Clean Me Light is Solid - Now What! | Breville Barista Express
HTML-код
- Опубликовано: 22 авг 2024
- Amazon link:
As an Amazon Associate I earn from qualifying purchases.
Descaler (2 Uses Per Bottle) - amzn.to/2QaZcN0
Water Filter - amzn.to/2KGiMgI
How To:
1. Check if the ‘CLEAN / DESCALE’ light is illuminated (solid on), descaling is required.
Add Descaling Solution to water tank (Follow cleaning instruction)
2. Press and hold the 2-CUP button and then press and hold the POWER button simultaneously to enter the Descale mode.
The unit will heat up as part of commencing the descaling action, during the heating processes the POWER button should flash continuously. The machine will indicate it is ready for descaling when the POWER button, 1 CUP button, CLEAN/DESCALE indicator and HOT WATER/ STEAM indicator are all illuminated (solid on).
Descaling the coffee component
4. Press the 1-CUP button to start the descaling for the coffee component of the machine. Descaling coffee component
takes approximately 25 seconds. The 1CUP button should flash continuously and remain constant once the descaling process has finished. To terminate the descaling within 25 seconds, press the 1 CUP button again.
Descale the Steam and hot water components
Descaling steam and hot water takes approximately 13 seconds and 8 seconds respectively. Descaling can be terminated prematurely by turning the steam dial to STANDBY.
5. Descale Steam component by turning the steam dial RIGHT towards the icon.
6. Descale Hot water component by turning the steam dial to the LEFT towards the icon.
Repeat processes to complete descaling
After the above processes about half (17 fl. Oz / 0.5L) of the descale solution should be left in the water tank.
7. Repeat steps 4-6 above to complete the descaling process to empty the solution in the tank.
Descaling Solution Rinse
8. After descaling, remove the water tank and rinse thoroughly then refill with fresh cold water to the maximum capacity (68 fl. oz / 2L) and repeat steps 4-6 to further cleanse the machine of any residue of the cleaning solution thoroughly.
9. Press ‘POWER’ to quit the descaling process. This will be indicated by the LED lights switching off.
I have to watch this every time the light goes on. Thank you
Same! 😂
Same
Me too. I've been coming religiously
Same, three years and counting..
Sameee
I come back to this video every couple of months to use!
Me too!!!
I always return to your videos everyone I clean and I have owned mine more than 4 years!
Thank you so much for making this video. So much more helpful than the instructions provided in the manual.
Best cleaning / descaling video ever! Good to see ya every few months 😊
Clear instructions and demonstration that are easy to follow, and such warm, welcoming presenting too! Very much appreciate your efforts - hope you are well. :)
Thanks so much it worked and the light is off. Great video
I did my Descale on a Sunday as well. Cheers
Thank you. I used the cleaning tablet, but the light was still on. This video helped me figure out that I also had to descale.
Your videos are so, so helpful. When I need to learn something for my machine I always make sure to find your video on it because they're the best! Thank you for doing these.
Lost my manual that tells me I used to always go back to that, thanks for the video hoon
Minor note: if your machine hasn't warmed up yet, the "Hot Water" and Single Shot light won't immediately turn on like it shows in the video. If you followed the video, you did it right, you simply need to wait a few seconds for the machine to warm up and for those lights to turn on.
Hoon, you don't get the credit you deserve. Thank you.
Thank you Sir! Worked perfectly. I bought the same descaler as yours per your recommendation!🎉
I thought the thermocoil was copper at one point and I think that's why they don't recommend vinegar, but don't quote me on that.
I am pretty sure I did all those steps and still my light is steady on. Any specific suggestions anyone? Good video by the way!
I went through the full descaling process, turned off the machine, but the clean me light is still on. Do I need to descale again? Or is there a way to reset the clean me light?
Mans a dang hero
Huge thank you! Great video
muy buen video saludos desde Cancún México gracias por los consejos
Thank you, super easy to follow, worked a treat!
It works for me😊. Thank you for the tips!
Solid clean Light came on , did the same the same cleaning cycle with the same descale solution, when I was done turned it off and back on and the light still solid on 😢! What am I missing ? Thank you for the video
Back for the 15th time
Once again coming here tonfollow the process hahaha thabks
I have that same solution!
Hi my friend thanks for everything
Thanks for the visit
I’m in Scotland, the water here is very soft so never get any limescale, do I still need to descale it, can I stop the blinking light?
Hi Ross: the blinking light just means cleaning, just use the cleaning tablet. If you like this guy, here's his vid on the subject: ruclips.net/video/fVJmLOUFoZ4/видео.html
my machine won't brew espresso after descaling. hot water spout and steamer wand do work.. But, now it won't brew. no water getting to brew.
It seems that my cleaning light appears exact every 2 months, alternating between flashing and solid (that is the solid light comes on every four months). Is this thing on a timer? It is pretty much on every 60 days.
Thanks!!
Thank you
How often is this supposed to come on. Owner my machine for more than 2 months, no indication. Old machine every 3 weeks
고맙습니다!
talked too much. Directly show the steps, please.
I did 1.75 times faster still, so much talk.