half way to finish my work , the printer runs out of ink , for 20 minutes i've tried but didn't work . your video real quick real simple and helps a lot 🌸👍💚 keep it up Cheers
Thank you. I was feeling like an idiot how to access the black cartridge, and this video made me realize it has to be plugged in. I was trying to do it unplugged!
I have something weird to report - I had a color cartridge that still had ink and the black had run out of ink. So I got a new 2 pack with Color and Black ink. Installed only the Black ink while keeping my old Color ink cartridge in the Canon PIXMA TS3300 printer. The printer threw a E15 error. Cleaning the cartridge and its enclosure didn't help but the moment I installed the new Color ink cartridge, the error magically disappeared and the printer started to work again! Very cheeky Canon! :-X
thank you so much your instructions where clear and easy to follow made it a lot quick to do. will definitely recommend this to any cannon printer users.
I dont have a manual for my canon printer. I need to start with the basics. I would like to know how I find out what type of canon printer (mg420 I think) I also want to know how to hook it to my wifi and android phone. Thanks PLEASE HELP
What do you do with the flappy tabs the video in the instruction manual says a big x saying don’t take them off but every video I see I can’t see the tabs! Do you take them off?
What if the ink cartridge holders don't move so you can change the ink? They're on the left side of the printer and won't move to the center so I can see them?
Help please! The cartridges don't stop in the middle for accessing. They go back to their original position. Is there a fault with my printer? I've unplugged it and re-plugged it in and that made no difference.
Hello thank for this tuto, I refilled my ts3150 black cartridge after B light is on, now it doesn't work anymore, no black printing, it's my first with compatible ink refilling. Is there any maner to reset cartridges or their levels ? Thanks for your help, best regards. BoB
I was printing some docs.. Then I need to change ink.. I open the front the printer but the cartridge did not show up.. What to do then? I still stuff to print for this don't want to cancel my listing 😵
I replaced a cartridge the other day. Was printing perfectly and the next day when I turned the printer back on, it gave a E15 error message. I've cleaned out the flim with alcohol until it was clean. But still I recieve the same error. How do I solve this matter?
And it must be noted, don't touch the chip on the outside, if you get your finger oil salts and sweats on it your printer may not respond as well, if you do accidentally touch it, wipe it off with a dust free dry cloth
Imagine a world where I didn't have to look this up because I was taught this in my decade of schooling.
Thank you. This was perfect.
Thank you my man, I spent 40mn like a dummy without any succes. This video is straight to the point, thank you 🙏
The thing for the ink keeps moving and is in either conor not were it needs to be
Thank youu, I didnt know how to and I didnt want to break it 😅
Me too
Same😅
I thought I was gonna break it looking for the ink😹
Same
SAME!
Very helpful, I return to this every time I change cartridges. Thanks!
This 80 year old woman thanks you deeply!
half way to finish my work , the printer runs out of ink , for 20 minutes i've tried but didn't work .
your video real quick real simple and helps a lot
🌸👍💚 keep it up
Cheers
beautifully explained, as someone who struggles with understanding properly without needing to be shown thrice, this was easy to follow
Thank you. I was feeling like an idiot how to access the black cartridge, and this video made me realize it has to be plugged in. I was trying to do it unplugged!
I have the feeling this video was made for me. I have an Canon Pixma TS3150, and this is exactly what I needed to know right now. Thank you.
I have something weird to report - I had a color cartridge that still had ink and the black had run out of ink. So I got a new 2 pack with Color and Black ink. Installed only the Black ink while keeping my old Color ink cartridge in the Canon PIXMA TS3300 printer. The printer threw a E15 error. Cleaning the cartridge and its enclosure didn't help but the moment I installed the new Color ink cartridge, the error magically disappeared and the printer started to work again! Very cheeky Canon! :-X
thankyou, I had no idea how to do this and your instructions were very clear
Thousand thanks for your kind effort, very informative tutorial.
im so glad that there are people that more than we do because otherwise i would probably break the printer.😅😂and he was a great explaining it too .👍
Quick, clear and useful. Thank you!
thank you so much your instructions where clear and easy to follow made it a lot quick to do. will definitely recommend this to any cannon printer users.
First time changing a cartridge, thanks a lot
Thank you! You made this so very easy 😀
Thank you for the video. It was very helpful.
Thank you so much! This really helped me figure out what I was supposed to do!
Quick, helpful, to-the-point. BAM! Thank you so much for this tutorial! I've saved it in case I need to come back to it later.
Thank you so much. Your instruction is very clear and easy to follow. Thanks thanks.🙂
Thanks, Completed it in 2 mins
Much appreciated! Love the lil' penguin too, good stuff all around! :)
Thank you, this was quite useful. I remember installing it when I first got the printer but I forgot the process!
Thank you for showing me, very helpful 😊
i did already know this - BUT when i open the door to the cartridges they remain tucked into the housing on the left. how do i get them to appear?
You should turn on the printer so it shows the 0 on the display, like at the end of the video.
My problem too
Yeah same, so I have to pull them to get access. I think it’s because our version of the printer is different
Mine too
I just pulled them out they just slide out
THANKS! so simple when you know where and what and how!!
Thank you for the tutorial. It really help me. 👍
A quick easy demonstration!
Easy when you know-how, thank you for this video, very much appreciated!
You're my life savior!!! ❤️
thank you for a quick and easy demo
thanks bro!
Thank you very much it was clear and useful to me😗
Thank you so much for this, appreciate it.
Thank you buddie....its so helpful.
Thank you this instruction works for TS 3420 as well.
Very good instructions clear and precise make a very easy job
This video helped me thank you
Thank you! Straight to the point👍
Thank you very much for proper instruction
Thank you! It does great help.
Thank you soooooooooo much for the info!!
Thanks it helps a lot ❤
Thank you 🙏🙏🙏 You saved me today 🙏🙏
Thank you kind sir I was scared to ask my mom for help 💀
helped so much thank you
defo leave a like
Thank you, quick and easy..
Straight forward explanation easy Peasy
Thnx. So helpful
yay it worked thankyou!!
thank you! you saved my life!
So useful. Thank you👏🏾👏🏾👏🏾
Thanks was very helpful and easy
Thanks for the help! 👍☺️
Very helpful
I dont have a manual for my canon printer. I need to start with the basics. I would like to know how I find out what type of canon printer (mg420 I think) I also want to know how to hook it to my wifi and android phone. Thanks PLEASE HELP
my cartridges dont go in the middle when you open the draw they are at the side what should I do?
My cartridge do not come in the middle
it has to be switched on when you open that door on it
You can also press a button behind them and you can slide them over
Hope this helps, (even though these comments were months ago) lol
Turn off and unplug for 10 seconds. I had same issue and thats what worked for me.
Thank you for helping me 🙏
Awesome thanks for this info 👍👍👍👍
Perfect, thanks!
Very helpful. Thanks. 👍
Thanks so much! Perfect and easy instructions!!
Awesome, thank you
Thanks bro!!
A million thanks :-)
Thank you very much right way❤
God bless u sir
Great help thank you
Thank you!
What do you do with the flappy tabs the video in the instruction manual says a big x saying don’t take them off but every video I see I can’t see the tabs! Do you take them off?
Very good
Thanks 🙏🏽
What if the ink cartridge holders don't move so you can change the ink? They're on the left side of the printer and won't move to the center so I can see them?
Soo helpful
thanks so much
Help please! The cartridges don't stop in the middle for accessing. They go back to their original position. Is there a fault with my printer? I've unplugged it and re-plugged it in and that made no difference.
Thanks!
thank you
Hello thank for this tuto, I refilled my ts3150 black cartridge after B light is on, now it doesn't work anymore, no black printing, it's my first with compatible ink refilling. Is there any maner to reset cartridges or their levels ? Thanks for your help, best regards. BoB
THANK YOU SOOOOO MUTCHHH
I get an orange ‘still ‘ light after I have renewed my inks. How to stop it?
I was wondering if all cartridges are the same? I think I ordered the wrong one. I might need a fine cartridge.
I was printing some docs.. Then I need to change ink.. I open the front the printer but the cartridge did not show up.. What to do then? I still stuff to print for this don't want to cancel my listing 😵
I replaced a cartridge the other day. Was printing perfectly and the next day when I turned the printer back on, it gave a E15 error message. I've cleaned out the flim with alcohol until it was clean. But still I recieve the same error. How do I solve this matter?
Thank you! :)
Can I use a single cartridge printer?
Luv broski
THANK YOU
Guys how does the cover shut after installation.. mine won't shut 👍 thank you is there a reset option
what is the best was to do double sided printing with this printer?
Once I put them in I got an error code that says 168A and it's saying that they're not in properly
Thanks bro
could you also only use 1 ink cartridge
should i have it turned on or off when i do this
thanks from pat in ct
Thank you so much...I was panicking
Thanks
And it must be noted, don't touch the chip on the outside, if you get your finger oil salts and sweats on it your printer may not respond as well, if you do accidentally touch it, wipe it off with a dust free dry cloth
What if it doesn’t move when you open the door? How to I fix that