Pirate cutlass part 3: Milling & filling
HTML-код
- Опубликовано: 15 сен 2024
- Forging my first sword, a Pirate cutlass!! from a truck leaf spring, this is Part 3 of this series, in this episode, we take the guard and mill it off flat and put a slot in for the tang, we also clean up our tang area and file it to final dimensions. and a side project of making a cushion top for my shop stool.
The tools I use in this video are many but the ones mentioned are the power hammer by Zeiglar and the Belt Grinder by TS Project
I'm open to sponsorship of videos please get in contact via Facebook
Carbide faced file guides - these are very expensive you may need to shop around
UK: amzn.to/2UPEVim
US: amzn.to/3zgDY1z
alecsteeleshop...
the gloves I use when forging:
UK: amzn.to/2UN5wws
US: amzn.to/3gx6kNz
Devil Forge: a good starter forge and one I use for heat treat, was my first forge:
UK: amzn.to/3zaGKVX
US: amzn.to/2WqPARb
if you want a hammer to start off with get a demolition hammer like this one and round off the edges:
UK: amzn.to/3Bas7mg
US: amzn.to/3guZeck
Grinding Gloves are Dewalt work gloves
UK: amzn.to/3sORUgS
US: amzn.to/38aUe8f
Clauss Auto Blade loading utility knife
UK: amzn.to/3kqqQ3p
US: amzn.to/3gtmszO (different make, same design)
2" x 72" grinding belt 36 grit ceramic:
UK amzn.to/3B6ubvm
US: amzn.to/3sOfieb
2" x 72" grinding belt 60 grit :
UK: amzn.to/3yhPqbP
US: amzn.to/3DdppOD
2" x 72" grinding belt 120 grit :
UK: amzn.to/3gvIPEG
US: amzn.to/3BbeT8A
2" x 72" grinding belt 320 grit :
UK: amzn.to/3jfgzb7
US: amzn.to/3kqMKE1
Back for Part 3. Should probably binge these, but am enjoying absorbing each one slowly. 🐌
you dont have to binge it, just enjoy it ;-)
Looking good!
Thanks!