Спасибо за такой хороший урок, ваше видео, оказалось одним из самых полезных и понятных среди то остальных, из тех что я смог найти. Google translate: Thanks for such a good lesson, your video turned out to be one of the most useful and understandable among all the others that I could find.
hi thanks for sharing, by the way a facing head is not a facemilling cutter. This must be possible as we too have an HBM here with a Manual Guide - I on it but as they have mentioned this software is designed on doing less complex profiling in which way milling cycles on hbm can also be done apart from those special tooling like facing heads. (Facing head can also be simplified and/ or compared to a turning tool attached on a milling spindle and thus cylindrical cuts, more or less like a boring bar on milling , only that it the tool can be moved so as to make a bigger or smaller diameter as it cuts making it possible to do angles , tapers, grooves shoulders or even facing , as the tool plunges in. )
i need a conversational for my aurora seiki lathe with fanuc controller. i do reman stuff so theres very littler repetition . could i get a conversational package to add to my existing set up?
how do you engrave on an OD at different degrees? I have 3 part numbers that I need to engrave on the part 120 degrees apart! it keeps wanting to engrave in the same spot!! please help.
![Kodak Black - Catch Fire [Official Music Video]](http://i.ytimg.com/vi/A4ch-olIuZo/mqdefault.jpg)
Спасибо за такой хороший урок, ваше видео, оказалось одним из самых полезных и понятных среди то остальных, из тех что я смог найти.
Google translate: Thanks for such a good lesson, your video turned out to be one of the most useful and understandable among all the others that I could find.
hi thanks for sharing, by the way a facing head is not a facemilling cutter. This must be possible as we too have an HBM here with a Manual Guide - I on it but as they have mentioned this software is designed on doing less complex profiling in which way milling cycles on hbm can also be done apart from those special tooling like facing heads. (Facing head can also be simplified and/ or compared to a turning tool attached on a milling spindle and thus cylindrical cuts, more or less like a boring bar on milling , only that it the tool can be moved so as to make a bigger or smaller diameter as it cuts making it possible to do angles , tapers, grooves shoulders or even facing , as the tool plunges in. )
i need a conversational for my aurora seiki lathe with fanuc controller. i do reman stuff so theres very littler repetition . could i get a conversational package to add to my existing set up?
It's was be nice to share this software with students...
Inclined surface of fanuc grooves?
how do you engrave on an OD at different degrees? I have 3 part numbers that I need to engrave on the part 120 degrees apart! it keeps wanting to engrave in the same spot!! please help.
Can I have a program like this for lathe;
Where can I buy this software?
elwachanwer from q-mart
SEIMENS webinar are best
Yes, because they used the same damaged phone to represent such cool companies in webinar.
lol
Fanuc series oi tf
Ka vtl par kase nperate karange
Looks Like unintuitive software if it lets you delete all of the pitch forms without even giving you a warning!
Quero video em portuges
More Fanuc parts information at www.fanuc-controller.com
Nossa não tem nem um em português?
Voice not clear...
Portuguese ??????????????????????