Panel view plus 600(PV+600) communication with Micrologix 1200 Via DF1 Protocol

Поделиться
HTML-код
  • Опубликовано: 14 дек 2024

Комментарии • 18

  • @ucduypham9338
    @ucduypham9338 5 лет назад

    Thank you for support .^^

  • @jakesneed3146
    @jakesneed3146 3 года назад

    I’m trying to set up a panel view with serial port comms to the PLC. All our other machines use Ethernet to communicate but there’s always that one odd ball. In the PV settings how do I set up the communications? I can not know how to set up using Ethernet. Thanks

  • @JuanPabloGalvanCabrera
    @JuanPabloGalvanCabrera Год назад

    WHAT IS YOUR CABLE CONFIGURATION TO MAKE DF1 COMMUNICATION?

  • @JESUSHERNANDEZ-ey6xd
    @JESUSHERNANDEZ-ey6xd 4 года назад

    Excuse, do you have configuration in order to make the serial cable to connect the PLC Allen Bradley?

  • @Alanvidaloka
    @Alanvidaloka 5 лет назад

    Where can i get the programm? I m seeking a lot for a link, but i couldnt find yet.

  • @cesarc2535
    @cesarc2535 5 лет назад

    Me comparte informacion de intalacion logix 5000 v13...v 20.03
    . Por favor

  • @juanpablogalvan6112
    @juanpablogalvan6112 4 года назад

    Hello, I have a panelview plus 600 and it has firmware 5.10.09, my question is: can I program the panel with the version that you use in your video? I would appreciate it very much if you could help me with this friend.

    • @EASYPLCTRAINING
      @EASYPLCTRAINING  4 года назад +1

      Yes you can program same way .... but you have to check first if FTview software you have installed supports this firmware..... I think FTVIEW 9.0 will work fine

    • @juanpablogalvan6112
      @juanpablogalvan6112 4 года назад

      @@EASYPLCTRAINING
      I think that FTview v9 does have that firmware, but it does not have the plc that I have, it is a 1769 L32E, in this case which ftview software will be suitable for my panel and the plc?

    • @EASYPLCTRAINING
      @EASYPLCTRAINING  4 года назад

      Oh in this case you have to use rs studio 5000 v 30 it is a combination of hmi and plc programming ..... same like tia portal in siemens

    • @juanpablogalvan6112
      @juanpablogalvan6112 4 года назад

      @@EASYPLCTRAINING
      In the Rockwell automation compatibility table it mentions that my PLC is not compatible with versions greater than v20, I don't know what to do buddy 😢

    • @EASYPLCTRAINING
      @EASYPLCTRAINING  4 года назад +1

      That's not good news .... any way try to upgrade the firmware of this hmi .... you can search on google how to upgrade firmware for hmi ..... I think once I have upgraded firmware for Plc .... please check if it is possible to upgrade firmware for hmi

  • @robertofloresmacias6195
    @robertofloresmacias6195 5 лет назад

    Me puede compartir el pin Out del cable de comunicacion.

  • @cesarc2535
    @cesarc2535 5 лет назад

    Hola easy plc ...me di cuenta que le cerraron el otro canal que tenia donde enseñaba a instalar los programas factory talk .. me gustaria tener su contacto para asi pedirle ayuda con el programa que me falta ( logix 5000 v13 a v20 .
    Saludos cordiales

  • @tanachaiphoset3451
    @tanachaiphoset3451 4 года назад

    Please show cable wiring for me make by myself. Thanks.