here's a tip on how I get all my oil out. After you pour it in the jerry can, pour it back into the oil container and swish it around a little. Then pour it back into the jerry can.
Finally, the driving video of this beast is here! I druel of this car in the previous video and wondering when this video would come out. Hope you putting out at least one more hard driving ripping video of this wonderful car. Thanks DJ Medic and Everett! Take care guys!
@RCSparks Studio. A little helpful tip after you pour the oil in your gas container shake it up then pour some of your gas/oil mix into the mixing container and swish it around then pour that back into your gas container that way you get all the oil out of your mixing container
That is a beast! But it does look like it could do with bigger wheels and tyres which will give it a better ground clearance, but still a nice truck! Good job!
I usually don't comment but as always your build vids especially this Kraken Build is by far the sweetest 5th scale I've ever seen!!!! love all your vids from open box to your how too and passion for this hobby. especially how you make this hobby so much fun for everyone. Your ability to make this hobby fun and inspiring to the kids with small low budget RC to something as big and expensive like 5th scale for people like my father who got me into the hobby. Again awesome build and looking forward for more to come.
Its viewer like you that has helped make this show happen UT Man :) We really do our best to comment to everyone - but there are so many of you that show love. Really cool bud, and thank you, too :)
RCSparks Studio your welcome Aaron. your videos are the whole reason why I have over 30 rcs. I love your channel. thank you for making such great great videos :)
I love castrol 927 thats all ive ever ran in my 2 stroke dirt bikes my dad swore by it its what i was raised on nothing better than the smell of 927 burning in the morning at the mx track
anonymous only thing I broke on my Rovan 1/5 scale Baja was the Dogbones so I made solid steel Dogbones oh and I let it sit outside in 20 degrees whether for 3 hours then ripped it and the plastic spur shattered lol
Huh..... Im guessing the tires are to small and ugly, the axle is ugly, i hate music and its a lemon! There are a lot of unhappy people with nothing positive to say but its your right to post your opinions. Sorry for the little rant and i understand you can never make everyone happy. O by the way awesome build! 👍😎
Aaron that thing is a BAB ---- Bad As... Beast! May not reply often but watch all your video's & Always hit the like 0 - & lots of them are in saved favorites so I can watch them over and over ! Looks a lot like a 3200cc Sand Rail a buddy owned back in the 70's!
yo medic....its T.C. from Mi. I'm happy to say you have been a very very valuable informational influence on the hobby of "rc" . I'm have recently gotten back into it..this year and proud to say i have quite the collection so far.. 1. traxxas slash fox body.....vettara k-5 rtr....ecx barrage....with a custom 54 chevy body i painted for my girlfriend......a 1/18 4×4 slash......and most recently two trx4's one red one grey...the one is mine the grey one is her's....with many upgrades on the ecx..both slashes and my k-5 is finally riding on 2.2's the trx4's are our main focus as im slowly getting the upgrades coming.... me and Jamie have pattern our rc adventures after you and jem's....with the trx4's...between the backwoods and our local parks it's been a blast...oh yeah i almost forgot two boats joined the team last week...traxxas blast and a 1/10 scale fishing boat...i had to try the hole rc fishing deal..... I'm really in need of a couple of "crazy-joes" 1/10 scale trailers...any responses would be greatly appreciated. two thumbs up to you my friend. keep up the excellent work..
RCSparks Studio got it... well i really appreciate the information on it.... well i guess big-dog. or rc4wd will be getting some of my business soon..thanks again...
love these 5th scale videos, DjMedic! Keep it up.. Especially the Kraken vids. Been watching your vids for 7 years now and finally I am able to get a 5th scale of my own!
*BBRRRRRRRRAAAPPP!!!* Release the KRAKEN!! 😎👍👍👏👏👏 Seeing the slo-mo, watching that huge Suspension work was a real treat!! That Rig is SO Impressive. Thanks Aaron and Everett!! Carmine 🚂
It seems to land jumps a little too nose heavy.... Back when I raced 1/8th Nitro Buggies, that meant I needed to soften the rear some. Is it the same with these monsters??
I'm Rick from Pocatello ID and I cant wait until U guys get that fully dialed in. That baby is going to SHRED HARD!!! That is the Sweetest Sickest Truck I have seen Yet! Keep Up the good work and I cant wait to see it rip again! Very Nice!!!
Great show and what a beast (the Kraken). Love these first runs after watching it being build. Don't think I'll ever get something that size (no joke intended) so it's great fun watching it here. Good music choice (Epic for something Mepic) and nice slo mo. Love to watch the suspension at work. Thumbs up.
Amazing buggy. It looks like it handles the track well. Look forward to seeing it go on the track once broken in with some damp dirt on the track for traction!
thanks for the video fellas it will make me take a closer look at mine when I start working on it next week. Nice looking vekta the rims make the aluminum parts pop. NICE
When I mix my oil and fuel I pour a good amount of gas from the can into the oil measuring cup to dilute and mix any left over oil, then that goes back into the mixed gas can. That way you get exactly what you measured out from the cup.
Oh yes!!!!! There she is, the love of my life!!! 😍😍😍😍😍😍😍😍😍😍😍😍😍😍 Braaaaaaaap, Braaaaaaaaaaaaaaap, BRAAAAAAAAAAAAAAAAAAAAAAAAP!!!!!! Nice ride guys, I can't wait to get mine someday!!!!
awesome bud. love the fact you guys are taking this on together. definitely doubled the fun..lol.. she runs great brother and it looks good on the track.. thanks for sharing..🖒😎
lil tip on mixing gas and oil for two stroke .....if you put oil in gas container first when you pump the gas on top of it ....it helps it mix ....still good idea to shake container but ...oil first then gas on top .....at least thats what a very good mechanic (lead tech for team ktm) told me at a endero motorcycle race ....
EV TEKL good point ....never owned a nitro rc wanted one since I was a kid but just wasn't ever in budget .....but still now at 40 they are still so cool ...love to have a 1/5th scale with a hot 32cc...two smoker ....
Just tip a bit of the fuel back into the tub, mix it round and into the jerry can, you get every bit out of it then and don't have old oil sitting in the measuring tub.
Splash some gas into your mixing cup/ratio-rite to clean it out and get all of the oil into your mix gas can. Then stuff it with a rag to keep the dust out. brappppp
Rhode island. nice buggy medic looks mean and tough thanks again for the hard work and time your channel has made the Hobby really take off in my opinion brother.
if you poured a little bit of gas in the measuring cup and sloshed it around and poured it in the gas can to get all the oil out, the residual gas left in measuring cup will evaporate before its next use, leaving a empty clean measuring cup.
Awesome. Been waiting for this video :-) Watching from Australia. Pity the arm broke. You weren't even abusing it. Keep up the 5th scale vids. I love em!!
good morning, my good friend, it's nice to see the king helping out..You both have done so much for the hobby I can't even find the words to thank you both for all of the help and support, let alone the outstanding details and depths that you both go into..My Next is the Kraken..My only problem now is trying to keep up with you has me up to 35 shelve Queens ,At this point my friend what would be the best way to get rid of alot and flip it back in to the hobby , I'm so hooked on the 1/5 scale.. I already have these Losi buggy already have the Losi T5 and I've got my eye on that new ride, All of them have been hopped up thanks to all you have tought me about everything.. Please give my best to the lovely jem and and big shout out to
because he caught me off anyway big shout out to all your friends family and thank them all for me take care of God bless keep up the good work Aaron you to Everett..
Loving this one thanks for sharing very important information giving thanks blessed love to all knowledge is power hopefully everyone pays attention keep up the good work 🙏🙏🙏🇯🇲🇯🇲🇯🇲💪💪💪
BRAAAAAAAAAAPPPPPPP!!!!!!!!!!!!! Yewwwwwwwwwwwwww :D
BRRAAAAAPPPP!!!!!!! so much yes!!!
Mark Hepple ii
Abs
Hi
here's a tip on how I get all my oil out. After you pour it in the jerry can, pour it back into the oil container and swish it around a little. Then pour it back into the jerry can.
s_man 16 that's a dirtbike owners trick haha nice tip dude.
17madracki17 haha yep!
s_man 16 yes. but doesn't work for me as the container would have gas smell. I leave it in my truck cab year round.
I should have read the comments before posting ha!
EV TEK well then take it out of your truck
I think it would look a little better with some bigger tires
Yep! Bigger tires and maybe a different shell?!
Like maybe the ones from his Killer Krawler.
a different shell? hell no
killer krawler tires LOL i hope that was a joke
absolutely not. :p
Definitely needs a little bit bigger tires, thats my opinion though
Finally, the driving video of this beast is here! I druel of this car in the previous video and wondering when this video would come out. Hope you putting out at least one more hard driving ripping video of this wonderful car. Thanks DJ Medic and Everett! Take care guys!
I love those fire covered springs
@RCSparks Studio. A little helpful tip after you pour the oil in your gas container shake it up then pour some of your gas/oil mix into the mixing container and swish it around then pour that back into your gas container that way you get all the oil out of your mixing container
MGP CUSTOMS good tip but I can't stand a smelly container after. hard to have in the truck cab you know.
I hear ya there
That is a beast! But it does look like it could do with bigger wheels and tyres which will give it a better ground clearance, but still a nice truck! Good job!
I usually don't comment but as always your build vids especially this Kraken Build is by far the sweetest 5th scale I've ever seen!!!! love all your vids from open box to your how too and passion for this hobby. especially how you make this hobby so much fun for everyone. Your ability to make this hobby fun and inspiring to the kids with small low budget RC to something as big and expensive like 5th scale for people like my father who got me into the hobby. Again awesome build and looking forward for more to come.
Troy Thorsen awesome to hear. thanks for sharing.
I'd much rather hear the wind AND the engine then just music 😜😄
Id much rather have a mix :)
RCSparks Studio What's the music?
that is just badass. I've wanted any fast rc my whole life but never been able to afford one with 4 kids.
I love large scales. they are tons of fun. I've never had a 2 stroke 5th scale yet. I want one badly:)
I love seeing you comment in every video. Thank you for your passion for the vids, UTM :)
RCSparks Studio I always comment on your videos to show support. It means so much to me when I get a notification that you reply to my comment:)
your welcome as well :)
Its viewer like you that has helped make this show happen UT Man :) We really do our best to comment to everyone - but there are so many of you that show love. Really cool bud, and thank you, too :)
RCSparks Studio your welcome Aaron. your videos are the whole reason why I have over 30 rcs. I love your channel. thank you for making such great great videos :)
that thing is absolutely sick looking!! and castor 927 mix smells awesome!!
Central PA BMX/MX Riders I fully agree.
Looking awesome bro !
I love castrol 927 thats all ive ever ran in my 2 stroke dirt bikes my dad swore by it its what i was raised on nothing better than the smell of 927 burning in the morning at the mx track
The KRACKEN is finally released out of the dark deep sea!!!! :)
anonymous only thing I broke on my Rovan 1/5 scale Baja was the Dogbones so I made solid steel Dogbones oh and I let it sit outside in 20 degrees whether for 3 hours then ripped it and the plastic spur shattered lol
anonymous yes it broke,so what,throw in a alum one and it's live again,there are no rc that doesn't break
Huh..... Im guessing the tires are to small and ugly, the axle is ugly, i hate music and its a lemon! There are a lot of unhappy people with nothing positive to say but its your right to post your opinions. Sorry for the little rant and i understand you can never make everyone happy. O by the way awesome build! 👍😎
Forget all the peeps saying its ugly and needs bigger tires if you like it thats all that matters!!!! I think it looks badass.
You should call your track "track sparrow" cause it beat the KRAKAEN 👍🏻👍🏻👍🏻
Chod Carpenter Kraken-Slayer
Aaron that thing is a BAB ---- Bad As... Beast! May not reply often but watch all your
video's & Always hit the like 0 - & lots of them are in saved favorites so I can watch
them over and over ! Looks a lot like a 3200cc Sand Rail a buddy owned back in the 70's!
bean oil,,, ahhhhh,,, love it,,, 927 is what I run in my dirt bike's . I had to stop the vid. at 1:30 to comment.
Agreed with Ev! Castor 927 is one of the best Oils out there for sure! Great work guys!
awesome vid. nice job
Tell us, WHERE in the World are you Watching From?!
RCSparks Studio Ontario canada
RCSparks Studio Ontario Canada
RCSparks Studio from Romania
RCSparks Studio
NY
RCSparks Studio Florida
This is so cool! I want to see a tug-of-war between the Vekta 5 and the Xmaxx 8s
yo medic....its T.C. from Mi.
I'm happy to say you have been a very very valuable informational influence on the hobby of "rc" .
I'm have recently gotten back into it..this year and proud to say i have quite the collection so far..
1. traxxas slash fox body.....vettara k-5 rtr....ecx barrage....with a custom 54 chevy body i painted for my girlfriend......a 1/18 4×4 slash......and most recently two trx4's one red one grey...the one is mine the grey one is her's....with many upgrades on the ecx..both slashes and my k-5 is finally riding on 2.2's
the trx4's are our main focus as im slowly getting the upgrades coming....
me and Jamie have pattern our rc adventures after you and jem's....with the trx4's...between the backwoods and our local parks it's been a blast...oh yeah i almost forgot two boats joined the team last week...traxxas blast and a 1/10 scale fishing boat...i had to try the hole rc fishing deal.....
I'm really in need of a couple of "crazy-joes" 1/10 scale trailers...any responses
would be greatly appreciated.
two thumbs up to you my friend. keep up the excellent work..
Hi Terry! Awww, my friend Krazy Joe stopped making them a few years ago, unfortunately :(
RCSparks Studio got it...
well i really appreciate the information on it....
well i guess big-dog. or rc4wd will be getting some of my business soon..thanks again...
Has anyone done a full trophy truck build on one of these yet?
Quite a few guys are retrofitting losi 5ive t rollcages with 30 deg north body panels on these.
_RC_KING_ yes,I have,search: xianchen liu on RUclips,I've uploaded a few video
_RC_KING_ yes check out the kraken vekta Facebook group. Lots of awesome information in there.
Good job man. Looks Awesome! I'd love to do a 5th Formula Off-Road one day...
I love the body of that truck and the chassis with the exhaust on top 👍🏼
why not put bigger tires on
1) It'd probably make it more prone to breakage
&
2) Bigger tires would make it less torquey
love these 5th scale videos, DjMedic! Keep it up.. Especially the Kraken vids. Been watching your vids for 7 years now and finally I am able to get a 5th scale of my own!
u need biger wheels bro
you guys r crazy love the way that bad boy just kicks over like nothing track is starting to look good to thanks for the video guys
360p early squad
still watching lol
That's really nice! Don't want a big rig running on pogo stick shocks with out oil like how some of the tamiya kits come!
no offence i hate the look. of it i like the baja 5bs fav 1/5 scale
Ludlow Massachusetts been watching for about 3 years now love the show you do good work
nice truck but that shiny rear axle is kinda ugly.
adilator chill dog
*BBRRRRRRRRAAAPPP!!!*
Release the KRAKEN!! 😎👍👍👏👏👏 Seeing the slo-mo, watching that huge Suspension work was a real treat!! That Rig is SO Impressive. Thanks Aaron and Everett!!
Carmine 🚂
It seems to land jumps a little too nose heavy.... Back when I raced 1/8th Nitro Buggies, that meant I needed to soften the rear some.
Is it the same with these monsters??
That thing looks so ugly with those tiny rims and tires!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
this is one reason way I still love my rampage MT PRO. all aluminum big tires 32cc and Dominator pipe and I have good time play with out worries
You could tell uguy were excited about the build!!
man its so sweet lucky you id let you guys run my rigs anyday of the week any time
9:10....awesome dub in lol. Thumbs up on the build and rig!
I'm Rick from Pocatello ID and I cant wait until U guys get that fully dialed in. That baby is going to SHRED HARD!!! That is the Sweetest Sickest Truck I have seen Yet! Keep Up the good work and I cant wait to see it rip again! Very Nice!!!
I still would want one. Looks like a blast to blaze around the track. good luck & see ya in the next upgrade video.
Forrest Havron it's awesome. just luck.
Great show and what a beast (the Kraken). Love these first runs after watching it being build. Don't think I'll ever get something that size (no joke intended) so it's great fun watching it here. Good music choice (Epic for something Mepic) and nice slo mo. Love to watch the suspension at work. Thumbs up.
Amazing buggy. It looks like it handles the track well. Look forward to seeing it go on the track once broken in with some damp dirt on the track for traction!
what a beast just freaking awesome and the wheels are so far out must be very stable ride gjb greeting from Holland :D
definetly want to see more of this car !
That is a pretty sick build man. The rear axle is a work of art!
thanks for the video fellas it will make me take a closer look at mine when I start working on it next week. Nice looking vekta the rims make the aluminum parts pop. NICE
Love it! Bad luck with the arm.. shocks too... 👍
When I mix my oil and fuel I pour a good amount of gas from the can into the oil measuring cup to dilute and mix any left over oil, then that goes back into the mixed gas can. That way you get exactly what you measured out from the cup.
Another reason I love this channel.. NO CUSSING
Life goals. I will have a 5th scale rc before I die.
So sweet! Loved this video. Covered so much information. I learned a lot. Keep it real.
I love how it sounds like a dirtbike.
Bad ass little truck,watching from Arizona.
I'm not really a fan of gas powered trucks, but I watched every second of this video because damn that thing is pretty!
We run the Caster 927 on our Karts. Good stuff!!
I want to see you two racing these on your track!
Oh yes!!!!! There she is, the love of my life!!!
😍😍😍😍😍😍😍😍😍😍😍😍😍😍
Braaaaaaaap, Braaaaaaaaaaaaaaap, BRAAAAAAAAAAAAAAAAAAAAAAAAP!!!!!!
Nice ride guys, I can't wait to get mine someday!!!!
Hahaha cant wait for the big dirty . More videos of the kraken please
Nice build n vid! No biggie on the probs guys....as we all know...thats the rc life!
Cool
Watching this is a sight to behold, amazing work medic
Wish I had a rc buddy. Beautiful build.
Oh man that KRAKEN looks awesome!!!!!!!
That is so awesome. WOW!!!!!!! One of these days I will own a RC car or truck. Keep up the awesome job. Awesome dudes.
awesome bud. love the fact you guys are taking this on together. definitely doubled the fun..lol.. she runs great brother and it looks good on the track.. thanks for sharing..🖒😎
lil tip on mixing gas and oil for two stroke .....if you put oil in gas container first when you pump the gas on top of it ....it helps it mix ....still good idea to shake container but ...oil first then gas on top .....at least thats what a very good mechanic (lead tech for team ktm) told me at a endero motorcycle race ....
Donny Wilcox good tip. but I don't like to do that. then it smells of gas forever. I leave it in my truck always.
EV TEKL good point ....never owned a nitro rc wanted one since I was a kid but just wasn't ever in budget .....but still now at 40 they are still so cool ...love to have a 1/5th scale with a hot 32cc...two smoker ....
that is one BAD-RAD build...so cool..! thanks for showing us ..
USA Minnesota what a awesome truck!
A RIPPER SOUNDS GREAT, CANT WAIT TO SEE IT FULL THROTTLE.
Great Video! Jakarta, Indonesia
Man that thing is awesome! Great build
I love your channel!!! Rc addict i am, addicted is a understatement
aka boss man... that is some scale dust you got there. nice work!
Wow! that thing is just amazing ! My hats off to you sir !
Whoa. That shock looks bigger in your hands than on the truck. Lol
beautiful rig bro!! the paint job is amazing on this. shock bags are nice, perfect flow with paint theme....
I love my 5ive T, but I would love a Kraken! :) Amazing looking machine. RELEASE THE KRAKEN!!
Rapid City, South Dakota.
Very jealous, want that rig so bad lmao. Looks good.
Just tip a bit of the fuel back into the tub, mix it round and into the jerry can, you get every bit out of it then and don't have old oil sitting in the measuring tub.
RC Fun Everyday You right i do that to
RC Fun Everyday not good for me though. the container is ruined with gas after smelling. I leave it in the cab of my truck always.
Ahhh yeah, that would be a problem lol, my mixing stuff and all my oil and fuel is left outside.
Splash some gas into your mixing cup/ratio-rite to clean it out and get all of the oil into your mix gas can. Then stuff it with a rag to keep the dust out. brappppp
Had the same issues with my Vecta...both front shock seal caps backing out and leaking. Only solution was to Loctite them. Like the Wheels very slick!
good job! nice engine sound lil music great break in
Rhode island. nice buggy medic looks mean and tough thanks again for the hard work and time your channel has made the Hobby really take off in my opinion brother.
Love this unique look!!! It looks so mean!!!
Viewing from Texas!!
badass kraken !!! nice job guys . looks like fun 👍
a tip just put a little bit of gas in the oil container arfter you poor it in then it will mix with the gas and all goes in
Time stopped when I heard this thing start up!
you are the best guys congratulations from spain
if you poured a little bit of gas in the measuring cup and sloshed it around and poured it in the gas can to get all the oil out, the residual gas left in measuring cup will evaporate before its next use, leaving a empty clean measuring cup.
Awesome. Been waiting for this video :-)
Watching from Australia.
Pity the arm broke. You weren't even abusing it.
Keep up the 5th scale vids. I love em!!
good morning, my good friend, it's nice to see the king helping out..You both have done so much for the hobby I can't even find the words to thank you both for all of the help and support, let alone the outstanding details and depths that you both go into..My Next is the Kraken..My only problem now is trying to keep up with you has me up to 35 shelve Queens ,At this point my friend what would be the best way to get rid of alot and flip it back in to the hobby , I'm so hooked on the 1/5 scale.. I already have these Losi buggy already have the Losi T5 and I've got my eye on that new ride, All of them have been hopped up thanks to all you have tought me about everything.. Please give my best to the lovely jem and and big shout out to
because he caught me off anyway big shout out to all your friends family and thank them all for me take care of God bless keep up the good work Aaron you to Everett..
WIL WHITE sounds awesome. Cheers.
Greenfield, Maine!! Great video you guys
you guys always put on a fantastic show !
Loving this one thanks for sharing very important information giving thanks blessed love to all knowledge is power hopefully everyone pays attention keep up the good work 🙏🙏🙏🇯🇲🇯🇲🇯🇲💪💪💪
awesome rig bro. cheers from Toronto