SolidWorks Tutorial
HTML-код
- Опубликовано: 11 сен 2024
- sw-tc.net/ solidworks tutorial bike saddle. Bike project playlist: • Bike Project
►SolidWorks Learning course (voice):► • SolidWorks Complete Le...
►SolidWorks Sheet Metal Lectures► • SolidWorks Sheet Metal...
►Our Playlists:► / sw-tcnet
►Our Website:►www.SW-TC.net
►Our channel :► / sw-tcnet
►Facebook:► / solidworks.tutorial.net
►Tutorials Engineer Channel: ► / @tutorialsengineer
►Engine1 Project :► • Project 10: V6 Engine
►Engine 2 will be completed on:► • Engine 2 project
►For more SolidWorks Tutorials: ► • SolidWorks Practical T...
►CATIA Complete Learning:► • CATIA Complete Learni...
►Inventor Complete Learning:► • AutoDesk Inventor Comp...
►SolidWorks Surface Lectures: ► • SolidWorks Surface Tut...
►Solidworks Sketch Tutorials: ► • SolidWorks SKETCH Tuto...
►SolidWorks Beginner Tutorials: ► • SolidWorks Complete Le...
►SolidWorks Sheet Metal Lectures► • SolidWorks Sheet Metal...
►SolidWorks Weldment Lectures:► • Playlist
►Available Playlists:► / sw-tcnet
►Learn Engineering Playlists:► / @tutorialsengineer
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
All dimensions are in mm/g/s/ISO - Based on true dimensioning.
---------------------------------------------------------------------------------------------
Rating, commenting, subscribing and sharing are always appreciated!!
----------------------------------------------------------------------------------------------
The uploading of tutorials is based on an accumulated studied plan!
----------------------------------------------------------------------------------------------
New to SolidWorks?! Recommended to watch my earlier uploads.
----------------------------------------------------------------------------------------------
I will be thankful to you for replying whom are in need.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Hello & Welcome to SolidWorks Tutorial Channel
This channel is dealing with EVERYTHING about SolidWorks aims to make the viewer a professional SolidWorks user! & to be helpful !
This Channel beside Tutorials Engineer contain topics about:
- SolidWorks Beginners Tutorials
- SolidWorks Sketching
- SolidWorks Surface
- SolidWorks Weldments
- SolidWorks Assembly
- SolidWorks Drawing
- SolidWorks Sheet Metal
- SolidWorks Mold Design
- SolidWorks Simulation
- SolidWorks Motion
And MORE
►►►SUBSCRIBE ?!◄◄◄
-------------------------------------------------------------------------------------------
GO PROFIST ...BE SOLIDWORKIST ◄ suggested words!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
----------------------------------------------------------------------------------------
★------ ۞ ART ۞ ENGINEERING ۞ CREATIVITY ۞ ------★
----------------------------------------------------------------------------------------
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Warm Thanks to them who supported and subscribed our channel in our very early start... All are nice but you are special!!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Viewers can contribute translated titles, descriptions, and subtitles/CC (with different languages)
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
OTHERS:
TO BE FILLED
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
■ if you feel want to give something in back : the minimum : Rate, comment, subscribe & share!!
As a Rhino User, I am always impressed by users who can create freeform models using Solidworks.
If anyone has issue's with "thicken surface".
This can happen if the mirrored shape of the saddle has too many harsh/sharp curves. This blocks "thicken surface" from working since the thickened surface would collide with itself.
Go to "evaluate" and "curvature" then check if any areas of the mirrored saddle are red (red meaning the curve of the saddles mirroring is too harsh/sharp in that specific spot).
If any red spots appear go to the first sketch and play around with the shape of it, attempting to make it as smooth as possible in the places that the red appeared. It may also help to play around with the many sketches made on planes 1-5, the goal is still to give the mirroring feature as smooth of a connection point as possible.
Then keep checking the entire mirrored saddle with "curvature" until it has no red spots on it.
After that the "thicken surface" feature should work.
If you're having a problem with the thicken part, just set all the end point angles to 0. i.e set the 5 & 3.5 degrees angles to 0. Then it will work.
no se quien eres pero te quiero
فعلت نفس طريقتك وايضا قمت بجعل السُمك ٠،٧ وضبط معي
This video explains a lot, thanks!
For anyone having problems with the thicken feature, try adding a fillet on the midline of the two surfaces. I tried a 12 mm fillet and then I could thicken the surface successfully.
Hi @WildrekGR, can you explain more about how to do it, thanks very much
Select the line that runs across the center of the seat (the line that is created after you mirror the surface) and add a fillet. Play around with the fillet radius, or the fillet method. It worked for me, good luck!
I CANT PASS THICKEN PARAMETER... IT DOSENT SHOWING MERGE RESULT OPTION... ANYONE GOT THE SAME PROBLEM...???
I had the same problem. I rebuilt the boundary surface a couple of times and then it finally worked and thickened ok but I don't understand why.
well, just used the lofted surface tool instead, same configuration, works fine (:
Why add the points for the Boundary surface? Thicken will not work with out these points. Plus the thicken feature works but at the ends of the saddle the end points of the solid is distorted. Unfortunate that this happens.
Could you please explain how I do to give thickness? I have mistakes with that? Why does that happen?
I apologize if I write badly but I do not speak English, I use the google translator.
Cool. Thanks.
Excellent!
Very nice video
Has anyone had a received the error "the sketch is not suitable to created projected curve. It has more than one open/closed profiles" when trying to project the curve for the rails? Thanks!
Could you please explain how I do to give thickness? I have mistakes with that? Why does that happen?
I apologize if I write badly but I do not speak English, I use the google translator.
the problem come to the sketch we make in right plane at the very beginning，you can change some contronl points of the spline to 0 degree instead of 5 degree, then you can get thickness
Very good!
Can you make a full solidworks tutorial on how to design a car aston martion vantage? Or bentley continental gt?
I never see that coming.
Yeah I have the same problem with thicken feature... It says rebuild error does anyone solved this problem??
boundary surface for 3 sided surfaces...bad idea
Update 2022***** do not follow this video, it does not work.
Very nice video