This is absolutely BRILLIANT!!!! Thee best design and thee best video and I am a 67 year old woman who isd getting worse at doing things and my phone protector is perfect, just perfect and the phone looks like new. I would recommend this to anybody.
This is actually a pretty good design. You can align the protector before actually installing it, the #2 and 3 film tabs effectively remove any remaining dust on the screen and you get a good, bubble-free install. It's a bit of a convoluted process, but the results are better than most plastic screen protectors out there.
Holy crap! That was great. Followed the step-by-step and came out with a screen that has no bubbles underneath. It came out better than the ones the guys did at the phone store for me. Like someone said, it is a bit convoluted, but it ends with really good results.
Happy I read the comments. As confusing as it is, it’s definitely a quality screen protector. You don’t even notice it’s there and feels pretty good. Can’t say durability as it hasn’t been on for a while.
Screen protector is amazing, it's thin and barely visible, application is easy (if you have a few small bubbles left when using the squeegee it's fine. Absolutely worth it!
Great product, applied perfectly on the first try. Really thoughtful design. After removal of the first layer it is easy to readjust the film as many times as needed until it is aligned perfectly without worrying about bubbles - they will go away as you peel layers 2 and 3 like it is done in the video.
Just fitted mine good job it came with more than one screen as the tabs on first attempt just pulled off instead of pulling the plastic on second attempt no issues tabs worked nice design fits nicely so overall for my experience a good purchase video also very clear on what process to follow.
They should include 4 protectors because I botched two of them, and the third cam out bubbly. That being said - watch the whole video before touching anything. Pay attention on what direction they pull the tabs from. Pay special attention to step 8. Those "anti-layers" are what makes installation perfect but very error prone.
If you line everything up from the first few steps you can't really mess anything up. You simple put the squeegee on the line and slowly wipe up while slowly removing the anti layers. Do it slow, without twisting or turning and it's good.
It's fking ridiculous can't even fking do it I fkt up the first try not even gonna attempt a second time through the shit in the trash gonna buy a solid screen protector that I just need to slap on
Kind of a big headache; had to try installing it twice because there was a faint line in the middle of the screen. But pretty good if you follow the instructions. ☺︎︎
Worked great for me on my Samsung Galaxy S10, Mous phone case. The step where you pull off the half pieces of plastic gets rid of any bubbles you could not remove from the first step. Edge to edge alignment is critical with the Mous case, or one edge will not seat well.
The process for applying it is good, but 8 months after affixing it, my first screen protector got a small hole and then began bubbling up due to humidity. I had to discard it. Thankfully, a second screen protector is included with the kit.
It may have seemed like a lot of steps but it actually wasn’t that long and it fit perfectly! I found that i still had spare screen protectors and wanted to change mine since my sis had bitten my phone and there were a dent ;-; Also i dropped a hairdryer on my phone. (This is really random lol)
first try went great, i used it for a long while, but finally decided to swap it because the edges pealing up finally annoyed me enough (potentially just a consequence of a curved screen edge and not the screen protector, though) second try just now the install went exactly the same, but i got the line in the middle that other comments are talking about. god i hope that goes away with use :/
I have two phones....the first one was perfectly installed ..the second one, I dropped the # 3 tab after pulling up on it..now I have a small line of bubbles down the center of the phone at the "starting line". Any suggestions on how to remove them? ahhhhh halp
Did anyone else screw up the first protector cuz you were like "pssshhh, I got this... wait what the hell? Crap... Fine, I'll follow the instructions... Oh, wow!"
tab 2 instructions would have worked if the tab didn't come completely off as you lifted it. having the tab in your hands, does not make the thing easier.
Not a very good video. #1. The black foam thing, they didn't warn us that it would really leave a mess behind on the desk we apply it too. That should be in the video. #2. When pealing off #4 TAB, *go very very slow and very very gently and evenly* , otherwise it might create a crease. It did on mine, because it pulled up the protective layer. I was able to smooth it out a bit, but still can see a thin line. I can see why Domeglass is so expensive and worth it (used it three times). Because it works great.
Like an olympic skier teaching new skiiers in 4 easy steps: buckle skis...put on goggles...grab poles....go!!! There need to be about 2 extra explanations about what's supposed to happen before Tab 2 and end of Tab 4. Totally wasted set 2 of shield and about 1/2 hour! 🤬
This doesn't look anything like I what I received and I failed both attempts trying to put it on. I ended up throwing everything away. This is garbage.
Thank you Amazon for these Chinese goods that don't work at all.... Also this video is a reupload so it seems I am not the only one with issues. Nice one, LK for your convoluted, cheap piece of flimsy plastic. Waste of time and money. If someone sees this, box everything up and get a refund
![LK [Flexible TPU] Screen Protector + [Alignment Tray] for Phone](http://i.ytimg.com/vi/8M1DhzfrTis/mqdefault.jpg)
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
This is absolutely BRILLIANT!!!! Thee best design and thee best video and I am a 67 year old woman who isd getting worse at doing things and my phone protector is perfect, just perfect and the phone looks like new. I would recommend this to anybody.
Works marvelously, did the first one 1 year ago, redid this year, and looks great!
This is actually a pretty good design. You can align the protector before actually installing it, the #2 and 3 film tabs effectively remove any remaining dust on the screen and you get a good, bubble-free install. It's a bit of a convoluted process, but the results are better than most plastic screen protectors out there.
Holy crap! That was great. Followed the step-by-step and came out with a screen that has no bubbles underneath. It came out better than the ones the guys did at the phone store for me. Like someone said, it is a bit convoluted, but it ends with really good results.
Honestly one of the better install videos, it's good that they specify that the green markings are to show a layer underneath that peels up
Happy I read the comments. As confusing as it is, it’s definitely a quality screen protector. You don’t even notice it’s there and feels pretty good. Can’t say durability as it hasn’t been on for a while.
Screen protector is amazing, it's thin and barely visible, application is easy (if you have a few small bubbles left when using the squeegee it's fine. Absolutely worth it!
Wasted two like a dumbass because I thought I could do it just by following the paper instructions.
...Third time's the charm!
I made same mistake with first one. LOL
@@kristiwaski8418 c
Really the best of all, product and video!!!
Great product, applied perfectly on the first try. Really thoughtful design. After removal of the first layer it is easy to readjust the film as many times as needed until it is aligned perfectly without worrying about bubbles - they will go away as you peel layers 2 and 3 like it is done in the video.
😅11😊❤🎉😂
Just fitted mine good job it came with more than one screen as the tabs on first attempt just pulled off instead of pulling the plastic on second attempt no issues tabs worked nice design fits nicely so overall for my experience a good purchase video also very clear on what process to follow.
Be sure to get a case that does not peel up the screen protector off of the curved edges! I usually get about 3-4 months or so for each protector.
Complicated but thorough and very clean, bubble-free process. Looks like there's no screen protector on which is great
They should include 4 protectors because I botched two of them, and the third cam out bubbly. That being said - watch the whole video before touching anything. Pay attention on what direction they pull the tabs from.
Pay special attention to step 8. Those "anti-layers" are what makes installation perfect but very error prone.
If you line everything up from the first few steps you can't really mess anything up. You simple put the squeegee on the line and slowly wipe up while slowly removing the anti layers. Do it slow, without twisting or turning and it's good.
It's fking ridiculous can't even fking do it I fkt up the first try not even gonna attempt a second time through the shit in the trash gonna buy a solid screen protector that I just need to slap on
one of the best screen protectors I've used
Worked well for me! clarity and finger print reader work fine on the Oneplus 7 pro
This is very well done. Both the video and the screen protector itself
really good tutorial, is there any utility for the guide sticker ?
Great instructions and supplies! Got it on my first try! Glad it was bundled with 3 protectors for backups!
Kind of a big headache; had to try installing it twice because there was a faint line in the middle of the screen. But pretty good if you follow the instructions. ☺︎︎
had to use two, both tries still had bubbles afterwards. i'll deal with it until I get annoyed and try the third.
Worked great for me on my Samsung Galaxy S10, Mous phone case. The step where you pull off the half pieces of plastic gets rid of any bubbles you could not remove from the first step. Edge to edge alignment is critical with the Mous case, or one edge will not seat well.
The process for applying it is good, but 8 months after affixing it, my first screen protector got a small hole and then began bubbling up due to humidity. I had to discard it. Thankfully, a second screen protector is included with the kit.
Best screen protectors you can get. Always install well and cheap.
Tried for an hour and used all of my protectors, the bubbles do not leave at all, ive tried everything and they just dont leave (s10)
Very brilliant instructions. Applied on successfully straight away. 👍
Funktioniert leider gar nicht, da ich die aufgeführten Teile gar nicht im Lieferumfang habe
It may have seemed like a lot of steps but it actually wasn’t that long and it fit perfectly!
I found that i still had spare screen protectors and wanted to change mine since my sis had bitten my phone and there were a dent ;-;
Also i dropped a hairdryer on my phone. (This is really random lol)
first try went great, i used it for a long while, but finally decided to swap it because the edges pealing up finally annoyed me enough (potentially just a consequence of a curved screen edge and not the screen protector, though)
second try just now the install went exactly the same, but i got the line in the middle that other comments are talking about. god i hope that goes away with use :/
I have two phones....the first one was perfectly installed ..the second one, I dropped the # 3 tab after pulling up on it..now I have a small line of bubbles down the center of the phone at the "starting line". Any suggestions on how to remove them? ahhhhh halp
Nevermind, kept using the squeegie for like 20 minutes and it disappeared. Deff will use these again. Way easier than the other spray brand I bought.
Doesn't really work when you send the wrong screen protector, does it? 🙄
Wrong for Samsung S10, tabs are incorrect on film, no instructions for the projector I have
Seems like a ton of steps but it went fast and the end result for my Galaxy S10 was great!
Did anyone else screw up the first protector cuz you were like "pssshhh, I got this... wait what the hell? Crap... Fine, I'll follow the instructions... Oh, wow!"
My screen protecters didn’t have 3 an 4 tabs 2 and 3 were one unit.
Very easy to install when you follow the instructions. Perfect!
U call that easy? Fking bs
tab 2 instructions would have worked if the tab didn't come completely off as you lifted it. having the tab in your hands, does not make the thing easier.
Do everything exactly like this but also ignore everything that doesn't apply.
My dumbass did it without watching the video but it came out nice!
Worked perfectly first time, thanks.
that didn't work at all
Not a very good video. #1. The black foam thing, they didn't warn us that it would really leave a mess behind on the desk we apply it too. That should be in the video. #2. When pealing off #4 TAB, *go very very slow and very very gently and evenly* , otherwise it might create a crease. It did on mine, because it pulled up the protective layer. I was able to smooth it out a bit, but still can see a thin line. I can see why Domeglass is so expensive and worth it (used it three times). Because it works great.
I didn't see a squeegee in mine :/
Useless If trying to apply to Google Pixel 7 pro Version. Dont recommend
Like an olympic skier teaching new skiiers in 4 easy steps: buckle skis...put on goggles...grab poles....go!!!
There need to be about 2 extra explanations about what's supposed to happen before Tab 2 and end of Tab 4.
Totally wasted set 2 of shield and about 1/2 hour! 🤬
Well this made me feel like an idiot
3 wasted
That was very complicated. I think I prefer a cracked screen.
Complicated but if you align it properly in the first few steps. It's almost impossible to mess up. And no bubbles.
Most unnecessary screen protector on the market. What happening to peeling a single layer and putting it on
This doesn't look anything like I what I received and I failed both attempts trying to put it on. I ended up throwing everything away. This is garbage.
Garcia Thomas Moore Brian Wilson Jessica
garbage sending mine back to amazon
Am i stupid, or did anyone else break 3 whole screen protectors while attempting this?
I got a refund BTW
I also didn't get any of those sticky foam things in my package :\
alle 3 Gerissen ganz große scheiße die ihr verkauft
HORRIBLE unnecessarily complicated. Too much work further screen protector cheap quality. 👎👎
there is a line at the middle of the film once you're done.. what a piece of crap. never buying this junk again
FU
C'est de la merde
Thank you Amazon for these Chinese goods that don't work at all....
Also this video is a reupload so it seems I am not the only one with issues. Nice one, LK for your convoluted, cheap piece of flimsy plastic. Waste of time and money. If someone sees this, box everything up and get a refund
Complete waste of money makes no sense way too complicated and why are mine yellow? This is stupid