I love it when they come back in to pick up their marker and they say "I didn't take it apart", usually because mom is standing over top of them, arms crossed, glaring down.
Quick question...if the typical reg pressure shouldn't exceed 200psi, how can a player determine if they aren't exceeding 200 if they decide to clean the reg. Thanks!
Hey! So very new here 😅 what kinda magnet did you use to remove the plate? I'm unable to do it with the ones I currently have and that plate is in there pretty good
Hey ANS! I have a 2.0 and whenever I apply air on the asa it almost always pops out a ball down the barrel… not full velocity just kinda pops out like 10 feet. Any ideas?
I was always taught if you take something apart, whether it's to clean it put something new in there whatever you're doing you put it back together and it's not working, you go back through and make sure everything is the way it should be. I mean come on how hard is it to look at a diagram. I mean seriously before you take it into get looked at, you're not going to go over everything and make sure it's dead on right
To me, this seems like a design flaw....there is enough room to the edges that they can make the plate bigger so it does not fit perfectly in the bottom part (and people would realize it does not "fit" in that spot) and it still fits at the top of the spring with the cone in the middle and the (larger) surface extends slightly over the diameter/width of the spring. Oh well, Empire makes it confusing for no real reason. Yes, still user error by the owner but why even make that a potential problem?
I totally understand your point of view and can agree but also from a production standpoint they can take the same piece of metal and Mill out the centerpiece of where the spring sets and use the extra scrap piece to be stamped for the regulator pressure setter plate, thereby using less material to manufacture a product and saving money
@@noOnesafe007 Yes, you can also just remove the tournament lock. I also installed a hyper deuce trigger (the hyper-deuce trigger trigger description for the empire axe model lineup was not fully updated when I looked, said it was only for axe 1.0, but it still fits perfectly, same size). This trigger is legit so f@$%ing light on the 2.0. Almost too/dangerously light with no adjustments, it could almost go off by shaking it hard enough back and forth rapidly enough. But yeah. With adjustments its crazy light and pretty cool to use on it.
@@benjaminjester257 so its a trigger that causes it to shoot like that. Where can I buy the trigger and can I use it in tournaments and playing in fields
Hey I have a question hope you’ll can help me or ansgear can I have an axe 2.0 that I just bought like 4 months ago and now that I turn on the gun there is a orange blinking light idk what do that is no air lickings just that hope you guys can help
I dunno 100% but I'm pretty sure yes, the only things that maybe different and need swapped are the air transfer tubes. The axe tubes might be longer as the grip might be longer. Could be lucky though and it's all the same
i actually ordered an item at ansgear, they accepted my order and then cancelled it just for a simple address that didnt match, now they are telling me that they didnt get the money but i actually lost the money, i was unable to have my refund, then their customer service is telling me that im on my own now.
I own a gtek (og) and an axe. I honestly think it comes down to cosmetics, ergos and whether or not you prefer the shot of one to the other. They both check all the performance boxes, the rest just comes down to personal preference imo.
These videos are great tutorials! Keep the series going.
I love it when they come back in to pick up their marker and they say "I didn't take it apart", usually because mom is standing over top of them, arms crossed, glaring down.
Awesome video please keep making them.
Quick question...if the typical reg pressure shouldn't exceed 200psi, how can a player determine if they aren't exceeding 200 if they decide to clean the reg. Thanks!
For the best assistance call in at (805)522-8700 & we would be glad to answer all your questions for you.
Is that the black on black or black on grey
paying attention to detail is probably the biggest thing with hands on repair and maintenance
Hey! So very new here 😅 what kinda magnet did you use to remove the plate? I'm unable to do it with the ones I currently have and that plate is in there pretty good
Guess people don't read the manual anymore
or look up a simple video on how to assemble a marker
Hey ANS! I have a 2.0 and whenever I apply air on the asa it almost always pops out a ball down the barrel… not full velocity just kinda pops out like 10 feet. Any ideas?
What do you think about tippmann xr1 Stryker
I was always taught if you take something apart, whether it's to clean it put something new in there whatever you're doing you put it back together and it's not working, you go back through and make sure everything is the way it should be. I mean come on how hard is it to look at a diagram. I mean seriously before you take it into get looked at, you're not going to go over everything and make sure it's dead on right
What barrel did he use?
To me, this seems like a design flaw....there is enough room to the edges that they can make the plate bigger so it does not fit perfectly in the bottom part (and people would realize it does not "fit" in that spot) and it still fits at the top of the spring with the cone in the middle and the (larger) surface extends slightly over the diameter/width of the spring. Oh well, Empire makes it confusing for no real reason. Yes, still user error by the owner but why even make that a potential problem?
or read the manual
I totally understand your point of view and can agree but also from a production standpoint they can take the same piece of metal and Mill out the centerpiece of where the spring sets and use the extra scrap piece to be stamped for the regulator pressure setter plate, thereby using less material to manufacture a product and saving money
Which also makes the marker cheaper for you and I to purcase!
Can someone tell me what firing mode was it on cuz it shot so fast
Prolly just semi uncapped. The mini and axe trigger can be super bouncy
@@jptflo714 is there a way to set it to that
@@noOnesafe007 Yes, you can also just remove the tournament lock. I also installed a hyper deuce trigger (the hyper-deuce trigger trigger description for the empire axe model lineup was not fully updated when I looked, said it was only for axe 1.0, but it still fits perfectly, same size). This trigger is legit so f@$%ing light on the 2.0. Almost too/dangerously light with no adjustments, it could almost go off by shaking it hard enough back and forth rapidly enough. But yeah. With adjustments its crazy light and pretty cool to use on it.
@@benjaminjester257 so its a trigger that causes it to shoot like that. Where can I buy the trigger and can I use it in tournaments and playing in fields
@@noOnesafe007 no, the trigger in the video is the original trigger that comes with the gun. It is also nice.
Hey I have a question hope you’ll can help me or ansgear can I have an axe 2.0 that I just bought like 4 months ago and now that I turn on the gun there is a orange blinking light idk what do that is no air lickings just that hope you guys can help
If you have any questions or need help with an order feel free to give us a call at 805-522-8700
what kind of magnet did you use?
A magnet.
Can a mini Gs ASA be put on the axe 2.0?
I dunno 100% but I'm pretty sure yes, the only things that maybe different and need swapped are the air transfer tubes. The axe tubes might be longer as the grip might be longer. Could be lucky though and it's all the same
I am having a problem with my marker I am unable to walk the trigger on mine
Are you loosing velocity the faster you shoot?
@@khalistan6544 no I think it might just be the trigger or sum
My gun keep flashing a red light and it don’t let me turn off the gun why is that ?
Try a new, name brand battery?
common Fail
i work in a Paintballpark and see this moste of the time when a Axe is not Working
or the Cap is slightly unscrewed or so
Bro watched this video in aw
Ansgear is not answering my emails! My order has been delayed since oct 2020..
If you have any questions or need any help with your order feel free to give us a call at 805-522-8700
i actually ordered an item at ansgear, they accepted my order and then cancelled it just for a simple address that didnt match, now they are telling me that they didnt get the money but i actually lost the money, i was unable to have my refund, then their customer service is telling me that im on my own now.
why was he subtracting 20 psi?
Reballs shoot ~20psi faster
He's not, it's "feet per second". Because reball shoots "20 fps" faster
Just gunna say everyone is thinking it if you got a axe 2.0 for a tournament gun you fucked up get an planet eclipse marker
Axe 2.0's are perfectly good tournament guns
@@OSKOcolot not really 😂 they will be good for 1 season then something bad happens too them
I own a gtek (og) and an axe. I honestly think it comes down to cosmetics, ergos and whether or not you prefer the shot of one to the other.
They both check all the performance boxes, the rest just comes down to personal preference imo.
Why would everyone be thinking this? It's not even relevant to the video. This was a case of user error.
are you braindead? the customer literally put the gun back together wrong... it wasn't any fault of the axe...