INSTALLATION OF HALF HP PUMP | INSTALLATION OF 0.5 HP MONOBLOCK ELECTRIC WATER PUMP | PRACTOTECH #51
HTML-код
- Опубликовано: 5 сен 2024
- LIST OF MATERIALS:
At delivery flange
PVC 32mm MTA (Male Threaded Adapter) - thread size 1"
PTFE Thread seal tape (Teflon tape)
Solvent cement to fuse CPVC material (Adhesive sealent)
1" PVC pipe - 4 no's
PVC 32mm Tee - 1 no
PVC 32mm FTA (Female Threaded Adapter) - 2 no's
PVC 32mm Ball Valve - 1 no
PVC 32mm Hose nipple - 1 no
1" threaded end cap - 1 no
At Suction side
GI 25mm Male connector hose nipple with MTP (Male Threaded Pipe)
1" PVC Flexible spiral ribbed suction hose pipe
Flexible hose clamp
GI male connector nipple
Non return check valve (Foot valve)
1 sq mm, 3 core, 5 Amps cable for 0.5HP pump
Crompton 0.5HP 50 Water Pump
amzn.to/3NyXPzZ
Water Pipe for Gardening Hose Pipe Green Color Water Pipe 30 M Suction Pipe Garden (1 inch)
amzn.to/3mpP0fR
This video demonstrates the installation of a half HP (0.37 KW), 1 phase, 220V AC, monoblock electric water pump.
Installation procedure
a) Unpack the pump from the box
b) Remove the flange covers (end caps) from suction and delivery flanges. (Suction and delivery flanges packing will be sealed in the new pumps to avoid the entry of dust, dirt and gravels. If it is closed, we have to carefully cut and remove the flange packing using sharp edge paper cutting knife before installation.)
Installation procedure at delivery end
1) Take a PVC 32mm MTA (Male Threaded Adapter-Thread size 1 inch) and fasten it to the pump
2) Use Teflon tape on the threaded portion. (PTFE thread seal tape is a polytetrafluoroethylene is commonly used in plumbing for sealing pipe threads. Teflon tape lubricates allowing for a deeper seating of the threads and it helps prevent the threads from seizing when being unscrewed)
3) Cut 1 inch PVC pipe to a length of 2.5 inches. May need around 4 no’s it’s better to cut and keep it ready for the use.
4) Make use of solvent cement to join PVC: Solvent cement fuses the CPVC material together; creating one uniformly bonded piece of thermoplastic
5) Apply cement solvent before fixing PVC 32mm TEE
6) Fix 1 inch PVC pipe
7) Take PVC 32mm FTA (Female Threaded Adapter) and connect it to the TEE
8) Now, fix PVC 32mm ball valve to one end of the TEE: A ball valve is a shut off valve that controls the flow of a liquid by means of a rotary ball having a bore. By rotating the ball a quarter turn, i.e 90 degree around its axis, the flow is blocked.
9) Again will fix a 1 inch PVC to Ball valve to fit one more FTA
10) Will use a PVC 32mm hose nipple to fix PVC spiral ribbed, flexible suction hose/pipe
11) Will screw up an end cap for the FTA for priming. Priming: Prime the pumpset before starting. Priming means taking out the air present in the suction pipe and volute casing by filling them with water.
12) Repriming is easier if the gate valve is closed before stopping the pumpset as the water is retained in the delivery pipe line.
Installation at delivery end
1) To ensure water tight seal it’s better to use GI 25mm male connector hose nipple with MTP (Male Pipe Threaded) at suction side instead of PVC hose nipples.
2) Heat the GI male connector and insert the PVC spiral ribbed, flexible suction hose/pipe
3) Ensure that the Hose clamp is firmly air tightened
4) Other end of the suction hose pipe to be fitted with GI male connector nipple before fixing the foot valve.
5) Put Teflon tape to ensure air tightness between foot valve and male connector
6) Fit a foot valve vertically at the bottom of the suction pipe.
7) May cover the foot valve with cotton cloth to avoid clogging of FV by foreign materials
8) Drop the suction pipe inside the well and have ensured that the FV is sufficiently submerged in water all the time during operation.
There must be a clearance of at least 0.5M gap between the PV and the surrounding walls as well as the bottom of the well
Maximum possible suction lift is 6 meters (20 feet) but it is preferable to keep less than 4.5 mts.
Can use 1 sq mm, 3 core cable for standard 0.5 HP (4 amps) pump
Note:
a) Background music used in the video is “Doctor_Momentum” and “A New Beginning - Esther Abrami” which is provided by “No copy right sounds”.
b) Few of the images / pictures used in the video are taken from the Google and purely belong to the respected owners and not to me.
c) The purpose of using relative pictures is purely for education purpose and are not used with any other intention.
d) Science theory, working principle and few descriptions used in the video is taken from Google for education purpose. Purpose of making this constructive video and uploading in RUclips is to share knowledge.