Thank you for the video. This gave me confidence to flash Bluejay. After that I enabled Bidirectional Dshot and RPM filtering. The difference is great, as seen by Blackbox logs and motor heat!
Glad it helped and also if you want here is the new updated version of the video that I remade for you all to be able to follow even easier and with more details and depth to it and if u need any help and I am able then I will be more than happy to help as long as you just hmu and let me know ......Have a Merry Christmas and a Happy New Year!!!!
Infelizmente não consigo conectar meu drone. Quando conecto a bateria o usb desconecta automaticamente. Só consigo configurar no betaflight o protocolo oneshot125. Poderia me ajudar? obrigado
@@KCQuadTronX ontem, eu fiz um teste. Conectei a controladora de voo via usb, e removi os 12 volts de energia que vinham da matek pdb. consegui conectar usb junto com a bateria...mas não resolveu em nada. Ainda sem conseguir acessar os motores em dshot.
Your more than welcome!!! So did you learn what you needed to from this video?? If not always feel free to ask me and I will be more than willing to help as long as I am able at that specific time ....I just can't wait to help as many as I can by releasing more and more content like this and much more
@@KCQuadTronX I did but i still have problems . I flashed blue jay fine then after that went to btft to connect . I checked my motors it said %100.00, I have elrs receiver and a zorro elrs I'm connected to controller every time i arm it goes full throttle. I don't really know what I'm doing, last time it happened I never had the battery all the way plugged and the battery unplugged so i plugged it in again then a tiny little puff came fome motor then a little bit bigger puff of smoke came from esc . I found the spot it's on esc where the battery wires soldiered on esc beside that little ceramic capacitor there's two and one of them burnt. After all that I plugged in and motors still work . I gave up after that . Do you think i can replace the ceramic capacitor or should i buy a new one.
@@manleyjoedesjarlais7568 well first off you need to go to the motors tab and make sure they r all spinning the correct direction by going into the motor direction wizard and also make sure your props are on the correct way .....after that I can be pretty sure it should work ....and yes I would replace the capacitor,they are a dime a dozen ....well not technically lol but you get what I mean ..... Maybe just your lead from the battery touched something it shouldn't have but may still be ok if that's all you did
Did the new version of 21 that they just released burn up your escort or did the old version of it burn it up cause there has been a warning on the page to not go past 19.2 due to literally what you said happened but now there's a new release of . 21and I am testing it on a smaller quad for the moment,but I'm still to scared to fully move all my quads to the newer so i am definitely leaving them all on 19.2 for now
@@KCQuadTronX i lost the ability to flash second i uploaded i got ???? marks on all the escs i coulndt go back to blheli 32 or anything they didnt exsist its after i aplied power my other drone i flashed to 21 but never powered up i imidiatly reflashed back to 19.2 and its fine.. so i lost 100 dollar fc i tossed it and rebuilt the drone im never flashing escs again
With my NewBeeDrone I plug it in, it shows up as a thing to be selected in ports, it connects, but then I click read settings, and it says "Missing an ESC?" I did accidently flew it into water and it still worked right after. But a few hours later one of the motors was acting funny. It would not spin up easily and would turn on and off. But when in ESC Configurator I could change the speeds of the motor that was acting weird and it worked perfectly fine. If you could help me with what to do to fix this "Missing an ESC?" problem. That would be nice
So can you shoot me an email with a video of your problem.....it sounds like it fried one of the ESC motor channels because that's usially what it does when something is wrong with one of the channels but since you said it spins up in esc configurator then maybe not....my email is zerocool7277.csh@gmail.com and even if you can't send a vid then email me and I we can swap contact info so I can better help u if you wanna
thanks for they video, having issue with changing motor 1 direction stays counter on my dron and switched motors so its not the motor. i tried this esc config but it wont read my ESCs on my mama mk4 aio any tips ???
yes i can help you out but i need to know a bit more about your setup.....also what version betaflight and bluejay do you have flashed to it ?? also Betafloight 4.4.2 has Dshot issues and wont let you change motor direction on most quads and until tjhey come out with 4.5 or a newer 4.4.2 then you need BF4.4.0 for the time being now on 9/20/23 so if you can get back with me and I will try to help ...also we can chat on discord and go live if needed ...IO will do anything I can to help get you in the air and to stay in the air....
Wow ok so I have never ran into this problem but hopefully you should be able to just retry the flash process.. With Your Transmitter Off Anytime your doing an ESC or FC Firmware update ..but especially ESC configurator as it can cause this very issue .....so try to reflash and see if it will work that way......if you wanna I can help you out one on one no problem just please let me know and then we can try and figure this thing out together.....
okkay so juts look at the top of the window and you should be able to see what the target it....May I ask what flight controller your using and esc or aio ....I need to know the name and type specifically ..Example: SpeedyBee F405 Mini V2 with 35 amp 4in1 esc or like jhemcu 40amp AIO v4 or something like that will help me to just tell you your target for your specific esc
Yes unfortunately I do believe you have to first open with chrome then you can install it as a separate app ..,.I have an updated version of this video that will be released in the next few days that will be packed full of more details and updates and a more detailed vid that I hope helps you all even more ......Thanks for watching and if you have anymore questions please feel free to ask and we will work through it together
So do you have a Battery plugged in when you hit the Read ESC button??? If so then try a different cord and then if that doesn't work please let me know and we will figure it out
I ha e had these issues as well .....Please make sure your battery is plugged up before you try pushing the Read the ESC Button..,. First also make sure Betaflight is not connected to your quad in the background or it won't be able to connect to ESC Configurator.....then plug up your quad to USB and then plug up your battery and click the Connect Button in ESC CONFIGURATOR and try again .....then if this doesn't work you can.try a few other things I will share with you.....just let me know and thanks for watching and I hope you enjoyed and learned ....I will add this issue and the solution we come up with to a video most likely to help anyone else in this situation ...please let me know what happens...
and also their discord is useless its just a ton of people saying hi.. no help or support what so ever i lost 100 dollars and took me 5 days to rebuild my drone.. not cool guys
I'm so sorry that you had to go through all of that and lose your money when it could have been probably helped simply that somebody would have just tried to help you simply and fix it..... May I ask what is going on and did you get it fixed
Thank you for the video. This gave me confidence to flash Bluejay. After that I enabled Bidirectional Dshot and RPM filtering. The difference is great, as seen by Blackbox logs and motor heat!
I'm so pleased that this video helped you give you the courage to flash blue jay and that it all worked out for you happy flying
Nice one very simple to follow for a first time user of blurjay
Glad it helped and also if you want here is the new updated version of the video that I remade for you all to be able to follow even easier and with more details and depth to it and if u need any help and I am able then I will be more than happy to help as long as you just hmu and let me know ......Have a Merry Christmas and a Happy New Year!!!!
@@KCQuadTronX thanks mate
Very helpful, simple and informative
Glad it was helpful! and You got what you needed from it that is what the channel is all about !!!! Stay safe out there pilot!!!
Infelizmente não consigo conectar meu drone. Quando conecto a bateria o usb desconecta automaticamente. Só consigo configurar no betaflight o protocolo oneshot125. Poderia me ajudar? obrigado
Yes I'm trying to troubleshoot your problem now and figure it out... I'll am HOPING to get back with an answer soon just hang in there
@@KCQuadTronX ontem, eu fiz um teste. Conectei a controladora de voo via usb, e removi os 12 volts de energia que vinham da matek pdb. consegui conectar usb junto com a bateria...mas não resolveu em nada. Ainda sem conseguir acessar os motores em dshot.
Please check your USB/serial Port - und power-connection to the interface (error are showing)
great video
Thanks for the visit
Thanks for the video.
Your more than welcome!!! So did you learn what you needed to from this video?? If not always feel free to ask me and I will be more than willing to help as long as I am able at that specific time ....I just can't wait to help as many as I can by releasing more and more content like this and much more
@@KCQuadTronX I did but i still have problems . I flashed blue jay fine then after that went to btft to connect . I checked my motors it said %100.00, I have elrs receiver and a zorro elrs I'm connected to controller every time i arm it goes full throttle. I don't really know what I'm doing, last time it happened I never had the battery all the way plugged and the battery unplugged so i plugged it in again then a tiny little puff came fome motor then a little bit bigger puff of smoke came from esc . I found the spot it's on esc where the battery wires soldiered on esc beside that little ceramic capacitor there's two and one of them burnt. After all that I plugged in and motors still work . I gave up after that . Do you think i can replace the ceramic capacitor or should i buy a new one.
@@manleyjoedesjarlais7568 well first off you need to go to the motors tab and make sure they r all spinning the correct direction by going into the motor direction wizard and also make sure your props are on the correct way .....after that I can be pretty sure it should work ....and yes I would replace the capacitor,they are a dime a dozen ....well not technically lol but you get what I mean ..... Maybe just your lead from the battery touched something it shouldn't have but may still be ok if that's all you did
@@KCQuadTronX Thank you very much I really appreciate it . I'll give it another go tomorrow .
Just let me know and I will help you out the best I can.....
dont flash beyond 19.2 21 destryoed my ecs
Did the new version of 21 that they just released burn up your escort or did the old version of it burn it up cause there has been a warning on the page to not go past 19.2 due to literally what you said happened but now there's a new release of . 21and I am testing it on a smaller quad for the moment,but I'm still to scared to fully move all my quads to the newer so i am definitely leaving them all on 19.2 for now
@@KCQuadTronX i lost the ability to flash second i uploaded i got ???? marks on all the escs i coulndt go back to blheli 32 or anything they didnt exsist its after i aplied power my other drone i flashed to 21 but never powered up i imidiatly reflashed back to 19.2 and its fine.. so i lost 100 dollar fc i tossed it and rebuilt the drone im never flashing escs again
With my NewBeeDrone I plug it in, it shows up as a thing to be selected in ports, it connects, but then I click read settings, and it says "Missing an ESC?" I did accidently flew it into water and it still worked right after. But a few hours later one of the motors was acting funny. It would not spin up easily and would turn on and off. But when in ESC Configurator I could change the speeds of the motor that was acting weird and it worked perfectly fine. If you could help me with what to do to fix this "Missing an ESC?" problem. That would be nice
So can you shoot me an email with a video of your problem.....it sounds like it fried one of the ESC motor channels because that's usially what it does when something is wrong with one of the channels but since you said it spins up in esc configurator then maybe not....my email is zerocool7277.csh@gmail.com and even if you can't send a vid then email me and I we can swap contact info so I can better help u if you wanna
hello. i have faced this some problem. have you find fix for this problem? maybe you can advice something? thanks
@@ВадимМазур-ф6в i am trying to figure it out now and i willll get right back to you in a day or so
i am about ot have you an answer hopefully
thanks for they video, having issue with changing motor 1 direction stays counter on my dron and switched motors so its not the motor. i tried this esc config but it wont read my ESCs on my mama mk4 aio any tips ???
yes i can help you out but i need to know a bit more about your setup.....also what version betaflight and bluejay do you have flashed to it ?? also Betafloight 4.4.2 has Dshot issues and wont let you change motor direction on most quads and until tjhey come out with 4.5 or a newer 4.4.2 then you need BF4.4.0 for the time being now on 9/20/23 so if you can get back with me and I will try to help ...also we can chat on discord and go live if needed ...IO will do anything I can to help get you in the air and to stay in the air....
@@KCQuadTronX much appreciated i figured it out, i was using they esc config wrong
I left my transmitter on and unplugged my receiver. Now esc 1 is missing. Is there a fix for this issue using betafpv f4 aio fc
Wow ok so I have never ran into this problem but hopefully you should be able to just retry the flash process.. With Your Transmitter Off Anytime your doing an ESC or FC Firmware update ..but especially ESC configurator as it can cause this very issue .....so try to reflash and see if it will work that way......if you wanna I can help you out one on one no problem just please let me know and then we can try and figure this thing out together.....
Hay buddy having issues at 3.45 where you say do not select the esc but its asking me to it don't fill it in itself
okkay so juts look at the top of the window and you should be able to see what the target it....May I ask what flight controller your using and esc or aio ....I need to know the name and type specifically ..Example: SpeedyBee F405 Mini V2 with 35 amp 4in1 esc or like jhemcu 40amp AIO v4 or something like that will help me to just tell you your target for your specific esc
also if you need me more directly you can jump on discord or email me as well
@@KCQuadTronX hay buddy thanks for the reply. Im trying to put bluejay on my tinyhawk race all in one esc/fc
@@blessfpv i am trying to get you an answe now.....so does it connect to esc configurator and give you the option to flash it to bluejay at least?
@@KCQuadTronX that would be great bro thanks
Dont you have to be on chrome too?
Yes unfortunately I do believe you have to first open with chrome then you can install it as a separate app ..,.I have an updated version of this video that will be released in the next few days that will be packed full of more details and updates and a more detailed vid that I hope helps you all even more ......Thanks for watching and if you have anymore questions please feel free to ask and we will work through it together
Hi, I kept getting an error "Failed reading ESC 1, Failed reading ESC 2, Failed reading ESC 3, Failed reading ESC 4". Do you know how i can fix this?
So do you have a Battery plugged in when you hit the Read ESC button??? If so then try a different cord and then if that doesn't work please let me know and we will figure it out
I ha e had these issues as well .....Please make sure your battery is plugged up before you try pushing the Read the ESC Button..,. First also make sure Betaflight is not connected to your quad in the background or it won't be able to connect to ESC Configurator.....then plug up your quad to USB and then plug up your battery and click the Connect Button in ESC CONFIGURATOR and try again .....then if this doesn't work you can.try a few other things I will share with you.....just let me know and thanks for watching and I hope you enjoyed and learned ....I will add this issue and the solution we come up with to a video most likely to help anyone else in this situation ...please let me know what happens...
@@KCQuadTronX Did all this, no chance can use beta flight, motors working fine, but esc config cant load esc
Sounds like a bad ESC most likely @@ortchris
@@KCQuadTronX jup, got my new one, was fixes directly
and also their discord is useless its just a ton of people saying hi.. no help or support what so ever i lost 100 dollars and took me 5 days to rebuild my drone.. not cool guys
I'm so sorry that you had to go through all of that and lose your money when it could have been probably helped simply that somebody would have just tried to help you simply and fix it..... May I ask what is going on and did you get it fixed
4:53 ,can i flash on my aio fc?
Yes you should be able to as long as you follow the video exactly...is it a blheli-s ESC and if so what kind is it