Это видео недоступно.
Сожалеем об этом.
Grasshopper 006 waffle structure beams concept & fabrication
HTML-код
- Опубликовано: 9 авг 2018
- Waffle Structure is how you can Convert complex surface to Your Ceiling Structure Concept With Joints And Fabrication All Parts Or Design A Pavilion Structure for architectural and design . via Rhino & Grasshopper .
you can download files from here : bit.ly/35lVYbS
follow me on facebook : / uthardesignstudio
follow me on instagram : / ma3an_designer
#Rhinoandgrasshopper #architecture #parametric
Music by Approaching Nirvana
/ approachingnirvana
Song: KYOTO
Buy the song on iTunes: bit.ly/R8hVSy
Any Comment or Question >>>>
hello, I want to ask why the grid I create include the first line and the last line ?
If I have understood your question well >>to avoid inappropriate intersections or radial intersections
Can you make a tutorial on a gridshell roof, like for example the Nine Bridges Golf Club House. Thanks
My mind have just blowed up... Im designing special purpouse molds for concrete for years via AutoCAD and this period have just finished :) I have must become more familar with RIHNO !!
Sounds good 😊
Very exellllllllllllllent
I'm from Iran
Thanks for all video toturial
Hey 👋 thanks for your unique comment and you’re welcome and hi for Iran 🇮🇷
This is fantastic! Could you make a Grasshopper tutorial on how to design the Kengo Kuma column system?
i think that's interesting >> i will done
Just amazing and complete worth seen It. I just wondering if mine extrude lines were smaller how can i do to see the little acoplation details.
Hey 👋 thanks for your comment and you’re welcome 😉.. so if you want to see more details in your stuff ! Is that was your problem? If I understood well tell me what details you want to see like what? 🤔
Thanks for the tutorial, I had to slow it down, since I'm still a noob.
Thanks for your comment and sorry for that if it was so quick🙃
Hi, I’ve been following step by step, but once I get to extruding the curve it’s not starting from where the actual curve is, instead its forming a straight line there and extruding from that
Hello 👋 thanks for your comment.. hmm 🤔 let me see your gh file if that possible to check what's going on send me a message via discord server here : discord.com/invite/yKbM57kX then send me your file privately
Very nice tutorial. Thank you.
Question: How can I add another row of beams on the outside/edge of the structure so it closes nicely and you don't have to see all this "flying" beams. Like a picture frame if you know what I mean.... just extend the contours and include the edges that create the frame. thank you.
Thanks so much and you’re welcome 😉
Thank you
Thanks for your comment ☺️ and you're welcome 🤗 any more questions ❓ can do that via discord server here : discord.com/invite/cN9WG3htFr
hello I want to work with a stl file from fusion. how do I transfer it into a brep. I only can work with it as a mesh but I need brep?
Hey 👋 yep u can do that by deconstruct mesh and pick vertices as 4 lists then create a 4point surface 🙃
hello, i have downloaded and it works except the creating 2d shapes having error at Brep-Plane (Intersection Failed) any advise pls?
Hey 👋 just review well step by step
Oh Man..!! Thank you so much :)
You’re welcome 😉
Thanks man
you welcome >>>>
By any chance can you obtain the centre line of these beams?
Definitely yep sure you can get an axes🙃
In 5:30, my rhino shows error : data conversion failed from surface to plane, but I already follow ur step
Hmmm I don’t know what’s going on but you can tell me in any step this error shown
Same problem
It feels like you are doing many unnecessary steps... By good job anyway!
Is there a way to edit the surface after we have the lattice?
If you use an object from rhino you can edit it from rhino , but you can create a surface inside grasshopper algorithm well 😊
I have to publish other way to do that it’s easiest from old way 😉 wait me as soon as possible ok 👌
hello, at 6:52 it also creates me beams on the edge of the surface, how don't you have them ?
Follow my steps clear to know how do you dispatch edges ;)
i have the same question
@@parastormlab4866 It seems like there was a cut in the video at 5:24 and that's when that line doesn't appear anymore
When you use the Brep, it doesnt 'solve' the intersection between the extrusion and the edges of the surface...but why?
If you want send me your applying file to see what going on 🤔
love the bgm LOL
THIS SYSTEM IS GOOD , BUT IF YOU USE PANELING TOOL IT CAN BE DONE WITHING 4 MNTS
Yep sure I did that for beginners and there are a lot of ways to do that 🙃 thanks for your comment and I appreciated
@@parastormlab4866 your great teacher
The link to the files isn’t working. Any possibility you could re link them. Cheers
Ok don’t worry I’ll see what happens then I will send it for you thanks for comment
@@parastormlab4866 okay cheers.
@@dylanstewart2964 drive.google.com/file/d/18m2ea_U3Lj9YkDHJuzPixmaLvru2BY9f/view?usp=sharing
@@parastormlab4866 very strange, same problem, can't seem to access the grasshopper file still. its got an .rar file?
Unzip file first then send it to grasshopper ;)
You’re clicking too fast, hover over your selection for a while before selecting
scylla019 sorry for that but some people need me faster!! What can I do... thanks
ParaStorm thanks for the great video. Maybe bifocals plug in or tell people what item you selected
Sure I’ll do it
okokokokokoko
did you learn grasshopper like a week ago? and did you name your channel 'para LAB' to look like a some sort of an expert? because if so... that's just so sad...
Nop this name is for my lab as collaboration startup working I explain something easy for beginners. Don’t be nervous 😬