Hoover H-Free 200 Cordless Vacuum - Trashed by a small surface mounted component
HTML-код
- Опубликовано: 9 сен 2024
- I acquired this awful thing the other day, unfixable as usual! Let's have a look and see if we can spot what the issue is!
Fancy donating to the channel? I’m always in need of parts for projects, so have a look at my Amazon wishlist, and let me know who you are in the note so I can read it out on camera! - www.amazon.co....
Please check out my Instagram - @TheRealBeko1987
Please check out my blog of Vacuum Cleaner brochures and Manuals - oldhoovers.blo...
Please do like this video if you liked it, or dislike if you felt it was lacking a certain something, and please subscribe if you would like to be notified when I upload more vacuum cleaner content!
thanks a lot i was so happy to find this, despite you didnt fix it you inspired with a lot of ideas. What i found is two pieces i had exact same problem. Resistor replaced, but it smoked immediately again, i found the LDO 7533 - marked as U60 on PCB is short and mosfet too, replaced these as well and all good. thanks. hope this helps.
Mine is doing exactly the same. Sounds like a trip to the tip is in order.
My HF222MFP has a shot motor, but while I'm taking it apart R60 is a 201 SMD resistor (200 Ω) if it helps anyone. 🤓
Hi! What was the size of this 201 SMD resistor, 0805, 1206..??
@@silikon21 I did not measure it at the time, measuring it with an onscreen ruler at 10:17 it comes out at roughly 1.5x1cm if that helps
Mine has a burnt out trace. Can you measure where on the circuit goes the outside part of the smd resistor
@@silikon21 Would love to help but mine was e-waste as I could not replace the motor.
Great video Sam , shame you couldn’t fix it .
Shows you get what you pay for and these cheaply made machine have cheaply made pcbs in them .
Looks like the dirt buildup over that PCB may have caused an electrical arc or short, especially seeing as thats the usual method the PCB on the old Autosave Henries blow, by the carbon dust deposits from the exhaust air that pass over it. Poor design allowing such a large amount of dust through the motor, as there doesnt seem to be any kind of pre-motor filter on these, and they rely on the exhaust filters to clean the air. Also means the fans will get coated in dust and become noisy and out of balance. Crap machines, and the Vax equivalents from that era are just as bad. If you are going to get a cordless, get one with a pre-motor filter, which is most Sharks and all Dysons.
I have this model, only used it upstairs,it was working fine, then all of a sudden started to make a screaming sound very noisy, I changed the filter, no different. It’s going in the bin, not got time or the inclination to strip the thing down. I will never buy hoover make again, waste of money!
Came across your vid looking for some guide to take apart an H-100. Pulled it from the dumpster, checked it out a bit and saw that it was totally clogged with pet hairs (wouldn't be the first time I find a perfectly working Vax, thrown away only because folks are to lazy to clean it). After a thorough disassembly/cleaning of the head and wand I noticed that the motor made an odd sound and vibrated. So took it all apart and, gosh, the rotor snail was totally clogged up with hairs & dust. A wonder it still worked. But oddly, the housing and the PCB had only some very minor dust on it.
Exact same problem I've got with mine. I wasn't sure if it was the chip, or if it was the voltage regulator, as the chip feels cool to the touch, but the 3.3v voltage regulator IC (marked 7533) feels seriously hot when powered. Sadly main chip is unmarked, so looks like a bin hobby unfortunately. What a waste.
Thanks i followed your step by step guide to open mine. Would you be able to solder over the chip somehow or it won't make a difference?
I've got one of these the power keeps turning off after a few seconds
thees codlles hoovers have a rep u tion of bloing tere moters because of no cyclones and no pree filter
Sound like mine, the whole interior was full of thick dust. Evidently the seals are not much use at keeping smaller particles out of the inner workings. Trying to source a motor but it's looking a lot like e-waste now.
What water did you use to clean the motherboard?
Wasn't water, was electrical contact cleaner! Washing motherboards and other circuitry is a whole other level that I've not gone near lol!
@@beko1987 alright thank you lol looks good to use
L'ho smontato. Sulla schedina elettronica, ancora pulita e senza polvere, noto un componente decisamente bruciato, R60 e forse anche D61 e C60.
Esattamente come compare nel video di Bekoa987!
Che si può fare?
Ovviamente senza portarlo in assistenza!
If you can find the components and can get them fitted it's possibly easy and cheap. Otherwise any used heads on ebay cheaply? Always some on UK ebay
Ne sconsiglio vivamente l'acquisto. Pessimo prodotto. Il contenitore della polvere si sgancia con le vibrazioni, è diventata rumorosissima e il coperchio non è a tenuta e rilascia la polvere aspirata.
Stessa esperienza. Vorrei provare ad aprirla per risolvere la rumorosità
@@piergiutube L'ho smontato. Sulla schedina elettronica, ancora pulita e senza polvere, noto un componente decisamente bruciato, R60 e forse anche D61 e C60.
Esattamente come compare nel video di Bekoa987!
Che si può fare?
Ovviamente senza portarlo in assistenza!
@@donato4809 io l'ho smontato ma solo per la rumorosità, infatti il motore era ostacolato da capelli e polvere. Se hai trovato dei componenti bruciati sei a metà dell'opera, ti conviene portare la scheda da un esperto di elettronica altrimenti rischi di bruciare tutto se non sei avvezzo. Secondo me con 20 euro al massimo te la cavi, va anche meno.
@@piergiutube grazie, seguirò il tuo consiglio.
I have one hfree trashed After 3 years cause of the bad design. The electric brush has a very tiny cable that turns around the rotation block, and it was cut by the movements ... additionally the button to keep it working without pushing anytime is broken . Bad bad designed product, a real Chinese trash one
Terrible hoovers, even from new the suction was pitiful, now none at all, a total waste of money,.