PVC Window Sill Moulding Instalation How to DIY
HTML-код
- Опубликовано: 14 ноя 2020
- In this video you will see how to install the window sill correctly. It won’t take much knowledge.
You will need:
Windowsills
assembly foam
pairs of wooden beams.
I just want to share this idea and make it for fun. I hope you like it. Thank you for watching!! Please subscribe to get more interesting videos: 
Хобби
I'm so happy I found this video 🤣 where to start lol an inch of plasterboard and two inches of patchy foam holding it up. Great, just don't lean on it, or set anything on it, or close the window to hard. And just gives up on the cap end's 🤣 Imagine this bi walking on site lol
😂😂😂
I thought it was gonna be a professional job seeing everything taped up plus all the tools you'd expect to be used to get a nice square finish
AN Old bread knife work BEST for this job the more flexible the blade the better and the serrated edge is KEY. Trim happy from Scotland.
Like linkin park use to sing " In the end? It doesn't even matter" 😂
Thanks for posting!
Very easy method. Thank you
Thanks for this video, very helpful. What do you stick cover strips to an existing window frame with?
I used a no more nails type of adhesive, took the idea from the professionals fitting the rest of my windows
Should of allowed front edge to go past reveals on both sides
Much better look with extended ends.
Inside window part is stool, not sill. You got something on your thumb & hand. Cleans off with acetone.
Thank you, I was wondering if anyone besides myself knew the difference.
Super multumesc
Spot on
Usually people only upload How To videos if they actually know what they are doing. You clearly do not.
Why you thin so?
what can i stick at the end to cover the edges up? anyone have an idea what they are called?
window sill end caps
Hey man next time think about your window reveal before setting anything in place. luckily you didn't drive any nails to the sill so you can pull it out again and fix the uneven reveal :)
this is not how to do it
why PVC not wood ?
Old question but wood deforms over time and is high maintenance. No matter how good you are at carpenting any moisture will ruin your work. PVC comes in wood print nowadays and requires zero maintenance
Spoken words would be helpful.
You never ever fitted window boards
Sill is supposed to drain outside the building....
Sills are inside and outside.
@@woodinside Wrong, the sill is outside, the stool is inside.
The Uk we fit that to the outer frame and then either a flat wooden board with a bull nose edge or upvc window board to the inner , and always looks better if you leave the internal horns on and cut around the reveals so wraps around and doesn’t finish cut of square like that
Plastic is not easy rot
Your mom is so cute
Too cheap.
it is cheap, but in reality looks good