Volcanicus (if you stretch out both his legs) so, it works.
Found this in my aunt's shop, cost only 10 dollars in Malaysia lmao
I got this exact set last month, and I love it. For the price I think it's great. I'm not sure if you got unlucky or combined it incorrectly but mine is solid as a rock, I can shake it around and it doesnt fall apart like yours does. The buyer i got it off used the generic stock images of the toys this is a KO of so it showed paint detailing and accesories (individual guns for each constructicon) that arent actually present in the set but considering the price I really dont mind. I love these little guys
do you have the link to it still?
He combined it incorrectly lmao
i just received this same set a few days ago. i was about to scream and complain "parts missing!!" to the seller till i saw this video honestly LOL and i agree, i thought it was a very solid figure when i finally figured it all out.
Yeah these 3p are hit or miss, but this is a hidden gem
Funny thing is this is a knock off of a 3rd party combiner called hulkie (cause copyright) from the company dk9 more specifically from there war in pocket series.
Thank you. I was trying to figure out what this was a copy of. I figured it was a KO of a third party but there’s so many lol.
Bro the bulldozer is Bone crusher not scrapper and the pay loader is scrapper not bone crusher😂
I have this, and I absolutely love it. For £19 it's awesome (and I can't see the far more expensive Core Class Volcanicus matching up, tbh.)
I am so disappointed with the look of that Volcanicus. My hype for having core class dinobots has completely vanished.
I'm glad it's good, because it's on my wishlist. I want to collect mechas and I don't care for KO's and offbrands 😂
Hasbro needs to make a decent combiner that isn't 300-800 bucks
Its $5
I've seen a few Devastator KOs that are much much worse lol.
Well, for a under $20 knock off, it doesn't look too bad, honestly I would get this and just have it on my dresser or something until I actually get something to put my transformers on
(And please for the love of God, I hope him saying Bonecrusher was Scrapper and vice versa was a joke, as a Scrapper fan it hurt)
True
I noticed the same thing. Internal rage.
As an owner of a copy of this figure I can confirm that he put it on loose
So for me the front section just doesn’t connect properly when combining the two halves.
I remembered I found a Bootleg G1 Devastator toy. I and had to say, it is by far the most heart breaking thing I’ve ever bought because when I was a little shit. I thought it is a G1 Toy. But then it broke right away after I played with it. Once. But again, this was when I was like 4 years old.
You messed up bonecrushers and scrappers names
If the peg between the waist connection is loose, you can dab some super glue on it to make it thicker, or you can sand the pegs to make them more loose if their too tight.
Note: got these tips from JobbyTheHong.
Acrylic floor polish can be painted on any connection parts that are loose. Let dry (dries clear, of course), and assemble.
Got the same but in the yellow version. No problem with the torso connection. Mine doesn't pop off like ur does. Pretty solid on my part.
I've got this and I fitted mine correctly and it stands perfectly and I think it really is a great figure for the price
For the unresearched, like this video, this is a KO of the DX9 War in Pocket series Devastator, and yes he's transforming it wrong that's why it doesn't stay together
this would be good for a SS core class if it was upgraded
Nice engineering (if not quality) luv Hook's crane hook becoming the chest wing for Devastator
FUN NOTES:
1: Scavengers bucket slides up closer to the chest. So no more empty space.
2: Mix Masters Purple mixer part can fit on the end of Devs purple rifle.
3: Some Lego weapons fit in the bots hands. The sizes do vary.
This looks cool and probably more practical assembly, i have the combiner wars KO, has issues with the separate vehicle transformations and with assembling Devastator, it's really like a puzzle, but once assemble, really has more of the old school Devastator look than this one does
7:53 Put neodymium magnets and sand the male insert a little, and that's it!!! DON'T complain, it's well thought out, it's good.
Not sure if you were unlucky , but I got one and was able to get the two pegs holding top and bottom in fine , and its pretty sturdy , the trick was leaving the arms sort of loose , and placing them one at a time . Anyway thanks for making the video as MY GOD are the instructions bad . still though I'd recommend it
I have a set of them to I'm trying to figure it now that I seen this video it helps thanks for reviewing figures
I own the set and I couldn't be happier with my purchase. Only thing that I wasn't happy with was the gun not staying with in the hand and it was an easy fix . You haven't done the combining correctly. Absolutely worth the money.
i bought that a few years ago and the leg broke off when in combined mode after he fell off my very low table and on to my couch so thats a bit goofy
I had a bootleg of this bootleg! it was absolutely awful so don't complain!
I don't really think it's a the worst maybe worth it you just need you give it adjustments or is it just me
I had two versions of this ko its a solid set in my opinion some ones might be hit or miss but for the most part neat little figs
I have one of these constructicon bootleg and it is good but I do not know how it will be with the others xd
B R U H
1:13 Thats not Scrapper, that's Bonecrusher, the next one IS Scrapper
Bold Forms Gladius flashbacks, anyone?
gives me core class vibes.
For the cash is a great set, paid around £13 for mine, in fact, i have one combiner and one in bot modes
I have an upscaled KO version of this. It was much better quality and also for some reason each robot has one part in their chest made out of die cast.
I remembered having a bootleg devastator, it was my first ever g1 transformer figure
It’s funny that the most bootlegged Transformer I’ve seen is probably Devastator
Some nifty engineering ideas in that set, like the crane arm becoming Devastator's chest plate. But on the whole, I think I'll stick with my TFC Hercules.
Great review 🎉thank you, can you share the link of the product? I think for 20 is amazing
This was my first devastator combiner, it was very good to play until mixmaster and long haul broke then i had to buy another one…
Couldn’t use crazy glue to harden the connection to the waist
I actually liked it so much I ordered a second one
Best skibidi editor I've ever seen
No you’re talking about UTTV not Prime
@@DulceIgle this was 1 year ago youre late
If the made a core class devastator, id want them to sell the whole set in twos at deluxe proce point
I managed to connect the 2 halves together by connecting the pegs while using my brain
I have this exact set. Its not as bad as initially thought. Combined mode arms are kinda stumpy though...
I found this at a store 3 days ago.....
Meh, its still good for being 20 bucks
Okay; first off I want to say that I am a long time fan of Transformers. Do I know everything about them? Of course not and I doubt even the developers and higher ups who’ve been with Hasbro and Takara Tomy the longest even know given how it always seems like they have maybe three right hands and two left hands and two or three heads or whatever and almost neither of them understand the others train of thought. Sad but true.. Anyway; about this set. Sure the DX9 Hulkie set (still in production even after DX9 was bought or merged) has several flaws, but even mainline and other third and fourth party figures have their ups and downs. Look at the Legacy Core Evolution Dinobots which had really caused this set to be one of, if not ‘THE’, main go to sets that scale well with it. Of course there are two size scales of both the G1 and G2 colors for Hulkie, but the original size is the War in Pocket series sized (Core Class) scale. And no matter the reviews; this is one that requires a more in person perspective as no two peoples opinions are always going to be the same. Especially since the current company that develops these have different molds of them in core class size even though they appear almost exactly the same. I know this because I bought a couple from a single seller. I first bought one and was pleasantly surprised with how decent it was and can’t help but compare the quality to the original G1 and imagine how much potential this set has with some updating since these are now fairly dated molds, but still perhaps what we could have had instead of the original Constructicons that even had a missile slapped onto the side of Devastator’s head for some weird reason (and even reproductions of that set are still a little on the flimsy side). Anyway; each robot is simple enough to transform and to even combine although there are some flaws that some upgrading on the companies end could easily fix although two of the robots (Hook and Long Haul) could use some redesigning for some obvious reasons if you check them out for yourselves very carefully like with how they transform to and from robot mode and their combiner modes. Anyway; I had bought a second set thinking it would make a good gift, and they can, and decided to perform some work on them like straiten out the faces on both Mixmaster’s and that is when I noticed the differences. One set uses longer screws and the other uses shorter screws. I also noticed one sets purple, red, and even silver paint hues where slightly darker while the other sets were a little brighter. Taking all this into consideration; it could be an easy hit or miss for anyone, but if you buy it and enjoy it enough yet feel it’s lacking a bit. There is an upgrade kit out there that you can buy. Be sure to check that it’s for the War in Pocket size as these guys do come in one other size with individual guns that form Devastator’s big gun. There are roughly three colors, I don’t know who sells the orange set nor do I know if it sells in both sizes, but the G1 and G2 colors come in core class size and I think what is more deluxe size close to Combiner War deluxe sized if not still just a little smaller. I think all of the upgrade kits I have found online so far only come in one size though since the more core class equivalent appears to be the mainstream version. I haven’t yet bought one myself, but the upgrade kit does look like it would be a must have if you have difficulty with extending the combiner mode connectors in Long Haul’s feet and if you want a more backpack like look by folding up his legs. The upgrade kit also has arm upgrades for making his lower arms appear beefed up. But even without those; this set has a more all-inclusive feel. You can even plug the hands into Scrapper and Bonecrusher and just leave them even though they do look a little out of place although you would have to remove the hands if you want to swap them around since they are the only two limb bots that can be used as either arm. One word of caution; be careful when handling Hook. Always make sure Hulkie/ Devastator’s head is folded out before completely separating his legs for combiner mode or you may accidentally break something and always make sure Devastator’s face is folded inward when stored into Hook’s body or you’ll need to press the head out by pressing the tip of something through the hole in Hook’s abdomen. And the best method I found to link Hook with Long Haul is to first connect Hook’s arms and then carefully aligning his abdomen with Long Haul’s and press down for a firm connection which actually holds very well. You may need to go over checking the connections a little, but it should be solid as long as everything is lined up well. Also keep in mind that Long Hauls shoulders do slide which can either help or hinder the connection although Hook is usually the one whose arms need to be more carefully aligned to help form the shoulders so they can lock with the chest plate. Pretty much no different from anything else really and when compared to the official and unofficial combiner war themed combining transformers; these guys are very much less of a hassle. I have Victorion, Abominus, and Predaking from the Prime War Trilogy and those three sets make me even want to buy a larger version of this set. Again; I just don’t know if there are any upgrade kits for sale for the larger one that I know comes in both G1 and G2 colors. The backpack like look does have some appeal to it and it is a little annoying folding out the connectors in this Long Haul’s feet. And you get what you pay for. This is a great set to have if looking for something that fits a low budget and is simple. Just take care of letting a child play with it as there are some safety cautions to address like the forked like tips of the scoop/ shovel’s on both Scrapper and Scavenger being a little sharp (Bonecrusher is the only one that has them rounded/ smoothened out for some reason). You should be able to figure the rest out from first hand experience which is recommended if you do buy them as a gift set. Two more things about Mixmaster; 1. His individual robot legs become very loose and are perhaps more ideal to fully extend even if it makes him look odd unless you can apply a fix to strengthen their placement. It certain doesn’t help that his actual feet do not extend all the way as they should. And 2. It is recommended to tilt the small cannons/ guns/ missiles at the top of his head so they are in a decent enough angle, they do not need to be folded all the way down, when in his leg mode so Hulkie/ Devastator has a full knee bend in the left leg. Hope this helps and I apologize for the lengthy comment and lack of spacing. I am having difficulty applying proper spaces on here for some unknown reason..
First time watching any of your videos! Great review! The set looks neat, but not worth the $20! But I understand the challenges of building figures that small and on top of that squeezing so many features on them as to not have too many extra pieces as with the originals (love Hook's crane was made useful in combiner mode). But I feel pity for Long Haul! Seems to me he can't just get a decent enough design! The Combiner Wars design is the worst I've seen!
My version is bigger bout an inch shorter than CW Bruticus. I really like it and no issues. The individual bots are Bumblebee Movie size deluxes.
Got it for 6 dollars(did u overpay? For a bootleg 😅??) . It's great and the plastic n joints are surprisingly good.
I got myself advertised as this but it's a knockoff of a knockoff from china with every noticeable difference 🤦🏻♂️🤬🤬🤬. Even local e-commerce shopee malaysia said it looked the same 🤬🤬🤬 & wouldn't refund.
i got some at 7 11💀
Only honest review I can found about this KO Devastator. For the price, both the robot and construction modes are very fun to play with, but in the Devastator mode, I totally agree with the difficulty in securing the upper and waist together.
My friend suggested me this channel as an another Jobby-like channel...
At first I wasn't sold, but that rotation, self doubts and issues (?) and weeb stuff convinced me otherwise 🤣🤣🤣
You are not connecting the devastator torso properly, is this for some forced comedy ?
I ordered one and had no problems. This Thing is awesome. Instructions suck. But the torso holds strong when all the pegs are in correctly
❤😊🎉 robota torment jest lepszy
He got confused over Scrapper and Bone Crusher.
I have a variation of this set that has purple marks in some bots and overall holds much better than this one it seems.
Honeatly if Hasbro was smart theyd made core class release of devastator. This figure l, qhile bei g cheap and having its issues, does at least show a core class devastator is possible. Hasbro would honestly make a lot of money if they stared makjng core class devastator like what they did with the dinobots.
This guy has been my devastator for years, I wasn’t a fan of CW scale, but mine has sturdy connections. Maybe you got bad QC?
That's a great Devistator. The Devistator I have is so bad they didn't have the Licensing for the Decepticon logo. I wish I had the Devistator in this video. Mine the arms won't stay attached.
I have that😅
So impatient and over critical, because I find my figure is just fine plus, you didn’t even peg them in all the way
It's able to separate, that isn't that bad
When Mike made Bayformers ROTF wrong
Mixmaster: head
G1: left leg
"You shouldn't give much thought to anything" any theorist: and i took that personally
Good review. I have the metal OSKO version of this mold
What the f...k was wrong with that excavator?!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I would still get this if you link the items description I would buy it because I just love devastator
are these new molds or are they bootlegging an offical or third party fig?
i bought the same mixmaster's arm easily broke off and i cant turn it to devastator because the feet connection broke
for context, this seems to be a bootlegged version of a third party set called Mech Fans Toys Hercules
Wait where do you buy this? Mine is so hard to transformers and random tiny pieces keep falling off
Outrageous other reviews devastator dont fall apart
Yooo
I have this Bootleg devastator I baught it last year cost 550₱ from shopee (because I'm from the Philippines) because it's on sale and I still have it no Broken parts and stuff
I bought devastater the one from hasbro and i think its comeing next weekend
lmao you just got a bad one lmao, mine is just fine. and snaps in perfectly
Mine is fine it has some loose parts on the individuals but the combiner is solid and stays put
If someone could help me with the loose part it would help a lot
i have this , its not a bad toy, you have to peg the one arm in first then the middle peg and combines peg in the back as well as use the tabs ont he crane hook to lock the shoudlers in better
So, horrible aaand cheap must buy.....
😆👍
I got this devastator but Long haul broke and I can’t fix him
I got hook and bone crusher if u dont be careful the legs will loosen and the arms
wait you got this for under 20 dollars? i bought it off amazon for about 80
Dad bought me this doesn't the package have japanese words?
i somehow got a knockoff of a knockoff of this where it costed 60$ instead
I got this guy off ali express and have had no problems except for the heels on them
i got to say for under 20 dollars i think its a steal and really not that bad i would buy it in a minute
Bro mixed up scrapper and bonecrushers name's -_-
It does kind of remind me of the Gobots from when I was a kid" yes I'm that. old ha ha"
Its a knock off version, what do you expect? 😃
Bro this ain't Devastator this is constructineer
the original thirdpartie version Hulkie is more stable /better
Nah, bro. I got the same one, and I absolutely love it.
You got scrapper and bonecrusher mixed up
Core class dinobots vs the core class constructicons!
The second robot is bonecrusher and the third is scrapper dumb
i had one and a love it so much but sadly the long haul legs broke :(