You became a friend when you shared a prayer here…I can not thank you enough for not being ashamed of our God! Happy crafting my sister in CHRIST. By the way…Casting Crowns is one of my favorites 😊
First time, I "meet" you, thank you very much for sharing your talent😊, nice job and by the way, you surely are one of God's precious angels❤😇. Be very blessed 🙏
They're so pretty, and they're my favorite color. I'm going to try this method. I feel you, for God has brought me thru so much. Keep speaking of God, for there's someone out there who needs to know that they're not alone; and that people do care. Girl, I just love your enthusiam in your belief in God. Keep on testifying about just how good God is.
I love the gap, it's unique which I love! Thank you so much for today's prayer. When I get in the mood, I listen to kirk and my spirits lift right up. ❤
I just made beachy hoops yesterday using this method on some of my hoops I use for beading. So pretty! Also, I almost always like the side facing me the most! 🤣
Oh my word that sounds fabulous!!! I love that so much 😍 Hahaha I am so glad we don’t have to follow resin rules for what side has to be the front. 😂😂😂
Totally off topic in a way. But I follow your videos and I used dried flowers in resin earrings. After they cured I noticed the flowers stuck out of the resin in some areas. Can you please let me know how to fix this? Thank you very much!
So flowers want to float. You can do two things. After you have poured your resin you wait 30 minutes and come back and gently push the flowers down. Or you mix your epoxy, put your flowers where you want them and then wait like 30 minutes after you mix your epoxy because it will thicken just slightly and make it harder for the flowers to float. Does that make sense?
@@DezyJewelry yes but it's there anything I can do after the resin has set and the flowers and pieces of foil are still sticking out a little? I'm afraid they will pull out.
@@andreakinniard1894 yes!!! Make a small tiny batch of epoxy resin and put a thin thin layer over the top it should protect it. Or if you use uv resin you could do the same thing and put a thin layer in it and cure it. They call it doming
first thing first i am a new subscriber to your channel i love how happy you come on the channel it makes me feel good i love your prayer before you leave GOD' s blessing is upon you thank you for your prayers to all of use that see your channel and beyond l am a beginner with resin i wanted to ask you a question which is i want to make UV resin bracelet i have a few bracelet mole which are silicone can i use them with uv resin
Welcome welcome!!!!! Good question. UV resin needs clear or semi-clear molds so the light penetrates and cures the resin. It also can’t have a lot of coloring in the uv resin. Nothing too dark. If you have a clear/semi-clear mold and not much or little coloring then I would think it could work.
Thank you so much for your prompt reply i do have a clear silicone mole for bracelet can i use alcohol ink? with UV resin also if i pour UV resin in the mole with out ink just clear resin can i put dry flowers
Just found your channel and subscribed 😊just wanted to know where you got your wire cutters that you used with the turquoise coin bead necklace love that necklace 😊thanks
Hey Sandy welcome welcome!!!!! Thank you for subscribing! So they are electrician cutter tools and I got them from here: www.homedepot.com/p/Klein-Tools-Electrical-Wire-Stripper-Cutter-10-18-AWG-Solid-11045/100630729
YES!!! I tried doing a technique with the alcohol ink that I do with epoxy resin. and it didn’t work with UV resin. So I came to the conclusion I just need to mix the alcohol ink in the uv resin really well and not use a lot. And it takes away the chances of alcohol ink puddles.
You became a friend when you shared a prayer here…I can not thank you enough for not being ashamed of our God! Happy crafting my sister in CHRIST. By the way…Casting Crowns is one of my favorites 😊
Hello sweet sister in Christ!!! I love casting crowns too!!! Thank you for leaving such a sweet comment. It blessed my heart!!! 🥰❤️
Thank you for being you
God bless
Thank for praying
Awww thank you for the sweet comment. It blessed my heart!!! You are so welcome ❤️🙌 my pleasure. I love praying for everyone. 🥰
I learn a new technique, and I spend time with a sister in Christ, what more could I ask for!! God bless you!
awww your comment made my day!!! Blessings to you and yours!!!
I am so glad to find your channel.. You have the most beautiful energy. Preach it girl.. Hugs from Buffalo
Awww 🥰 thank you Rose from Buffalo. Thank you for such a sweet comment!!! It blessed me!!!
First time, I "meet" you, thank you very much for sharing your talent😊, nice job and by the way, you surely are one of God's precious angels❤😇. Be very blessed 🙏
I love your worship message. Thank you for all you do😊
Thank you so much. 🙌❤️ you are very welcome 🥰
Thanks for sharing your wonderful video!!
I love that you pray at the end of your videos❤❤❤ I'm at glad the Lord sent me to your videos today. I pray the Lord blesses you abundantly🙏❤️
Me tooo!!!! ❤️❤️❤️ I love how God does that. Tickles me 🤭. Thank you so much for your prayers it means a lot to me. 🥰
Not dried but cured! Clever technique!
Hahaha some times my brain says dry sometimes it says cure. 😆😆😆 I know it’s cure but sometimes dry just pops out if my mouth.
Thank you so much 😁
Thank you for sharing the Lord with us Amen
My pleasure. ❤️🙌✝️
Thank you for taking the time to write an encouraging comment!!!
They're so pretty, and they're my favorite color. I'm going to try this method. I feel you, for God has brought me thru so much. Keep speaking of God, for there's someone out there who needs to know that they're not alone; and that people do care. Girl, I just love your enthusiam in your belief in God. Keep on testifying about just how good God is.
Thank you. I am so glad you like the jewelry piece.
Thank you for cheering me on. It helps me keep going. Blessings on you and yours!!!! 🙌❤️
I’m so glad your back and doing resin work
❤️❤️❤️
Super cute!!!
When you open up the earring hoop, open it like a jumpring. Opening it the way you did can weaken the metal.
I love the gap, it's unique which I love! Thank you so much for today's prayer. When I get in the mood, I listen to kirk and my spirits lift right up. ❤
Oh I love that. 😍❤️🙌 Love me some Kirk Franklin!!!
That is jaw dropping. I love it.
❤️❤️❤️ thank you so much!!! 😁
Love them awesome
I am so glad you love them. 🥰
Thank you again for your prompt reply i will try it do the bracelet will let you know how it come out thanks again many blessings
Fold-over tape. Great tip!
Thank you Daddy-O ❤️❤️❤️
Love these earrings
❤️🥰 thank you so much
I just made beachy hoops yesterday using this method on some of my hoops I use for beading. So pretty! Also, I almost always like the side facing me the most! 🤣
Oh my word that sounds fabulous!!! I love that so much 😍
Hahaha I am so glad we don’t have to follow resin rules for what side has to be the front. 😂😂😂
Totally off topic in a way. But I follow your videos and I used dried flowers in resin earrings. After they cured I noticed the flowers stuck out of the resin in some areas. Can you please let me know how to fix this? Thank you very much!
Question did you use epoxy resin or UV resin.
My guess is you used epoxy but I want to double check before I give my answer. 😁
@@DezyJewelry epoxy
So flowers want to float. You can do two things. After you have poured your resin you wait 30 minutes and come back and gently push the flowers down. Or you mix your epoxy, put your flowers where you want them and then wait like 30 minutes after you mix your epoxy because it will thicken just slightly and make it harder for the flowers to float.
Does that make sense?
@@DezyJewelry yes but it's there anything I can do after the resin has set and the flowers and pieces of foil are still sticking out a little? I'm afraid they will pull out.
@@andreakinniard1894 yes!!! Make a small tiny batch of epoxy resin and put a thin thin layer over the top it should protect it. Or if you use uv resin you could do the same thing and put a thin layer in it and cure it. They call it doming
first thing first i am a new subscriber to your channel i love how happy you come on the channel it makes me feel good i love your prayer before you leave GOD' s blessing is upon you thank you for your prayers to all of use that see your channel and beyond l am a beginner with resin i wanted to ask you a question which is i want to make UV resin bracelet i have a few bracelet mole which are silicone can i use them with uv resin
Welcome welcome!!!!! Good question. UV resin needs clear or semi-clear molds so the light penetrates and cures the resin. It also can’t have a lot of coloring in the uv resin. Nothing too dark. If you have a clear/semi-clear mold and not much or little coloring then I would think it could work.
I appreciate your prayers for us. A lot of times it hits me square on. Thanks.
Oh I love hearing that. Thank you for taking the time to share that!!! ❤️🙌
Thank you so much for your prompt reply i do have a clear silicone mole for bracelet can i use alcohol ink? with UV resin also if i pour UV resin in the mole with out ink just clear resin can i put dry flowers
Alcohol ink can be used if you mix it well but not to just drop it in and let it spread.
Yes you can put flowers in the clear uv resin.
Just found your channel and subscribed 😊just wanted to know where you got your wire cutters that you used with the turquoise coin bead necklace love that necklace 😊thanks
Hey Sandy welcome welcome!!!!! Thank you for subscribing! So they are electrician cutter tools and I got them from here: www.homedepot.com/p/Klein-Tools-Electrical-Wire-Stripper-Cutter-10-18-AWG-Solid-11045/100630729
@@DezyJewelry thanks for the information
You are very welcome.
I want to get the jewelry kit
I just started using UV resin. I'm wondering, since it cures with UV light, is it still safe for customers to wear outside?
Yes once it is 100% dry you should be good to go.
Do you ever have puddled alcohol ink on your pieces. What to do to prevent this?
YES!!! I tried doing a technique with the alcohol ink that I do with epoxy resin. and it didn’t work with UV resin. So I came to the conclusion I just need to mix the alcohol ink in the uv resin really well and not use a lot. And it takes away the chances of alcohol ink puddles.
Do you have to keep room dark
No you don’t
What kind of tape are you using
It is resin tape but rumor has it you can use packing tape as well.
Here is an example of it:
amzn.to/3lEruzf