Is the bypassing unit (or compressor) modes purpose to allow swapping the compressor (or other repairs) without having to shut down all the system (all units)?
boss i have a doubt regarding the multiple outdoor unit like for example if the remote control shows an error where should we need to troubleshoot the master unit not for slave am i right?
Hi Sir, Thanks for sharing your knowledge, i would like to your upload vrv all troubleshooting videos..I'm also increased my skills. I have one doubt if slave unit CU failure will do emergency setting master unit? Or slave unit?. Thanks!
Mr. Bon Mj thank you for sharing your skills and knowledge and some advice Can i ask? I incounter U4 and U2 of the VRV3 Multi split 1accu 5fcu What is your advice sir😢
Mr bon thank you first Can i ask you , how to making a demarrage test for the compresseur in main unit and slave 1 , and 2 , inverter and standard .vrv 3
Is that the same procedure when you wil bypass other slave,ex. Salave 3,same procedure?when you fix the problem of the unit ,what is the procedure to return in normal operation
We call it by pass,the correct word is ermergency settings. Procedure is same. Master unit 38times Slave 1 39 times Slave 2 40 times. Same procedure to deactivate
off the indoor unit.and off the outdoor unit too,on back the outdoor power supply (H2P light blinking)and press reset more than 5 second.till outdoor H2P light off.(H3P light on)
Other tech was replaced all of them less than a year and it’s failed again. Do you think there’s a other problem that causing compressor become damaged? Thanks
What is problem? And Solution??? Compressor NG? Because same problem i face in Bangladesh this ERROR E5.. Please give replay what i do. Compressor take 12.11Amp Than come 4.2, & 1.9 A then stop. After 3 time pcb commamd E5 error.in remote. Thanks
@@BonMj Sir, thanks for replay Sir i check inverter pcb means, IGBT pcb Install in mno. 01 slave Then Compressor is run smoothly. So pcb is ok. Now what can is done? # out door fan also run. # when Compressor start amp comp 12.11Amp that time solenoid valve 1 is Anam other 2 is off.
The best videos of photography and explanation
Thanks 🙏🙏
Thanks for sharing your knowledge Sir..
Thanks for watching my video
Thank you my teacher
Thanks
Mr Bon well done mate .I like you channel .
Thanks
Did you code out on the master or slave ?
thanks for sharing your knowledge about the troubleshooting i learn a lot from your channel brother keep up the good work new friend here 🙏👏🙏👏🙏👏🙏👏🙏👏
Thanks bro
Is the bypassing unit (or compressor) modes purpose to allow swapping the compressor (or other repairs) without having to shut down all the system (all units)?
Can
What is CU Slave 2 sir,and thanks for sharing knowledge,god bless you
This is multi outdoor unit.
Mean got 3 condensing unit.
Main,slave1,slave2.
boss i have a doubt regarding the multiple outdoor unit like for example if the remote control shows an error where should we need to troubleshoot the master unit not for slave am i right?
wow nice video im also A/C isntallation in saudi arabia but not to isntall VRF and VRV
👍👍
Hello Boj thx for sharing ,please how do I know a slave1 compressor on multisystem is bypassed or not?
Many thanks
VVR3?
Very nice,thank you
Thanks
Thank you .
Thanks alot Sir usefull trening
Thanks
V nice ❤❤❤
Thanks
Hi Sir,
Thanks for sharing your knowledge, i would like to your upload vrv all troubleshooting videos..I'm also increased my skills.
I have one doubt if slave unit CU failure will do emergency setting master unit? Or slave unit?. Thanks!
All setting at master unit
@@BonMj Thanks you Sir
Without remove communication cable do this settings ?
mr bon this one compressor fault or pcb also
Pcb.
Normally will recommend replace inverter compressor too.
Bon.what is the good value of coil thermistor and air sensor of Daikin split unit.. thanks a lot bon
Thermistor reading?
Thanks
Thanks
Thanx sir
Thanks
I have question sir. Its same set up on emergency bypass setting model# RXQ16TAYM?..
Pls send me how to set emergency baypass sir. Thank u..
What you want to by pass compressor or cu
Hi Bon Mj can you explain to how to do vrv3 inverter compressor emegency setting
Sigle cu or multi cu?
Mr. Bon Mj thank you for sharing your skills and knowledge and some advice
Can i ask?
I incounter U4 and U2 of the VRV3 Multi split 1accu 5fcu
What is your advice sir😢
Do you check the income voltage and DC voltage (550V)DC
@@BonMj yes sir and its only 380 volts
But in the accu the lead light h2p ang the last led beside h7p is blinking also
@@BonMj thank you for your help sir im in Cebu
@@albertarmecin6671 inverter board 380VDC?
@@albertarmecin6671 h7p blinking ..mean this is CU slave 1.
H2P Led on mean got error code.
Long press Reset button the clear the history.
Mr bon thank you first
Can i ask you , how to making a demarrage test for the compresseur in main unit and slave 1 , and 2 , inverter and standard .vrv 3
Check the running amps
Is that the same procedure when you wil bypass other slave,ex. Salave 3,same procedure?when you fix the problem of the unit ,what is the procedure to return in normal operation
We call it by pass,the correct word is ermergency settings.
Procedure is same.
Master unit 38times
Slave 1 39 times
Slave 2 40 times.
Same procedure to deactivate
@@BonMj tnx very much for the knowledge its a big help for me ill sahre your vids to my page rgarding hvac also tnx God bless
@@BonMj can i have your WhatsApp number
@@BonMj thank you so much✊🏻
Hi mr Bon daikin vrv 3 error code U0 what should I do..is there not enough gas? please help me
Please check pressure
How to recharge emergency setting to normal setting.
Is there a no-compressor mode?
What you mean?
👍🤳🇹🇷🛠️
Thanks
Hi sir if i replace the compressor what I can do the normal sistem
Just replace the compressor charging gas test run
Thanks sir advice for everybody 🙏
is VRV 2 & VRV 3 has the same pcb bard ,hat are the difference,
Different
@@BonMj sir how about the procedure of emrgency setting of vrv 2 & vrv3 is it the same
@@riquesalvador check in Google’s,,,,,😉
Hello mr.
I have h2p light flashing
And h3p light on
In vrv daikin 3
Can you help me please
Try press off power supply and on back.
Press return button more than 10second and wait till h2p light off
Make friends to share experiences
Sure.
Thanks
@@BonMj do you have zalo
What is Zalo my friend.
Zalo apps?
@@BonMj yes
Bon sar how to indoor bypass
How about setting to bypass if 1 indoor is defective,tnx in advance new fren here
off the indoor unit.and off the outdoor unit too,on back the outdoor power supply (H2P light blinking)and press reset more than 5 second.till outdoor
H2P light off.(H3P light on)
@@BonMj ok sir thats all & it should run the unit?ok sir tnx ill try it,the unit is vrv2
Hi, I have the same error e5, all compressor is not working, how to reset e5 error?
Check inverter Pcb and inverter compressor
I checked with my inverter checker and found pcb is okay and inverter compressor failed in both master and slave.
@@LeoTechrac u need to replace both inverter compressor,better replace together pcb
Other tech was replaced all of them less than a year and it’s failed again. Do you think there’s a other problem that causing compressor become damaged? Thanks
sir bon i have encounter the error code E5-02..in VRV IV model no. RXQ14TTL..can you please help me how to solve this problem..thanks and god bless...
Check inverter pcb and inverter compressor
Inverter compressor over current
bro H3P got light only what problem ?
Vrv3 got light is normal.
Master CU
Hi sir how to find inverter compressor and standard compressor then how to find faulty inverter compressor
The compressor connect to inverter pcb is inverter compressor.
The compressor connect to magnetic contactor is standard compressor.
@@BonMj super sir thank you so much
How to find standard compressor -1 & 2 ?
Sir help me daikin vrv3 error code p4 modal rxyq12pry6
RXQ12 PCB BOARD H2P AND H3P LED UP OUT DOOR UNIT NOT RUN .HIW DO REST AND RUN one vedio
Press reset button more than 5second.
What is emergency settings sir
By pass
Master unit inverter emargency settings sir pls help code
Master unit cant by pass inverter compressor. Only can by pass master unit
I want learn more
Thanks
Selev 2 bypass this setting only mastar run
bypass cu 2 means CU 2 not use ?
Yes.temporary cu2 not in use.
Can set back after repair.
Help me share my video.thanks
@@BonMj Yes master
@@BonMj 师傅这台E5是要换compressor 么？😀
@@janshaw5472 是的。
What is problem? And Solution???
Compressor NG?
Because same problem i face in Bangladesh this ERROR E5..
Please give replay what i do.
Compressor take 12.11Amp
Than come 4.2, & 1.9 A then stop.
After 3 time pcb commamd E5 error.in remote.
Thanks
Please sir give a solution.
Check inverter pcb
Or inverter compressor
@@BonMj
Sir, i check inverter pcb, means igbt pcb is ok.
Because i install in slave 01 compress, and run Compressor is ok.
@@BonMj
Sir, thanks for replay
Sir i check inverter pcb means, IGBT pcb
Install in mno. 01 slave
Then Compressor is run smoothly.
So pcb is ok.
Now what can is done?
# out door fan also run.
# when Compressor start amp comp 12.11Amp that time solenoid valve
1 is Anam other 2 is off.
Daikin is the worse system to be installed in an apartment complex.