I ordered a USB C x USB C cable to try. I am going to indoor flying tonight. I am charging up some HRB 6Ss 3300mah packs. They have XT 60 connections. I am going to use them as the input power.
One major issue with this charger. Cannot discharge or storage. I have it, but I'm carrying another one just to put batteries in storage. I need to do that, because sometimes I'm out for week or more and unable to fly all the time.
For storage charge it's possible to set voltage to 3.8V. It can't discharge internally, but it can use a battery to power anything over USB C port (except 1S batteries, those have too low voltage for that to work)
For discharging a battery you have a cheap atorch DL24 (150 Watt) those small little chargers are not made for any discharging, but 608pd had an update thanks to the App, and has now storage and discharge mode by connecting a second battery to the input
On the back of the INIU BI-B5 power supply it says. Output 1/2 DC, 4.5V=5A, 5V=4.5A, 9V=2A, 12V=1.5A. But I am using the larger USB to USB C cable that comes with the power supply. I tried plugging the charger into a AC 120v outlet with a USB adapter and it worked fine. So it must be the power supply
Hi, I bought this 608 charger and a INIU BI-B5 power supply. It charges a few small batteries and quits. I think it because of the power supply only putting out 5V. And the changer limits the input to 5V. I can't seem to change the charger to a lower input voltage. And I can't seem to get the power supply to put out more than 5v. It seem like it automatically picks its 5v output. Any ideas on how to fix this? I guess buy a different power supply. But do they all automatically pick their output voltage ?
Hi, thanks for your comment! It sounds like your power supply might be the issue here. The INIU BI-B5 likely defaults to 5V because it’s operating in a USB power delivery (PD) mode that doesn’t negotiate higher voltages with the ISDT 608PD charger. My first thoughts are 1. Check the power supply’s specs: Confirm if it supports higher output voltages (e.g., 9V, 12V, or more) and ensure it complies with PD standards. 2. Verify your cable: Make sure you’re using a high-quality USB-C cable capable of handling PD negotiation. Lower-quality cables can sometimes cause power negotiation issues. 3. Try another power supply: Some power supplies auto-detect the required voltage, while others need a compatible device to negotiate higher outputs. Look for one that explicitly supports PD output up to 20V and is recommended for use with devices like the 608PD. A popular choice for chargers like this is a dedicated DC power supply or a PD power adapter with adjustable voltage. 4. Consider using the DC input: If you have access to a compatible DC power source, you might bypass the issue entirely by using the DC input instead of relying on USB PD. Let me know if any of these solutions help 😊
If charging from a USB solar panel and a cloud passes in front of the sun, (loss of source power) will the charger continue from where it left off once power is restored, or will it require input from a person to start the charge process again?
this needs another review.. things you missed.. -you didn't show USB PD output.. this is how you discharge to a target voltage .. or charge another battery. -firmware updates.. 1.0.1.10 is what mine came with.. what was in the 3 releases since then? I'm unsure. wish the app would allow finer charge amps selection like the buttons do. but I guess that'd be an app update not firmware.
Dear Sir. Your amazing channel give hope to keen learner like myself- Many thanks. I have a Dji smart controller w/ air2s (horrible slow charging with Dji charger). I was wondering if this would do trick and gives me fast charging of my DJI Smart Controller and batteries ? I can connect it to my off-road vehicle 12v lithium ion battery using XT60. I would be grateful for your feedback. Cheers
I ordered a USB C x USB C cable to try. I am going to indoor flying tonight. I am charging up some HRB 6Ss 3300mah packs. They have XT 60 connections. I am going to use them as the input power.
One major issue with this charger. Cannot discharge or storage. I have it, but I'm carrying another one just to put batteries in storage. I need to do that, because sometimes I'm out for week or more and unable to fly all the time.
For storage charge it's possible to set voltage to 3.8V.
It can't discharge internally, but it can use a battery to power anything over USB C port (except 1S batteries, those have too low voltage for that to work)
For discharging a battery you have a cheap atorch DL24 (150 Watt) those small little chargers are not made for any discharging, but 608pd had an update thanks to the App, and has now storage and discharge mode by connecting a second battery to the input
Hi I'm thinking about buying this charger soon. How has it been for you so far. Are you still using it. Have you downloaded the storage mode. Thanks
Another good review
Thanks again!
On the back of the INIU BI-B5 power supply it says. Output 1/2 DC, 4.5V=5A, 5V=4.5A, 9V=2A, 12V=1.5A. But I am using the larger USB to USB C cable that comes with the power supply. I tried plugging the charger into a AC 120v outlet with a USB adapter and it worked fine. So it must be the power supply
If you can, try another supply to prove it.
@@WhirlyBloke I bought a IMIU 140 watt power supply. It comes with a USC C x USB C cable with a chip in it for high discharge. It works perfectly now.
Hi, I bought this 608 charger and a INIU BI-B5 power supply. It charges a few small batteries and quits. I think it because of the power supply only putting out 5V. And the changer limits the input to 5V. I can't seem to change the charger to a lower input voltage. And I can't seem to get the power supply to put out more than 5v. It seem like it automatically picks its 5v output. Any ideas on how to fix this? I guess buy a different power supply. But do they all automatically pick their output voltage ?
Hi, thanks for your comment! It sounds like your power supply might be the issue here. The INIU BI-B5 likely defaults to 5V because it’s operating in a USB power delivery (PD) mode that doesn’t negotiate higher voltages with the ISDT 608PD charger.
My first thoughts are
1. Check the power supply’s specs: Confirm if it supports higher output voltages (e.g., 9V, 12V, or more) and ensure it complies with PD standards.
2. Verify your cable: Make sure you’re using a high-quality USB-C cable capable of handling PD negotiation. Lower-quality cables can sometimes cause power negotiation issues.
3. Try another power supply: Some power supplies auto-detect the required voltage, while others need a compatible device to negotiate higher outputs. Look for one that explicitly supports PD output up to 20V and is recommended for use with devices like the 608PD. A popular choice for chargers like this is a dedicated DC power supply or a PD power adapter with adjustable voltage.
4. Consider using the DC input: If you have access to a compatible DC power source, you might bypass the issue entirely by using the DC input instead of relying on USB PD.
Let me know if any of these solutions help 😊
If charging from a USB solar panel and a cloud passes in front of the sun, (loss of source power) will the charger continue from where it left off once power is restored, or will it require input from a person to start the charge process again?
Does it charge lithium ion battery packs ,Please answer i really want to know thanks
Yes, it does. The full spec is here isdtshop.com/en-gb/products/isdt-608pd
this needs another review.. things you missed..
-you didn't show USB PD output.. this is how you discharge to a target voltage .. or charge another battery.
-firmware updates.. 1.0.1.10 is what mine came with.. what was in the 3 releases since then? I'm unsure. wish the app would allow finer charge amps selection like the buttons do. but I guess that'd be an app update not firmware.
I left that as an exercise for the viewer 😃
Dear Sir. Your amazing channel give hope to keen learner like myself- Many thanks. I have a Dji smart controller w/ air2s (horrible slow charging with Dji charger). I was wondering if this would do trick and gives me fast charging of my DJI Smart Controller and batteries ? I can connect it to my off-road vehicle 12v lithium ion battery using XT60.
I would be grateful for your feedback.
Cheers
Unfortunately, not. DJI batteries are smart and can only be charged as fast as their internal charge and balance circuits allow.
Much appreciated!
Do you have a recommendation?
Cheers
Cool but I still use my older 300w isdt pocket charger. Just get a usbC to xt60 cable or adapter.
That's still a great and classic charger.
@@WhirlyBloke doesn't have the app but perfect otherwise
No one mentions where to get the app
There's a QR code in the manual.
@WhirlyBloke your a Genius