I Put a CB Radio In My Car!

Поделиться
HTML-код
  • Опубликовано: 15 окт 2024
  • Back to good old CB!
    Please check out my Wish list and anything you may send me will leave me eternally grateful ;)
    Rusty's Amazon Wish List: amzn.eu/3TJm7Rf
    RustySkull Productions Official Twitter!
    / rustyskullmedia
    Check out my other channel Haggard RC!!
    You can help me make better content by donating Via PayPal as a gift to RustySkullProductions@hotmail.com!
    Or you can use this link: paypal.me/Rust...
    Every penny that is donated will go into making good quality videos for all my loyal subscribers!
    Many thanks to you all :)
    Uploads are usually on Monday, Wednesday and Friday. Saturday and Sunday uploads are only if I have extra footage on the weekends.
    Uploads on weekdays are 03:00 GMT/BST.
    #CBRadio #Thunderpole #Sirio

Комментарии • 35

  • @indianatone218
    @indianatone218 Месяц назад

    thanks for showing how you set up in your motor ,just getting back into CB radio dusted mine off after 25 years got all the bits just making a platform to put it on in my focus , will be showing how i made it on my channel bit later quite an ingenious adaption of the lid box on top of dash hope it starts getting popular again ,take care buddy over n out lol oh ! greetings from wales have liked n subd you .

  • @peggie2999
    @peggie2999 2 года назад +3

    Full power 50W setting on the FT1900 with M6 Foundation license. Don't worry, we won't tell anyone. 😊

    • @fazejohncenachristogamerfaze
      @fazejohncenachristogamerfaze Год назад

      lmao

    • @RSPYT
      @RSPYT  Год назад

      Haha yeah, I still have that radio, it’s a pain because it only work on full power, still draws like 10 amps but puts out about 8 watts so it’s been a while since I used it to be fair lol. I did get it mended though the power cable was damaged causing it to put out low power on all settings. I think it went wrong again though, can’t remember exactly but perhaps I’ll get it out and use it again. I did enjoy that radio.

  • @mark2035
    @mark2035 Год назад +1

    Nice one Ben. Look forward to new radio videos. ATB mate.

  • @ERICtheLATE
    @ERICtheLATE 2 года назад +3

    Cool setup, Rube Goldberg and Frankenstein style, yet all solid state.
    Is there a way to patch in the battery to the charge system, or do you charge it elsewhere, hook it up, and run it down till the next charge? I did that for a base station power supply, and it was a lil work but lasted at least a week above 11 volts, and made the recieve so quiet, by not being tapped in to the world of conduit.

    • @RSPYT
      @RSPYT  2 года назад +2

      I could wire it up and make it charge but I don’t keep the radio in the car for long usually so I take it out when I’m finished with it and charge it up at home, then put it away until the next time. :)

    • @unitedstatesirie7431
      @unitedstatesirie7431 Год назад

      the new surface board mounted digital ANYTONE brand of CB has AM, FM, SSB and WX weather channel. It is always important to have an older solid state CB radio such as a COBRA 148GTL as a backup, because the new surface mounted digital designed CB radios can be destroyed by an EMP.

  • @EternalRUSHfan63
    @EternalRUSHfan63 17 дней назад

    😂😂 good vid !!!

  • @glenn5151
    @glenn5151 2 года назад

    Nice to see a bit of cb radio.
    I thought that pat might of been on.

  • @steveedwards4495
    @steveedwards4495 7 месяцев назад

    When did the call channel change to 19? That was always the trucker channel? Was always channel 14? 1 4 for copy?

  • @adrianvining7431
    @adrianvining7431 Год назад +1

    Hi l just stumbled across your video today l am thinking of getting a mobile set up what antenna would you recommend?

    • @RSPYT
      @RSPYT  Год назад +1

      I recommend a Sirio 3000,4000
      Or 5000

  • @adamivanecky3907
    @adamivanecky3907 2 года назад

    the type of 27mhz ssb cb are with am/usb/lsb

  • @chucky2316
    @chucky2316 2 года назад +1

    I had mine hard wired in my mazda2 but I've got a 14 plate mondeo so I don't want to mess up my car

    • @RSPYT
      @RSPYT  2 года назад

      Won’t mess it up if it’s done properly lol

    • @chucky2316
      @chucky2316 2 года назад

      @@RSPYT the thought of taking a hacksaw or drill to my mondeo fillsme with dread, I had a delta slim in the mazda tiny cb Ben

    • @RSPYT
      @RSPYT  2 года назад

      Why would you need to drill or cut anything? People who do that are silly lol

    • @Bones-912L
      @Bones-912L 2 года назад +1

      Try a president Bill mine fits in compartment between front seats in a freelander out of sight as well and lid shuts

  • @Bones-912L
    @Bones-912L 2 года назад

    When i have mine plugged into cig lighter I get a lot of interference waiting till I've some spare dosh then better one hard wired to battery should sort it

    • @RSPYT
      @RSPYT  2 года назад

      I made a video this morning talking about that issue… some cars do it and some don’t 😂

    • @Bones-912L
      @Bones-912L 2 года назад

      @@RSPYT must be my knackered old td4 lol

    • @Bones-912L
      @Bones-912L Год назад

      Got a new set ss6900 wired it to fuse box couldn't get it to battery but so far so good

  • @del-boysnostalgiatvads7416
    @del-boysnostalgiatvads7416 2 года назад +3

    I have a cbbc radio in my Vauxhall Astra to there great my user name is hollow legs

  • @AM-zt3xe
    @AM-zt3xe 2 года назад

    Will the areil wire be ok trapped in the door and would it not make water leak in your car how would u wire the antenna wire in more permanent?

    • @recall2880
      @recall2880 Год назад

      Yes it would be fine and no it won’t leak. Did it many times in the 90s. Without drilling holes in the car there isn’t a permanent way

    • @rosscopeeco69
      @rosscopeeco69 Год назад

      Yes it will cause water ingress. Even if minimal, water will channel down the wire and through the gap created in the rubber. That is not to say that X amount of people won't have water come in but in my experience of your going to fit an antenna best do it correctly as wires hanging off the roof look naff.
      There is a permanent way. To mount it into the roof you'd use a 3/8" SO239 adapter / mount. Essentially drill through, treat with anti rust paint and a plastic washer to prevent leaks etc. Or use a 3/8" side pillar mount which you'll get from thunderpole or Amazon. You can then track the coaxial down the roof lining/ pillars and make a neat hidden job of it.

    • @recall2880
      @recall2880 Год назад

      @@rosscopeeco69 Way OCD. It will be fine

  • @spooktasticaparanormal
    @spooktasticaparanormal 2 года назад

    Nice video Ben, Keep up the great work bro. Kind regards. Paul.

  • @jameely
    @jameely Год назад

    When not in use should I remove it

    • @Normie-c7s
      @Normie-c7s 9 месяцев назад

      Why wouldn't you just use it

  • @Andrew-bl2vo
    @Andrew-bl2vo Год назад

    That a " burner" I see under the swr meter

  • @FransTheGamer23
    @FransTheGamer23 Год назад

    hey i m a subscriber,i see you didt do cb or radio video for the last 7 months or so :(

    • @RSPYT
      @RSPYT  Год назад +1

      Yeah I have dude I did one bout 3 weeks ago

    • @FransTheGamer23
      @FransTheGamer23 Год назад

      @@RSPYT yeah 4 weeks the one with the cb for in the car i just ment to say,i subscribe for the cb videos hahaha