Flow factor, working width, disc type and application rate in the control box and drop point setting on the lever on the side of the machine(blue button) and adjust your telimat for boundary spreading and away you go. Drop point is doing the same as the old adjustable vanes. Someone already said about plugging in the 7 pin in cab to get forward speed so she adapts, faster you go the more she opens up. But you will need to do a 100m calibration first to set it to your tractor👍
You will need to get a speed reading to work the variable rate on the spreader. You can get it if the tractor has a 7 pin plug, or by fitting a speed sensor on the 4wd shaft of the tractor or from a GPS system.
Inside settings determine tge with width r12.5 for 24 m. It just determines where the fert comes out on the disk. Outside one sets quantities 82 for 1 bag at 14k approx. Ranch app is handy enough and fairly accurate. Obviously those settings depend on density of fert
The CVT is coming along nicely :) I guess that CS150 has spent some time with dual wheels on it, looking at the rear rims with the lip :) Is it coming from Holland/Belgium?
Love this guy straight up talk no B's I think he's brillant should do more videos pure natural mrcvx top man
Great job on the tractor it takes serious time and effort to do it to that standard, its a labour of love but iam sure it will be worth it in the end.
Flow factor, working width, disc type and application rate in the control box and drop point setting on the lever on the side of the machine(blue button) and adjust your telimat for boundary spreading and away you go. Drop point is doing the same as the old adjustable vanes. Someone already said about plugging in the 7 pin in cab to get forward speed so she adapts, faster you go the more she opens up. But you will need to do a 100m calibration first to set it to your tractor👍
The rally seat is a nice touch in the office. Well wear.
That office is some job if the missus tell u get out you can always move in there 😂😂😂😂😂
The settings on side of the Rauch Axis are for changing the drop point. To adjust the spread width with different fertiliser types
Fantastic idea for painting the rims.
S4 discs will spread any width from 18m to 28m. That's what I use on my Axis
You will need to get a speed reading to work the variable rate on the spreader. You can get it if the tractor has a 7 pin plug, or by fitting a speed sensor on the 4wd shaft of the tractor or from a GPS system.
Tractors have that
Inside settings determine tge with width r12.5 for 24 m. It just determines where the fert comes out on the disk. Outside one sets quantities 82 for 1 bag at 14k approx. Ranch app is handy enough and fairly accurate. Obviously those settings depend on density of fert
Thank you
The cs150 looks tidy👌👍
Also mate, what control box do you have and i could email you a pdf copy of the ops book if you like 👍
Would you know where I could get side skirts for a Steyr 9094 👍
Office/Bar would have been handy during lockdown 😁😁
The CVT is coming along nicely :) I guess that CS150 has spent some time with dual wheels on it, looking at the rear rims with the lip :) Is it coming from Holland/Belgium?
Came from France
Would you source a particular tractor for a customer?
How do you strip the axle and tricky things for paint persume you don’t sandblast them ,
Sand them by hand
Credit to you will be a super job when completed
Nice office
When will the invitations be out and is it bottles or draft
You're a vip
I think the suspension light on the dash stays one the whole time for the active front suspension as she can move up and down on a switch in the cab
I’ll take the A frame off the front mower please
What year is the cs
👏👏🙏🙏👍👍🇮🇪🇮🇪
any VICON 74006 for sale