A great video these are really good surveyors I like the fact they did all that without the need for all the fancy equipment and still did it perfectly. Cheers. I would watch more like this I love to learn from people can show a more simple way to do this.. Thanks for sharing.
Dear Mohan, I have for the first time seen a useful video on construction, very practical, thanks so much. Mohan I have a suggestion, you make a DVD with all such step by step construction videos starting from this foundation laying video. However you have to refer back to the plan document and show comparing to the plan paper. Also you did not explain how you started out on the base like and what it refers to in the plan. I hope you will continue to post these wonderful videos, I am ready to buy such a video which shows end to end construction for a layman like me even if it costs Rs 5000. But as in this video it should be understandable to even laymen like me. I am sure you will sell millions of your DVD's. ALL THE BEST Mohan. Thanks Prakash.
sir aapne bht jaldi ye vedio bnayi. sir ap bht ache se samjhate ho. agr aap aisi vedio bna diya karoge to kisi boys ko training ki jarurat nahi pda karegi
ek questions bhi hai sir ki.. aapne columns ki marking de di or peg bhi laga di, par jab excavation hoga tab ye peg to hat jayenge....to fir hum measure karenge wo bhi bina koi marking ke...??
The decision of base point reference with respect to the site needs to be explained how it is decided? What can we do if we need to use JCB to dig a foundation ?
how the base point was taken as the plot was clear and area which was to be built was not mentioned or according to drawing.i think the surveyor is to find out base point? me right or not?
bro your mark of all points using peg.....then after how to you find the center point of a specific column...I mean how to draw four sides of column boundary line by using powder.......
After excavation how can you take refferance from which point before excavation your peg will be removed then after excavation how can you take refferance where you marked before upload such video check carefully got it my point
First of all we need a Centerline drawing and a set-out drawing. Set-out drawing which shows the site plan and setback of the building , with that drawing we get the base line of the building after tieing those base lines we use centre line drawing to tie all the inner wall.
Sir your video is very nice and your attempt is wonderful...i have a small doubt in the foundation marking technique where i find lack of endeavor in bringing the peg at the center of the square...is it not necessary??
what is the size of the square markings marked with chalk power it is 3 feet X 3 feet or 4 feet X 4 feet ? I am using your video to measure lengths using computer program. Your information will be helpful to me.
Marking is not parallel to the road. It's essential to maintain foundation line parallel to the road duly maintaining the prescribed offset using 3-4-5rule.
Sir, we have a big water well beside our empty plot in village. Well is constructed with rocks. Now, we want build a house (G+1 (only 1 room in 1st floor )) .how much is the safe distance between well and house?
A great video these are really good surveyors I like the fact they did all that without the need for all the fancy equipment and still did it perfectly. Cheers. I would watch more like this I love to learn from people can show a more simple way to do this.. Thanks for sharing.
One of the best videos I saw on foundation layout
The most practical , easiest and best way of foundation laying…. Salute to you Sir!
3:01 superb sir ... Within 2 sec .. totally clear my daut regarding right angle method
Thanks brother for well demonstration. Keep it up and share your experiences to new comers.
Dear Mohan, I have for the first time seen a useful video on construction, very practical, thanks so much. Mohan I have a suggestion, you make a DVD with all such step by step construction videos starting from this foundation laying video. However you have to refer back to the plan document and show comparing to the plan paper. Also you did not explain how you started out on the base like and what it refers to in the plan. I hope you will continue to post these wonderful videos, I am ready to buy such a video which shows end to end construction for a layman like me even if it costs Rs 5000. But as in this video it should be understandable to even laymen like me. I am sure you will sell millions of your DVD's. ALL THE BEST Mohan. Thanks Prakash.
uk
Study 10th grade maths geometry..
GOOD JOB BROTHER A.MOHAN THANKS FOR SHARING
This video is very helpful.
Thanks for uploading such video.
The first two points are consider as
1.outer boundary point (or)
2. base point of the road
Thanks sir ji
Moh
Nemat Boos w4ee
Mohan A hhh
in Dan.sex.
Excellent video and good demonstration sir. Looking for more videos.
sir aapne bht jaldi ye vedio bnayi. sir ap bht ache se samjhate ho. agr aap aisi vedio bna diya karoge to kisi boys ko training ki jarurat nahi pda karegi
Good demostration boss keep on giving us knowledge
Interesting I love it ... Simple way of marking without any confusion ..
Tell me how to mark the 1st point
great job..............
Thank you sir
Very much informative video, great job, well done
It is a great video..very helpful...:)
ek questions bhi hai sir ki.. aapne columns ki marking de di or peg bhi laga di, par jab excavation hoga tab ye peg to hat jayenge....to fir hum measure karenge wo bhi bina koi marking ke...??
The decision of base point reference with respect to the site needs to be explained how it is decided? What can we do if we need to use JCB to dig a foundation ?
You may use Total Station for demarcation
Ooll
Thank u sir bahut hi intresting video hai once again thank you
Thx a lot for such a simple way of explanation
This is useful for the people who doesn`t have basic knowledge
very helpful! thanks for sharing.
You nailed this. Very lucid!
Are the column footing part of earthwork in preparing BOQ?
Good job my brother...this help me a lot
really very useful video for freshers sir. thank you so much sir. please update more civil engineering related videos. all the best for hardwork
good and clear explanation thank u very much
Marking column is required before excavation... Otherwise it difficult to find the center of column...
It is the best dude keep adding more
Thanks for showing us. ✌
u guys are amazing..very clear
Very nice sar
Excuse me Sir, I stil wonder, what is the white powder to use and drop on the square iron on the ground sir ? thank you.
it is more useful sir ...i need more construction videos
how the base point was taken as the plot was clear and area which was to be built was not mentioned or according to drawing.i think the surveyor is to find out base point? me right or not?
Really awesome sir..loved it
very good post. with clear details. thanks
The video is very helpful and understanding easily. Tnx sir
Thanks
Ys
slam sir i am very thank ful to u it is very help ful lecture
amazing sir ,I want more
Whts th footing size , is it 3*3 ft aa
Great explain , nice working
Informative video thanks a lot sir
Thanks
Tell me how to acurace 10×100 ( cricket pitch ) area ...perfect shape ..help me
this video is very useful it's developed my skills important
bro your mark of all points using peg.....then after how to you find the center point of a specific column...I mean how to draw four sides of column boundary line by using powder.......
Should we add wall thickness to it ???
sir is it necessary to use 3-4th rule for straightness?? we can directly place rope r tape right na??
nice work boss
Very useful
ALL-ROUNDER CIVIL ENGINEERS nn
Nice post with clear detail.....
thnks mohan sir make more vdos
I watching your videos 2024 very helpful video
AFTER excavation WILL BE PROBLEM U MUST PUT GRID LINE 1-3 MTS FROM BUILDING OFFSET
Thank u very Much..This video is very helpful for me
sir, how did you know where to mark the first two points on the ground //
You can easily get that info from your mother where she wants the building.LOL
It's really nice. 💖
Yes
How do you know as that is the cener of
I really appreciate your effort to make this informative video. It's very useful. All the best.
please sir upload video reading of site drawing details which is important to civil engineer
Sir can u say the dimensions of footings as per is codal provisions and also the dimensions of ur pattern used for marking
Very useful method sir more videos upload sir
I benefitted a lot from this video
Mohan please suggest me how to fill empty columb after lenter......
hi sir thanks for the video but the points which u have taken are always constant or it depends on the plan
After excavation how can you take refferance from which point before excavation your peg will be removed then after excavation how can you take refferance where you marked before upload such video check carefully got it my point
How did you. Know Mark in first to points in the ground
really amazing to create accurate 90 degree on field/ site....thanks for us......
chandrakant gunjkar
gopal barhate
vijay surse
upload more marking video sir pls
Upload more vdos
sir, how did you know where to mark the first two points on the ground ?
I think that the base line is the outer wall boundary.
Saurabh Bhayaje
Saurabh Bhayaje ghehghsgggsgg
💐☺👌👌!5$trgefefgftegrwgTeiwwwwheggwyggegggeyy nl nl nl bl kl jl kl jl jl jl we IV duty
First of all we need a Centerline drawing and a set-out drawing. Set-out drawing which shows the site plan and setback of the building , with that drawing we get the base line of the building after tieing those base lines we use centre line drawing to tie all the inner wall.
@@tojobcom it's centre line of column not outer wall boundary
Good job Mohan sir nd Venkatraman sir
Good video ..thanks for sharing ..
Sir how u make points between them distances like 10' dustance like inter section points can u explain briefly
Center to center distance of column
ruclips.net/video/6oqJNq1m-6M/видео.html
Jammbykg
Watch here
Nice work, But if you showed the plan in this video as well, it would be more effective
Sir your video is very nice and your attempt is wonderful...i have a small doubt in the foundation marking technique where i find lack of endeavor in bringing the peg at the center of the square...is it not necessary??
Thanks
Sir what the foundation marking steel size any body known's plse..
Can i use Autocad to locate the points ??
what is the size of the square markings marked with chalk power it is 3 feet X 3 feet or 4 feet X 4 feet ? I am using your video to measure lengths using computer program. Your information will be helpful to me.
Agar pile kajer khobor nai
you are great sir 👏
nice video sir, thank u.
Good information sir tnk u so much
upload more videos for all step by step to for a construction
How can we decide the first two points are straight to each other.
Sir. How to establish a base point. Which u did at the beginning of video. Plz help
add more marking sir pliz
it is helping us to understand layout marking pliz add more video
ajinkya mahajan hï
Sir I have one doubt, piling or foundation which is best for building construction?
bimlesh kumar dear foundation depend on soil straingh so. Cheak soil bearing test.and choose on soil bearing
Very useful method bro..
why you put 3or 4 times put in steel
Hello sir this is Pawan.
I have a doubt.when to apply square footing and when to apply rectangle footing.? Waiting for your reply sir
Thank you
Thank you sir it's very easy.
Looks great
Good idea ser the best
is it the centre point of column or out of boundary point???ur dig mark is out of boundary
Marking is not parallel to the road. It's essential to maintain foundation line parallel to the road duly maintaining the prescribed offset using 3-4-5rule.
Thank you so much, Sir
Now I feel like an architect.
Thanks bro. We can understand You put more effort to make this video.
we need more details information in footing marking and column marking
sir plz learn us how to locate site area from drawing.
WHAT IS SIZE OF RING TAKEN BY YOU FOR MARKING ? SIR
4ft×4ft
Thank you it helps me how to get the right angle for my house. I salute you for this effort.
that must be given in the design, I guess
@@ahmarkhan9604 plaz Urdu taking
Sir, we have a big water well beside our empty plot in village. Well is constructed with rocks. Now, we want build a house (G+1 (only 1 room in 1st floor )) .how much is the safe distance between well and house?