from a professional set up car guy the fender is great.. one advice though.... ung screw sa dulo ng fender make sure na may nut kase in time kakalas ung screw na un.. dahil matatagtag... also another point is you could have put a double adhesive tape before installing... but kudos to you this is diy so no bad comments from me
Hindi ako Espresso owner but I really like how they vlog. Very simple and I can say kaya ko din ito because of them. So happy ako sa mga tipid tips nila bossing. Always waiting sa new vlog. God bless.
wow I'm not a hater BUT! I can't believe you used drywall screws. You should've used a nice decorative stainless screw. the flares do look great tho! The reason they are not going in all the way is because they are flared at the top in order to be (countersunk) into a construction material. Plus they have a tendency to rust and drip. I apologize if i seem negative but i love your channel and this kind of surprised me.
You’re right. That’s why I made another vlog replacing the black srews with stainless 🤗here’s the link ruclips.net/video/jUkuU4-WfeU/видео.htmlsi=31SUW3Uh9jmmkmIZ
yong bandang rear side suggest lang sir Dan..bago kasi pinutol yong dapat inangkop sya may kawang para deretso yong line mas ok tingnan anyway suggest lang naman.. pero malaki na save na dito vs sa casa.. i like this video
Yes po, yan din po yung plano ko, kaso hindi po uubra kasi mababanat ng husto yung fender tapos hindi na sya magmumukhang bilog, naka umbok na, hindi ko masyadong ma explain eh😅 ang ginawa ko nilagyan ko ng sticker yung gap, hindi ko lang nasama sa vlog na to. Salamat sa comment.
8:54 I thought a DIY aftermarket wheel arc fender set on a small car like Spresso would look horrible BUT I was wrong. The installation turned out to be a perfect match for this unit. They looked like factory-installed car accessory. The unit has become more rugged-looking (in a positive way). How about installing a lightweight low-profile bullbar next? : ) Some people would find those aftermarket fenders a revolting sight esp. on small hatchback units (Eon, Wigo, Spark) or even on, for crying out loud, lowered subcompact sedans (Vios, Accent). The Spresso (and Jimny), I guess, is an exception because of its innate rugged looks and higher ground clearance.
Weehhhh bossing nkasubsribe na kaya.. haha although di nman ako bbili ng spresso pro u remind my late father in law madiskarte pagdating sa kotse.may sarili gamit for air-conditioning,mechanic and car technician..at nkkatuwa ka..and funny and humble too..that's one the secret of a good vlogger I guess..
@@DanZieVlogs salamat din at naiappreciate nyon, pero you deserved that bossing,ng dhil sa diy mo sa SARILING car spresso mas nkatulong eto na mging interested Ang ibang inconsider Ang spresso sa bibilin Nila sskyan dhil may igganda pla eto...kala ko dati Yung lang ang itsura nyan sa market (basic) at ikaw Yung nagpabuhay ng spresso cars..nging astigin Ang dating sa road..goodlock manunuod pa ko ng ibang vlog mo..hehe
Nice juan! Dadami na tayong nakafender flares! After ko matry I hope yung iba nagkaron din ng confidence na magpakabit or magkabit (pero for me pinakabit ko) di kasi ako marunong baka masira ko pa but again boss! Amazing job sa diy!
No prob mga bossing! Thanks dins a videos! Lahat ng makashare ko hopefully kayo magvideo kasi Tamad ako wahaha so others can also take part into making our spresso look good! See on the road. Ride safe po sainyong dalawa 💗
Nice bossing hehe hanep ka talaga mg DIY walang kaba haha what if roof rack ang sunod mong accessories? hehe plano ko din yun ky Persy. Tanong ko lang di ba nyan mavovoid yung warranty since nagbutas ka ky spresso? Pa shoutout sa next vid bossing hehe thanks!
Offset ng gulong na lang kulang boss danzie para mas porma. Btw, ask ko lang yung muffler tip na kinabit mo sa spresso mo, di mo na ba pina-welding yun? Natatanggal kasi turnilyo nun takaw nakaw at baka matanggal pag nadaan sa lubak. God bless and RS always!
I get your point bossing, naisip ko din yun to cut the back fender para nakadugtong sa black part sa likod, pero hindi uubra kasi hindi magiging bilog yung fender kung baga hindi sya mag aalign. Ang hirap iexplain pero you’ll see what I mean kung magkakabit ka ng same fender.
As long as hindi maapektuhan ang engine walang problema bossing. Iba iba naman ang warranty, merong warranty sa shock, warranty sa wiring, warranty sa engine.
hindi kakayanin ng double sided tape bossing eventually matatanggal din lalo na kapag nabilad sa araw bubuka kagad. Kung yung side cladding na specific kay spresso 6k - 8k pre order sa casa, double sided tape lang ang pandikit nun tapos may plastic rivet na ikakabit sa ilalim no need mag butas. Ito kasi ay universal fender flares.
para sakin boss hindi maganda tignan naka fender flare si spresso kung hindi naman naka buka/ off set gulong mo. ginagamit kasi yan as mudguard sa mga naka labas na gulong. pero para sakin lang naman yun , basta happy kayo hehe.. ride safe lage boss.
@@DanZieVlogs try mo next sa vlog mo wheel spacer 25mm to 40mm ng Mr. offset , para lumabas gulong mo . may tulong din yun para hindi mag body roll spresso mo
Yes meron po. Order kayo sa casa nasa 7 to 8k yun. Maganda yun kasi no drill na saka fit talaga kay spresso, pero universal pinili ko kasi mejo nakaumbok sakto kasi ipapa off set ko yung gulong para mejo nakalabas.
Nice bossing hehe hanep ka talaga mg DIY walang kaba haha what if roof rack ang sunod mong accessories? hehe plano ko din yun ky Persy. Tanong ko lang di ba nyan mavovoid yung warranty since nagbutas ka ky spresso? Pa shoutout sa next vid bossing hehe thanks!
from a professional set up car guy the fender is great.. one advice though.... ung screw sa dulo ng fender make sure na may nut kase in time kakalas ung screw na un.. dahil matatagtag... also another point is you could have put a double adhesive tape before installing... but kudos to you this is diy so no bad comments from me
Thank you for the tip, I'm planning to replace it with rivet screw and put some adhesive.😇😁
same concern...
Hindi ako Espresso owner but I really like how they vlog. Very simple and I can say kaya ko din ito because of them. So happy ako sa mga tipid tips nila bossing. Always waiting sa new vlog. God bless.
Thank you
Solid, idol ‘to. King of DIYs. Before this year ends, may Silver Play Button na ‘to, mark my word.
Wow sana mag dilang anghel ka bossing.
Palagi po ako nanood sa inyo. Sobrang practical po ng vlogs niyo oks na oks po panoorin.
Salamat bossing.
wow I'm not a hater BUT! I can't believe you used drywall screws. You should've used a nice decorative stainless screw. the flares do look great tho! The reason they are not going in all the way is because they are flared at the top in order to be (countersunk) into a construction material. Plus they have a tendency to rust and drip. I apologize if i seem negative but i love your channel and this kind of surprised me.
You’re right. That’s why I made another vlog replacing the black srews with stainless 🤗here’s the link ruclips.net/video/jUkuU4-WfeU/видео.htmlsi=31SUW3Uh9jmmkmIZ
medyo nakakahurt sa feelings yung pagbubutas.. pero maganda naman ang outcome.. more power and more vid..
yong bandang rear side suggest lang sir Dan..bago kasi pinutol yong dapat inangkop sya may kawang para deretso yong line mas ok tingnan
anyway suggest lang naman.. pero malaki na save na dito vs sa casa.. i like this video
Yes po, yan din po yung plano ko, kaso hindi po uubra kasi mababanat ng husto yung fender tapos hindi na sya magmumukhang bilog, naka umbok na, hindi ko masyadong ma explain eh😅 ang ginawa ko nilagyan ko ng sticker yung gap, hindi ko lang nasama sa vlog na to. Salamat sa comment.
8:54 I thought a DIY aftermarket wheel arc fender set on a small car like Spresso would look horrible BUT I was wrong. The installation turned out to be a perfect match for this unit. They looked like factory-installed car accessory. The unit has become more rugged-looking (in a positive way). How about installing a lightweight low-profile bullbar next? : )
Some people would find those aftermarket fenders a revolting sight esp. on small hatchback units (Eon, Wigo, Spark) or even on, for crying out loud, lowered subcompact sedans (Vios, Accent). The Spresso (and Jimny), I guess, is an exception because of its innate rugged looks and higher ground clearance.
Thank you
saw one on a wigo and it was cute af
ayos yan boss.. sana nilagyan mo muna ng silicon ung black screw para hindi sisikin ng tubig ung butas para iwas kalawang..dagdag kapit na din..
Nice advice pwede ko pa naman lagyan.
Anong klaseng silicon po ang ilalagay?
Lalong gumanda kotse MO gayahin ko rin Yan at sayo ako magtanong Kong saan MO nabili mga accessories pra di na ako mahirapan.. Tnx
yun oh nalate ako mga idol nice keepsafe mga lods watching from saudi🔥♥️🙏🏻
So lahat ng putik at dumi sa loob ng fender flare mo mag accumulate sa kotse mo! Wow galing..
Syempre lilinisin mo rin 😂, kung hindi mo lilinisin talagang maiipon yan, bugahan mo lng ng tubig linis na yan. 😂
@@DanZieVlogswigo owner siguro yan
Weehhhh bossing nkasubsribe na kaya.. haha although di nman ako bbili ng spresso pro u remind my late father in law madiskarte pagdating sa kotse.may sarili gamit for air-conditioning,mechanic and car technician..at nkkatuwa ka..and funny and humble too..that's one the secret of a good vlogger I guess..
Sobrang na appreciate namin comment mo bossing. Maraming salamat
@@DanZieVlogs salamat din at naiappreciate nyon, pero you deserved that bossing,ng dhil sa diy mo sa SARILING car spresso mas nkatulong eto na mging interested Ang ibang inconsider Ang spresso sa bibilin Nila sskyan dhil may igganda pla eto...kala ko dati Yung lang ang itsura nyan sa market (basic) at ikaw Yung nagpabuhay ng spresso cars..nging astigin Ang dating sa road..goodlock manunuod pa ko ng ibang vlog mo..hehe
@@roberttan2202 maraming salamat.
Nice juan! Dadami na tayong nakafender flares! After ko matry I hope yung iba nagkaron din ng confidence na magpakabit or magkabit (pero for me pinakabit ko) di kasi ako marunong baka masira ko pa but again boss! Amazing job sa diy!
Thank you ma’am jane. Ride safe
No prob mga bossing! Thanks dins a videos! Lahat ng makashare ko hopefully kayo magvideo kasi Tamad ako wahaha so others can also take part into making our spresso look good! See on the road. Ride safe po sainyong dalawa 💗
@@janebbs5878 salamat. Ride safe.
Magkano po inabot nyo sa pagpapakabit?
Bagay na bagay sir unlike sa ibang eco cAr
Tuloy nyo lamg po yung vlogs nyo. Sana makabili din ako sa future. More power!
Salamat po.
New subscriber here bossing..Planning to buy suzuki spresso soon..more videos po!
Thank you bossing.
Importante sa lahat sa kotse MO lagyan MO NG cabin filter or air filter sa kotse MO sir mandali lng ikabit sa my aircon Yan
Meron na akong kinabit na cabin filter bossing
ruclips.net/video/7QKumrMVwWo/видео.html
I understood 20 percent 👍
What language is this? So interesting and funny at the same time.
Nice bossing hehe hanep ka talaga mg DIY walang kaba haha what if roof rack ang sunod mong accessories? hehe plano ko din yun ky Persy. Tanong ko lang di ba nyan mavovoid yung warranty since nagbutas ka ky spresso? Pa shoutout sa next vid bossing hehe thanks!
It won't affect the engine and other parts of the car bossing kaya hindi mabovoid.
@@DanZieVlogs ok ok salamat bossing hehe
Naol sir. Pwede ka mag open ng shop sir hahaha ako magiging suki mo pag ganun 😂
Very nice👍
Thanks
New subscriber idol
Thank you bossing.
Offset ng gulong na lang kulang boss danzie para mas porma. Btw, ask ko lang yung muffler tip na kinabit mo sa spresso mo, di mo na ba pina-welding yun? Natatanggal kasi turnilyo nun takaw nakaw at baka matanggal pag nadaan sa lubak. God bless and RS always!
Hindi ko na pinawelding, turnilyo lang so far hindi naman lumuluwag sana walang magtangkang magnakaw😅
Nice 👍
Thank you
salamat sa video. Hindi ba mag rust doon sa na drill mo na screw hole?
Speaking of rust ito bossing updated video ng universal fender A MUST WATCH ruclips.net/video/jUkuU4-WfeU/видео.html
Mujhko ertiga vxi cng 2020 model me wheel arch cladding lagwana hai, lag jaayegi kya? kitna paisa lagega
Dapat cut muna yun back fender para walang space. Na OC lang ako hehe
I get your point bossing, naisip ko din yun to cut the back fender para nakadugtong sa black part sa likod, pero hindi uubra kasi hindi magiging bilog yung fender kung baga hindi sya mag aalign. Ang hirap iexplain pero you’ll see what I mean kung magkakabit ka ng same fender.
Good day sir pwede poba malaman anung size ng fender flare ang kinuha mo salamat po
small po
Ang pogi ng s presso, pano ung warranty kpag ngkabit ng mga accessories hindi b mavoid?
As long as hindi maapektuhan ang engine walang problema bossing. Iba iba naman ang warranty, merong warranty sa shock, warranty sa wiring, warranty sa engine.
ouch. suggest ko sana double sided.yhen yung screw yung head lng nakadikit parang fake screw lang sana
hindi kakayanin ng double sided tape bossing eventually matatanggal din lalo na kapag nabilad sa araw bubuka kagad. Kung yung side cladding na specific kay spresso 6k - 8k pre order sa casa, double sided tape lang ang pandikit nun tapos may plastic rivet na ikakabit sa ilalim no need mag butas. Ito kasi ay universal fender flares.
Palitan mo nang 16inch offset na mags ... para mas maangas tignan
malapit na bossing
salamat bebe
sir lods. mas maganda po yung gold bolts or white golds na nabibili sa mga motor shop. para yayamanin hehe hindi kinakalawang.
Ito bossing yung version 2 nagpalit ako ng screws
ruclips.net/video/jUkuU4-WfeU/видео.html
Hi Sir. Di po ba kaya ng 3M tape para wala ng butas sa body? Thank you and God bless
Matatanggal bossing hindi matibay
Sakit mag drill
Yun lang need talaga magbutas pero wala naman akong balak tanggalin ying fender kaya ok lang.😄😁
hindi ba ma void ang warranty pag na butas sa body idol ?, gusto ko din sana to gawin sa new celerio ko
hindi po, wala pong warrant and body. Ang mga my warranty po ay engine, electrical, accessories, suspension
@@DanZieVlogs ok lods many tnx sa info
spr 👌👌👌
para sakin boss hindi maganda tignan naka fender flare si spresso kung hindi naman naka buka/ off set gulong mo. ginagamit kasi yan as mudguard sa mga naka labas na gulong. pero para sakin lang naman yun , basta happy kayo hehe.. ride safe lage boss.
Hehehe next upgrade natin bossing eh mags magpapa offset tayo.
@@DanZieVlogs try mo next sa vlog mo wheel spacer 25mm to 40mm ng Mr. offset , para lumabas gulong mo . may tulong din yun para hindi mag body roll spresso mo
Kinabahan ako boss hehehe.
Ano po ba purpose nyan fender flares?
not a good idea...its a no for me, but its your spresso, why not.
Others like it but some don’t. 😆😂
Boss san ka nakabile ng fender flair mu?
Nasa description po yung link.
Lods anung size sng fender flare mu? btw new subscriber here! More power
Nanjan po sa description yung link.
By doing this, it won't void the warranty of the vehicle?
As long as it won't affect the engine it won't void your engine warranty.
Ano kaya safety rating ng spresso parang ang lambot
May fender flare sa s presso na hindi kailangan e drill?
Yes meron po. Order kayo sa casa nasa 7 to 8k yun. Maganda yun kasi no drill na saka fit talaga kay spresso, pero universal pinili ko kasi mejo nakaumbok sakto kasi ipapa off set ko yung gulong para mejo nakalabas.
sir di po ba mavovoid ang warranty kapag naglagay ako ng ganyan?
Hindi po
Naka order na po ako sa Lazada ng fender flare at tape. Iyong stainless na screw may number ba iyon? Kasi dito ko na lang bibilhin sa amin. Salamat.
Ito yung version 2 nga fender flare installation at yung stainless screws yung nasa description ng video.
ruclips.net/video/jUkuU4-WfeU/видео.html
hi sir, ask ko lang. nabali kasi yung antenna ng suzuki spresso namin. any advice po?
meron pong mag car antenna na pwedeng mabili sa shoppee at lazada
Mas lalo naging astig S presso
Salamt bossing
Sir bro,hndi ba maapektuhan warranty ng car kung maglalagay ako ng ganyan sa car ko.God bless u bro
As far as I know, as long as it won't affect the electrical and engine hindi mabovoid ang warranty.
Pwede po ba yan sa suzuki celerio idol?
Hindi ako sangayon na butasan ang body ng car kasi dito magsisimula anf kalawang!
d ko maiimagine sarili ko na butasan ko c s preso ko, nanindig balahibo ko nang binubutasan na sa video. pero bilib ako sa guts nya bossing
Hindi po ba mavvoid ang warranty nya kapag nilagyan? Salamat po
Hindi po. Ang warranty is for the engine, suspension, accessories, wiring. Wala pong warranty ang body.
anong screw ginamit mo bosing?.... wood o metal
Wood black crew bossing yung matulis yung dulo.
may nabbiling rubber edge for fender flare mas pro ang dating
Good evening. Saan po ba nabili ang fender na yan?
Paki click nalang po yung description ng video nanjan yung link.
Boss pwede magtanong ano sukat nyan
Small size po
Bossing saan vlog nyo mkikita un ilalim ni Spresso tnx po!
Dito bossing ruclips.net/video/iaEL8pJQsXI/видео.html
Bossing may effect ba sa warranty yan?
pwede ba to sa celerio ?
Yes pwede
May screw na po yan?o bibili pa po?
Bibihan nyo pa po ito po yung version 2 ruclips.net/video/jUkuU4-WfeU/видео.html
Can i know what size this fender?
80.5 cm
bossing bakit nagasgagsan yung bandan likod? :(
Nagpark kami sa labas, tingin ko na sagi ng bike.
boss anong size ng black screw? Salamat po
Diuno lang bossing.
mahirap pala bossing kung ayaw mo na ng fender flare kasi nabutasan na fender ng sasakyan
Yes, wala naman akong balak tanggalin kasi ang ganda eh.
What size po yan kuya?
Ano po exact length and width ng kinabit nyo sir?
Nasa bandang dulo ng video ma'am yung size ng fender flare.
Wala ba yan sa shopee idols?
Meron bossing, make sure na ang sizw na mabili mo is 80cm or 80.5cm kapag malaki pangit na hindi bagay kay spressk
HM SIR
Boss Ano size nang fender flare mo?
Ito yung link bossing s.lazada.com.ph/s.WHXlV
Name of this iteam
fender flare
Buti hindi mahigpit c suzuki, sa iba kc basta may ginalaw k kahit wiring void agad warranty.
Pogi na magkano monthly nyan
8k monthy 5 years. Ito yung excat amount ng cash ojt bossing ruclips.net/video/VHwJ3jaugLc/видео.html
Prsh
Pahingi link bos.. Thanks po
Nasa description po bossing. :)
sayang pang nabutasan
Nice bossing hehe hanep ka talaga mg DIY walang kaba haha what if roof rack ang sunod mong accessories? hehe plano ko din yun ky Persy. Tanong ko lang di ba nyan mavovoid yung warranty since nagbutas ka ky spresso? Pa shoutout sa next vid bossing hehe thanks!
boss san po nyu nabili ang fender? salamat po
Nanjan po sa description ng video yung link.