The method to use the axle and spacer to push out the first bearing is life changing for me! I then turn over the axle, mine has a rounded head, then turn over the wheel, cover the head of the axle with the bearing and push. Woala, bearing removed with a very little effort. In addition it's a safer way than pulling out the bearing using a skate tool to pray up the bearing. It might make a small dent in the bearing, it happened to me, so I wasn't happy with this method anymore. To my surprise, this is the method, everybody shows in the videos.
Hi, i can't loosen the wheel nuts to get the wheels off they're just turninng and turning but not moving in the slightest what on earth am i doing wrong?!! Does lefty loosey righty tighty apply on both sides on inlines wheels, im a quad skater and trying to get back wheel off to remove the brake on my wife's inlines please help! 😩
Thank you so much for this cause I have those same exact frames and I was totally confused..I was getting ready to buy a whole new frame with wheels on it
@@iRollerboothey been question what single axel frames do you recommend iv been skating doul axels for a few months now and im sick of using two tools to remove the wheels to clean the frames and wheels got any recommendations
How come my wheels feel like they have flatspots / are not centered ? It’s the second set of wheels I bought. Kinda annoying. Checked the video to make sure I haven’t overlooked anything. Did everything correct it seems. Anyone know if this issue ?
Awesome video. Could you possibly do one on how to make skates sound solid. I am having issues with my wheels moving around in my frames making them sound very clicky and cheap. Can't seem to find any tutorials or information. Keep up the good work 👍
Hello sir. I’m a new subscriber to your channel. I had a couple questions regarding the IQON AG60 frame on the AG10/20. Did you have a difficult time getting in the middle wheels? I have seen multiple RUclipsrs talking about how difficult it was. If so, are there any tips you could give me to make it easier? Thank you for any advice you can give me.
Unpopular opinion, if you don't have these tools, you can use your teeth 👍👍. Lol good angle Ben, everything was very easy to see and a breeze to follow.
if you don't want to dint the soft aluminum bearing spacer with a steel axle you can shove a 1/4 inch allen key through from one side, through the spacer and catch the inside lip of the furthest bearing, tap it, rotate and repeat until out, for the one left in the wheel I like to use a small spark plug socket upside down (so you're hitting the end that would go on the plug) tapped with a mallet. A lot of the time this isn't necessary but if they're stuck, get creative.
Straight and to the point, and simple..thanks for the video.
Funny you just did this video. I was struggling with some bearings yesterday lol
Thanks for the video, i was skating almost 6yrs without cleaning bearings really appreciate it
Im ordering the new intuition liner lmk if you want to do a review on it I still can't find a vid on RUclips about it
The method to use the axle and spacer to push out the first bearing is life changing for me! I then turn over the axle, mine has a rounded head, then turn over the wheel, cover the head of the axle with the bearing and push. Woala, bearing removed with a very little effort. In addition it's a safer way than pulling out the bearing using a skate tool to pray up the bearing. It might make a small dent in the bearing, it happened to me, so I wasn't happy with this method anymore. To my surprise, this is the method, everybody shows in the videos.
I haven't changed or rotated my wheels and bearings since I bought my Sway57s almost a year ago with regular skating. This will be used soon.
Hi, i can't loosen the wheel nuts to get the wheels off they're just turninng and turning but not moving in the slightest what on earth am i doing wrong?!! Does lefty loosey righty tighty apply on both sides on inlines wheels, im a quad skater and trying to get back wheel off to remove the brake on my wife's inlines
please help! 😩
Thank you so much for this cause I have those same exact frames and I was totally confused..I was getting ready to buy a whole new frame with wheels on it
Glad I could help!.
@@iRollerboothey been question what single axel frames do you recommend iv been skating doul axels for a few months now and im sick of using two tools to remove the wheels to clean the frames and wheels got any recommendations
On another note, someone asked in another video and I can't find the thread anymore; do you wear anything for hip/thigh protection?
Sometimes I wear a football girdle with soft padding on the hips, knees, and tailbone. Bought from the local sporting goods store.
do it with famus metal core wheels :'( I have some super wrecked bearings stuck in those metal cores!
😲I hadn't thought of that, I was going to buy some yesterday, glad I didnt
Very good video 👍
How come my wheels feel like they have flatspots / are not centered ? It’s the second set of wheels I bought. Kinda annoying. Checked the video to make sure I haven’t overlooked anything. Did everything correct it seems. Anyone know if this issue ?
Awesome video. Could you possibly do one on how to make skates sound solid. I am having issues with my wheels moving around in my frames making them sound very clicky and cheap. Can't seem to find any tutorials or information. Keep up the good work 👍
Hmmm. Good point. I’m not 100% sure, I’ll look into it. 🔥🔥
I have the same exact issue
Good stuff man, thanks
Will the Sonic pro tool work for changing wheels?
2:41 the coster looks like a harry potter face 🤣
Great vid!
My fila inline wheels doesn't have a loose middle piece it is just a solid tube all the way through are they permanent or can I remove them
You have 6mm axles. It’s a little trickier - but you can get started here : ruclips.net/video/TKiGTBgWiCo/видео.htmlsi=Mbe_4oU_S04bwyAO
Hello sir. I’m a new subscriber to your channel. I had a couple questions regarding the IQON AG60 frame on the AG10/20. Did you have a difficult time getting in the middle wheels? I have seen multiple RUclipsrs talking about how difficult it was. If so, are there any tips you could give me to make it easier? Thank you for any advice you can give me.
Unpopular opinion, if you don't have these tools, you can use your teeth 👍👍. Lol good angle Ben, everything was very easy to see and a breeze to follow.
Your teeth?
Well done. Thank you
Thank you
Mine is so damn hard to get out for some reason
Which wheel?
@@iRollerboot here’s the kind of in-line skate I use: flying eagle S5S+, 72mm 85A
❤️
I'm getting naked vibes from this video 😱
🤣🤣🤣
you need a bearing press
What’s that?
I need hair transplant. Pls donate some hair from your forearm. You are rich in natural resource there.
if you don't want to dint the soft aluminum bearing spacer with a steel axle you can shove a 1/4 inch allen key through from one side, through the spacer and catch the inside lip of the furthest bearing, tap it, rotate and repeat until out, for the one left in the wheel I like to use a small spark plug socket upside down (so you're hitting the end that would go on the plug) tapped with a mallet. A lot of the time this isn't necessary but if they're stuck, get creative.