Lil tip. Install the screws behind the hinges. The painter will not remove those keeping the frame secure and saving you a trip. Thank you for the video 👍👍
I've got 23+ years of residential remodeling experience. That said, it is always such a pleasure to watch a master carpenter, who seems like a great guy, make it look so easy. Very enjoyable and helpful. thank you men.
This was the most helpful installation video for double doors that we've encountered, watched it thru several times and referred back to it while putting up our own doors. Can't thank you enough!
WOW !! I am super impressed with your process for installing those doors. Using the actual doors to help install. I can tell you've successfully installed a few doors in your time. Thank you !!
Excellent process, wish I would have found this before hanging the other closet doors. My wife's closet doors now have much better alignment than mine. Saved me from mistakes due to uneven floor.
Good video. I have made doors for my home. Did one set of closet double doors because I hated the bifold door that was there. Still doesn't line up perfectly and it is about a quarter inch off at the bottom. A few more shims should get the doors to line up right. I am also doing a second closet with latch bolts at top and bottom to make a secure closet for storing things I don't want ''mice'' to easily get to.
A way to stop a door from opening on its own or swinging close is…….take the pins out and hit the side of them with a hammer and bend the pin slightly. That’s it…if you need more put a larger slight bend in it or do the other hinge or hinges.
The "host" should watch old episodes of This Old House with Bob Vila to learn how NOT to host. When you've got an expert in the room, don't interrupt. Just let him teach us what he knows. I couldn't make it past minute 3.
These tutorial is simply not sufficient here in Australia the system is completely different. As the hinges need to be measured either three or four on equally proportional spaces before even thinking of the set up of Jambs let me alone all the furniture required on both doors let alone rebating both doors with a plunge router.
Rough openings are never plumb, walls are never plumb beat out drywall all the time and kick the legs to make the door bottoms even, more work than shown. But nice. Should show what a mess the framers give you, not so easy
Best and most comprehensive double door installation on RUclips! Well done! 👍😊
Lil tip. Install the screws behind the hinges. The painter will not remove those keeping the frame secure and saving you a trip.
Thank you for the video 👍👍
Best video by far on installing a door with explanations on how and why. Cool to see masters at their trade. Thanks for posting.
I've got 23+ years of residential remodeling experience. That said, it is always such a pleasure to watch a master carpenter, who seems like a great guy, make it look so easy. Very enjoyable and helpful. thank you men.
By far the best double door install I've seen. Great video!!
a trick: you can watch series at flixzone. I've been using it for watching lots of of movies these days.
@Lian Javier definitely, been using Flixzone} for years myself :D
Awesome video.... I wished I watched this before I started installing my new French doors. It would've saved me a lot of time.
This was the most helpful installation video for double doors that we've encountered, watched it thru several times and referred back to it while putting up our own doors. Can't thank you enough!
WOW !!
I am super impressed with your process for installing those doors. Using the actual doors to help install.
I can tell you've successfully installed a few doors in your time.
Thank you !!
Excellent process, wish I would have found this before hanging the other closet doors. My wife's closet doors now have much better alignment than mine. Saved me from mistakes due to uneven floor.
Best video ever on installing these doors by far
SOOOO WIsh I had watched this earlier... Best video I have seen to do this properly.
Brilliant. Very helpful. Thank you for making this video.
He did make it look easy lol here I go try agin. Wish me luck.
Good video. I have made doors for my home. Did one set of closet double doors because I hated the bifold door that was there. Still doesn't line up perfectly and it is about a quarter inch off at the bottom. A few more shims should get the doors to line up right.
I am also doing a second closet with latch bolts at top and bottom to make a secure closet for storing things I don't want ''mice'' to easily get to.
Excellent presentation!!
Great video
Great tips guys, very professional ;)
Thanks!
Great video! Thanks
Good video but your helper is better off keeping quiet 🤐
Awesome
A way to stop a door from opening on its own or swinging close is…….take the pins out and hit the side of them with a hammer and bend the pin slightly.
That’s it…if you need more put a larger slight bend in it or do the other hinge or hinges.
thx
The "host" should watch old episodes of This Old House with Bob Vila to learn how NOT to host. When you've got an expert in the room, don't interrupt. Just let him teach us what he knows. I couldn't make it past minute 3.
Someone ripped a fart at 9:58
These tutorial is simply not sufficient here in Australia the system is completely different. As the hinges need to be measured either three or four on equally proportional spaces before even thinking of the set up of Jambs let me alone all the furniture required on both doors let alone rebating both doors with a plunge router.
I guess these days time is money. No time to do a traditional build of setting up like the old days with french doors.
Rough openings are never plumb, walls are never plumb beat out drywall all the time and kick the legs to make the door bottoms even, more work than shown. But nice. Should show what a mess the framers give you, not so easy