How to Make an Angled Screw Channel Implant in exocad
HTML-код
- Опубликовано: 7 сен 2024
- If a screw hole is on a labial surface, especially for an anterior, it doesn't look very good. In this case, the anterior prosthesis would be better if the screw hole is slightly tilted toward the lingual. Let's see how to adjust the hole position of an implant case in exocad.
Instructions (Please change "[" to open angled bracket and "]" to close angled bracket) :
[ImplantLibraryAllowScrewChannelAngles]true/[ImplantLibraryAllowScrewChannelAngles]
[ImplantLibraryAllowScrewChannelAnglesByUserDefault]true[/ImplantLibraryAllowScrewChannelAnglesByUserDefault]
[ImplantLibraryAllowScrewChannelAnglesByUserDefaultMaxAngle]30[/ImplantLibraryAllowScrewChannelAnglesByUserDefaultMaxAngle]
Subscribe for more information!
Visit our website - doflab.com
#EdwinCADCAMClass #angledscrewchannelimplant #exocad
#DOF #implant #angledscrew #exocadtip #digitaldentistry #DOFInc #3Dscanning #dentalcadcam #dentalprosthesis #dentaltechnician #dentallab #디오에프 #디오에프연구소 #덴탈보철물 #치기공사 #치과기공사 #엑소캐드 #임플란트 #명령어 #스크류채널
Good job. Explanation was soo comprehensive.
Thank you for your comment! 😍😘🥰
Excellent tips as always
Thank you for sharing sir
Hello, I am glad that you found this video helpful. Thank you for your love and interest!😘
Exceptional Video. Extremely clear in explaining.
Thank you for your comment! Glad that you like this video😍
Very informative trick
Thank you
I'm glad it was helpful! Thank you for your comment! 🥰😘😍
Good Video
I am glad that you like this video :) Thank you for your comment😍
Nice
thnak you Mr
Thank you for your comment!
Thank you ❤
amazing!! thank you so much Mr. Edwin :)
Thank you for your interest😘
Awesome tutorial! Thank you so much for clearly explaining!
If Mr. Edwin gets a chance, could he make a video on making a a bridge with a rest?
Thank you for your comment! Edwin would make a video on making a bridge with a rest next time :)
Good job, thx for this video. Its amazing
Thank you for your comment!
Thank you very much, I would like to ask you is this method useful in all types of implants
thank you
Thanks😍
Very good video thanks. A have this problem but in the exocad Rijeka 3.1. Can you help me? i try the comands that you put here but don´t work. Thanks
hi thanks for that, I had it done on Galway. now I am on Rijeka, is it possible or not
영상 감사합니다! 질문이 있어요! exocad에서도 3shpae처럼 스크루홀 옵셋값 조정이 가능할까요? 필요해서 찾아봤는데 못찻겠어요 ㅜㅜ
질문이있습니다.유독 implant direct 만 잉글을때 17도이상이면 스크류홀이 oval shape으로 바뀌는데 동그란 shape으로 만들수없읅까요?. 부탁드려요
확인 후 답변드리겠습니다. 질문 감사합니다! :)
Hello! not work, can you sen right version code, with changes? Thx
Hello, did you change [ and ] to angled bracket?
YES, AND NOT WORK IN REJIKA VERSION @@DOFinc
Its not working for Plovdiv 2.4 .
Great! Sub + Thank you
Thank you for your comment😍
But the screw will not be tightened completely, because the driver will not go into the screw head like it should be!!!
I think this can be applied only to Dynamic abutment, with a special screw and a special driver.
Or is there something I'm missing?!
I agree with you that special screws and drivers are required for angled screw type implants. Not only Dynamic, but also other companies sell the special screws and drivers.
Thank you for your interest and comment!
해당 문구 삽입하였는데 활성화가 되지않습니다 v2.3 6990/64 사용중인데 혹시 지원을 안하는 버전일까요?
해당 버전은 지원하는 버전입니다. 명령어를 정확한 위치에 삽입했는지, [ ] 괄호를 < > 괄호로 변경했는지 한번 더 확인 부탁드립니다. 문의주셔서 감사합니다!
On Instagram I saw today's story of DOF that you used 0 parameters on a crown, why?
It was just a milling test. Edwin wanted to show how precisely CRAFT 5X can mill. Thank you for your question and interest😍
crft 에서 ASC 가공이 되나요~?
메탈 디스크 가공은 불가능하지만, Link Abutment를 사용하시면 Angled Screw Channel Abutment를 제작할 수 있습니다.
또한 상부 구조물 까지 한번에 제작할 수 있기 때문에, 타 가공기에 비해 수월하게 Angled Screw Channel 보철물을 제작할 수 있습니다.
질문 감사합니다!😍