I love your videos so much man. You make me laugh and inspire me to make mower builds like you! I actually have a mud mower work in progress because of you! Thank you for creating these funny and inspiring RUclips Videos! Keep it up!!! ❤
just need a new carb for a bit more power, and maybe an internal gov delete. A proper chain guide should help too, keep the vibrations down and keep it from throwing the chain or link. could have vibrated the master link loose, causing it to fall off.
Those tecumseh flatheads have loads of torque for their size. Just keep the oil full and try not to over rev it much. They have glass con rods and don't like being over revved
Btw the reason why it was bogging is that those techumsea engines carbs are trash and cause them to bog, you should put a mikuni .22 carb and it should stop your bogging issue
Wait it says on the side it used to have a 15.5 ho engine and he put a 10 hp engine I’m no engineer but did the other engine not run at high rpm’s and if it ran the same it seems more powerful
@@MisterdionneYT I got a couple that ive got but their not worth fixing. I need to find a good horizontal shaft engine for it, trying to make it chain drivin
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
That style of intake will directly take a pz27 dirt bike carb
The rotation of the wheels matching the camera shutter at 9:12 was mind bending for a second
best lawnmower creator out here
Keep these videos coming man. You're inspiring me.
I did not consider "Small Gas Engine Brainfood" to be a genre of youtube niche, but here we are my friend!
One thing I would love too see you build is a 4wd lawnmower
i will do it for sure !
i love your vids dude
I love your videos so much man. You make me laugh and inspire me to make mower builds like you! I actually have a mud mower work in progress because of you! Thank you for creating these funny and inspiring RUclips Videos! Keep it up!!! ❤
thank you ! will do
@@MisterdionneYT Your the best Man. Love your content. ❤️
You've become one of my favourite youtubers btw....just a bloke with he's camera doing random projects like old youtube
got the same engine in my sears suburban ss16 these are tough engines been riding it for 3 years without a governor and it is still going strong 😁😁
just need a new carb for a bit more power, and maybe an internal gov delete. A proper chain guide should help too, keep the vibrations down and keep it from throwing the chain or link. could have vibrated the master link loose, causing it to fall off.
Did you put the master link on backwards?
I know the problem it aint got no gas in it 😂
I started my first mower project because of you
It is so hard to start because you dony have a choke on it and you didnt prime it
i want to see more videos with the snowmobile engine in the mower i watched it 5 times because i loved it
you will get more
I love your videos they always make my day
Hi there, looking to get into welding do you recommend any brands?
Miller wire feed super simple to use and extremely reliable
i love how you use a piston as the shifter
switch from chain to drive shaft?
Love you man
When are you going to do another Honda lawn mower video
You should make a four-wheel drive lawn mower for off-roading
the first part of the video best part
Papire le tank,continu à faire du contenu et longue vie au tracteur à pelouse 👍👌
It's as if the riding lawn mower is built to have the power to drive through grass and cut it.6:20
awsome video:)
yes finally a new video
nice video! your videos are always so funny!
Those tecumseh flatheads have loads of torque for their size. Just keep the oil full and try not to over rev it much. They have glass con rods and don't like being over revved
That Tecumseh engine is one of the best engines you can get it has infinite torque
YOU ARE NOT DEAD LET'S GO
Helle nah😂😂 Oh nooooo
Btw the reason why it was bogging is that those techumsea engines carbs are trash and cause them to bog, you should put a mikuni .22 carb and it should stop your bogging issue
holy jesus man get yourself a new angle grinder disk, that thang more sketchy than some of these rides you make :D
it'll be fine haha
@@MisterdionneYT till it flys apart at 10.000 rpm an rips half your cheek off
I had one break when it was too small and it shot shrapnel into my safety glasses
0:38 next time use the electric starter man
hahaha !
On that s.b. engine you need to remove the plates off the cylinder for cooling for summer use.
I really hate ticks!!!! Are you in the states?
fire in the hole
So cool
Turn the fuel screw all the way in then back it out 2 and a half turns ...that 10hp motor should start much easier than that
Haven't even watched, already liked 😂
your the best !
Yes sirrrrr
Love you
Wait it says on the side it used to have a 15.5 ho engine and he put a 10 hp engine I’m no engineer but did the other engine not run at high rpm’s and if it ran the same it seems more powerful
@@Randomlyvidguy96 the engine was blown ! but this was just a test
@@MisterdionneYT that makes sense
Grinding the crank shaft is horrible
Why
Im doing the same thing with my 71 trike swapped John Deere. I'm just looking for a good engine for it that's cheap.
i often find free mowers with engines in it ! just look around your town and youll find plenttly buddy
@@MisterdionneYT I got a couple that ive got but their not worth fixing. I need to find a good horizontal shaft engine for it, trying to make it chain drivin
Why are you switching gears with a piston 😂
Make it 4wd!🤠
Put a push mower engine on one lol
Build a golf cart 🙏
😂😂
Post more often 😢
you need to get like a 250 or 450 motor
He has a Polaris 800 on one
hehe!!
@@MisterdionneYT it was either gonna be me or you who told em and i beat you too it cuz I got your back bro
Make it 4wd
Put a turbo
noo i liked the old profile picture
@@sweludde9593 haha ! sorry this one cleaner haha
2min
First comment pls pin me I love your videos
first
second