Thanks for making this video. I've got a Jag Arms Super CQB and the SP, would love to get em upgraded like yours. Would be cool if you could post a short follow up video with the 6-shot range and spread you get with these new parts.
if you can, I'm looking to upgrade both of my shotguns, could you send me all the "item numbers" you bought for the shotguns? I found a couple of them, but i wanna make sure i have the right ones before i buy all the upgrades.
How did you get this SAT valve to work in this this cylinder valve? There's only the one tiny little translucent o-ring on the end of the the brass plunger of the SAT valve. This means it won't seal and hold air like the standard plunger which has the translucent o-ring but also a fatter black o-ring beneath it. Please let me know if you encountered this issue and how to fix it?
Thank you so much for making this, and for posting a detailed list of parts in the description, this is exactly what I needed. Do you notice a difference in performance between the barrel length, like with accuracy and/or grouping?
Better accuracy and higher fps. Always keep in mind tho it's a shotgun, the hop design is always going to limit accuracy and range. I'd only recommend spending the money on all the parts I did if you want a shotgun as a primary
@@Anonymous13440 lol a bit. The upgrades certainly are more for reliability and consistency rather then a massive performance boost. Shotgun hop ups and rubbers just leave a lot to be desired
@@jhqtechcrap! I forgot I even commented on this video! Thanks for the reply man! But I have a follow up question now! Could you make a video on how to remove the pump handle? The Reaper TS is out of stock at my local shop, and I wanted a little bit of longer length anyway, so I’m going with the sawed-off, but they only come with the non M-Lok pump handles. How would I remove it to replace it?
Do you have any recommendations on resources for disassembly and maintenance of these guns? You mentioned you can get better hop up rubbers, from who? Where?
@@jhqtech awesome, thanks. And you mentioned you can get better hop up rubbers. Where at? From who? Sorry, I’m new to shotguns and I’m coming up really short on resources for info and parts.
@@brianwright5055 SAT makes hop rubbers that are more resilient than the originals. They're harder to find now so you have to look around the internet for them.
That’s how you run shotys boyz great video bud
Thanks bud they are fun and feel so crisp when upgraded
The SAT high output valves dont exist anymore. 😢
can you do a disassembly vid for the cqb im struggling w mine
Where to buy the upgrades
Thanks for making this video. I've got a Jag Arms Super CQB and the SP, would love to get em upgraded like yours. Would be cool if you could post a short follow up video with the 6-shot range and spread you get with these new parts.
The range is hella far stock for the six burst mode
if you can, I'm looking to upgrade both of my shotguns, could you send me all the "item numbers" you bought for the shotguns?
I found a couple of them, but i wanna make sure i have the right ones before i buy all the upgrades.
Thanks for making this video. Was a big help!
is there a chance we could get a closer more in-depth look at the super cqb in a vid?
Useful vid I just got a Reaper TS myself and while I probably won't HPA it I'll be taking some of your other advice
I've been looking for an upgrade slide lock set but cant find any in stock any recommendations
How did you get this SAT valve to work in this this cylinder valve? There's only the one tiny little translucent o-ring on the end of the the brass plunger of the SAT valve. This means it won't seal and hold air like the standard plunger which has the translucent o-ring but also a fatter black o-ring beneath it. Please let me know if you encountered this issue and how to fix it?
Do you still have them and would you like to sell one?
Thank you so much for making this, and for posting a detailed list of parts in the description, this is exactly what I needed.
Do you notice a difference in performance between the barrel length, like with accuracy and/or grouping?
Better accuracy and higher fps. Always keep in mind tho it's a shotgun, the hop design is always going to limit accuracy and range. I'd only recommend spending the money on all the parts I did if you want a shotgun as a primary
After all these upgrades have you noticed a tighter grouping?
@@Anonymous13440 lol a bit. The upgrades certainly are more for reliability and consistency rather then a massive performance boost. Shotgun hop ups and rubbers just leave a lot to be desired
Great video ❤
How do you take off the orange tip?
@@BxgoldenB0Y36 plyers
@@jhqtech is it threaded or does it pop rite off?
@@BxgoldenB0Y36 it’s not threaded, just glued on
@@jhqtech awesome thank you
good afternoons I bought a TM M870 breacher and wanted to use HPA what upgrades do you advise?
Lube, orings, loading arms and pump arms
Does anyone know if the pistol grip takes gas or aeg motor grips? I wanna change mine after. 😅
Gas
@@jhqtechcrap! I forgot I even commented on this video! Thanks for the reply man!
But I have a follow up question now!
Could you make a video on how to remove the pump handle? The Reaper TS is out of stock at my local shop, and I wanted a little bit of longer length anyway, so I’m going with the sawed-off, but they only come with the non M-Lok pump handles.
How would I remove it to replace it?
Where did you get the pieces to change out the racking arm. Im very interested in that part
Do you have any recommendations on resources for disassembly and maintenance of these guns?
You mentioned you can get better hop up rubbers, from who? Where?
LaZouche Customs is the videos u used. And I misspoke the barrels are the wiitech 6.03 copper barrels
@@jhqtech awesome, thanks. And you mentioned you can get better hop up rubbers. Where at? From who? Sorry, I’m new to shotguns and I’m coming up really short on resources for info and parts.
@@brianwright5055 SAT makes hop rubbers that are more resilient than the originals. They're harder to find now so you have to look around the internet for them.
what the pump grip you have on the super cqb??
What site did you order the parts?for arms/valve/ and barrel
www.wiitech.com.hk/ for most. other sites I cant remember for a few
You still using the stock bucking?
Jag has a better feel for cheaper pretty much out of the box compared to TM
Yes the only thing tm has that's better is its hop up and the pistol grip on the breacher variant.
when did you get the loading arms? Ive been looking for a few months
Maybe 2 or 3 years ago
@@jhqtech ahhhh
What do you do for work.
So I’m planing on building a 18:1 8 tooth dsg using a warhead 45k, what is the weakest spring I can use without hitting PME?
Depends on ur battery. I'd say start with a guarder m150 and work your way up short stroking as necessary
I have a shs m150 is that similar in power to a guarder? Also, I’ll be using a 50c 11.1
@@rustty4817 shs is weaker than guarder. Also that's a big battery so you might hit pme
My friend got his to shoot 1,237fps I shit you not I got a reel on my ig
I Just got one 😂