Awesome build, a little constructive criticism: turn your amperage up on your welder, if it's all the way up find a better power source, slow down a bit, take your time and feel what you're doing and pull and push that puddle and you'll get the hang of it, and remember, a grinder and sanding disks can perfect a mistake. I could see your progression tho and that's awesome. And when you're painting, remember it's all about prep, the cleaner the steel the better, get you some good primer, self etching is more perfered towards aluminum but works just as great for steel, 3 or 4 light coats of your color, and go balls out on some clear to seal it up and make it last. After your last coat of clear, this is the absolute hardest part but trust me it is worth it, do not touch it for at least 2 days. If you could wait a week that would be even better. Spray cans DON'T HAVE HARDENER so letting your paint cure 100% is good for it. Not saying you're not doing it right, you're doing an awesome job, I'm just sharing knowledge to maybe make your life a little less stressful. I'm OCD when it comes to fabrication I can't help it 😂
Thank you for the advice! The paint job on this one was crappy and turned out streaky. However, I have learned most of this the hard way with my other builds! This project was finished around summer 2018. Since then, I learned the whole painting process, I painted a bike, a scooter and took my car to a shop to have it painted. I have learned alot about paint work. I think in the future I will invest in a compressor and paint gun. I will start using 2k Clear in cans from now on. Still have lots more to perfect on a welder. Also, I use rustoluem filler primer in a can. Do you think self-etching primer would be better? I think you should check out my 79cc scoooter build part 2 too see my latest paint job. And my "how to weld flux core" video for my latest welding job. for an up to date view Thanks again!
You are a great inspiration on how you can do great things even if you aren’t the biggest RUclipsr or don’t have much to little sponsors! I have learned so much. You are the greatest RUclipsr under 100K subs! Thanks for all the things you learn and teach everyone who watches your videos!
Yeah awesome video and great go kart we just refurbished a vintage yellow Jacket go kart . It's like a brand new one now .We used a variable speed torque converter .it'll almost wheelie with a grown adult on it .. and it has a stock 212 on it we are asking $700 for it and we are building an adult two seater with a 440 and reverse next we will ask 1700 for that one . Keep it up 😁👍
man ive been lookin for that exact frame style forever ...i dont know what its called but i ad it wen i was a kid...thats a vintage body style .. a classic
That's cool! I built a two seater for me and my grandson! HE loves to ride on it I put a STAGE 1 kit in the 212cc motor! It runs about 42 mph! It's fun
You have fixed up one of the most rad simplest carts going. You could top it off though with a set of nerf bars with plastic bumpers on each side. It will save you on the track from being bumped off by another kart. Heat a piece of 4 inch ABS pipe with a propane torch and flatten it so it is oval shaped and make your nerfs so that when you add the plastic pipe bumper to the nerf it will be in line with the outside of the wheels. All doable on the cheap.
It is awesome!only a few tips: the exhaust should be fixed in order to have less vibrations, when you weld you should strip the paint around the area you are welding so you have a good weld integrity,and lastly you should also paint the frame with a coat of primer before applying the red colour,the clear coat is also a good Idea after the red paint
Found your channel through "RBG" just subscribed! Awesome content bro. You're bmx bike project has inspired me to get back out into my garage to build again!!! Thanks youngster! Brrraaaaap!
I grew up with a red go kart like exactly like that it was bad ass I use to ride it everywhere I could walk off on a quad with my go kart I don't know if you are familiar with Wartrace Tennessee but I use to Drive over to Cedar Point Lake and Campground over by Wartrace Tennessee I use to take union Ridge Rd to lazy branch Rd and that would bring me out by cedar point lake look up Wartrace Tennessee some time and Estill Springs Tennessee I worked at a cattle farm and Tinsley Asphalt in Estill Springs Tennessee off Ake St
Great project! You definitely have editing skills bro, i noticed how well your video was done few months back when you were out with the goonzquad brothers swimming! Very impressive, keep up the great work!
What kind of air intake is it that you got? I want one which makes a nice sound instead of the stock airbox on my bike.... Can't find any that won't kill the engine when its raining :/
This one is only compatible with a vm22 carb. www.ebay.com/itm/40mm-41mm-42mm-43mm-44mm-Black-Foam-Air-Filter-Straight-42mm/282981555078?hash=item41e303db86:rk:1:pf:0 If running a different carb, Get some caliphers and measure your outer spigot diameter in mm. Then type xxmm foam air filter on eBay or Amazon.
with the amount of time and money you put on that predator 212 you would have been better off with a lifan 200cc 5 speed manu clutxh like I am atm building my gokart
I went riding and got stranded because my belt broke. Never buying any form of belt driven transportation again. Period. The belt also flexes and looses significant amounts of horsepower. This is also my last video of the go kart. I have much bigger things coming! Stay tuned!!
Hope you guys enjoyed!! Which was your favorite song out of the three ? Who wants to see this style more on RUclips !?
Vasily Custom Builds yes I really enjoyed this
I enjoyed it and can u give me the link to that air cleaner
You do good work man I wouldn't leave any details out either can you believe someone that doesn't unless you're 10 years old no excuse
Fav song losk sky dreams
Awesome build, a little constructive criticism: turn your amperage up on your welder, if it's all the way up find a better power source, slow down a bit, take your time and feel what you're doing and pull and push that puddle and you'll get the hang of it, and remember, a grinder and sanding disks can perfect a mistake. I could see your progression tho and that's awesome.
And when you're painting, remember it's all about prep, the cleaner the steel the better, get you some good primer, self etching is more perfered towards aluminum but works just as great for steel, 3 or 4 light coats of your color, and go balls out on some clear to seal it up and make it last. After your last coat of clear, this is the absolute hardest part but trust me it is worth it, do not touch it for at least 2 days. If you could wait a week that would be even better. Spray cans DON'T HAVE HARDENER so letting your paint cure 100% is good for it.
Not saying you're not doing it right, you're doing an awesome job, I'm just sharing knowledge to maybe make your life a little less stressful. I'm OCD when it comes to fabrication I can't help it 😂
Thank you for the advice! The paint job on this one was crappy and turned out streaky. However, I have learned most of this the hard way with my other builds! This project was finished around summer 2018. Since then, I learned the whole painting process, I painted a bike, a scooter and took my car to a shop to have it painted. I have learned alot about paint work. I think in the future I will invest in a compressor and paint gun. I will start using 2k Clear in cans from now on. Still have lots more to perfect on a welder.
Also, I use rustoluem filler primer in a can. Do you think self-etching primer would be better?
I think you should check out my 79cc scoooter build part 2 too see my latest paint job.
And my "how to weld flux core" video for my latest welding job.
for an up to date view
Thanks again!
Mantap bro
Saya dari Indonesia
Pretty sweet bro!!!
Goonzquad!!!!!!!
OMG!
I saw the thumbnail and came to give a thumbs up
Great job on the go kart . Throw some nice chrome rims on them
Awesome timelapse you are doing some really cool stuff. I enjoy it a lot
You are a great inspiration on how you can do great things even if you aren’t the biggest RUclipsr or don’t have much to little sponsors! I have learned so much. You are the greatest RUclipsr under 100K subs! Thanks for all the things you learn and teach everyone who watches your videos!
Thank you for your kind words! And watching!
Your welding is much better at the end
Thank you!
it so clean at last
Yeah awesome video and great go kart we just refurbished a vintage yellow Jacket go kart . It's like a brand new one now .We used a variable speed torque converter .it'll almost wheelie with a grown adult on it .. and it has a stock 212 on it we are asking $700 for it and we are building an adult two seater with a 440 and reverse next we will ask 1700 for that one . Keep it up 😁👍
man ive been lookin for that exact frame style forever ...i dont know what its called but i ad it wen i was a kid...thats a vintage body style .. a classic
That's cool! I built a two seater for me and my grandson! HE loves to ride on it
I put a STAGE 1 kit in the 212cc motor! It runs about 42 mph! It's fun
This is probably one of my favorite videos on RUclips. A little late but it’s alright
You have fixed up one of the most rad simplest carts going. You could top it off though with a set of nerf bars with plastic bumpers on each side. It will save you on the track from being bumped off by another kart. Heat a piece of 4 inch ABS pipe with a propane torch and flatten it so it is oval shaped and make your nerfs so that when you add the plastic pipe bumper to the nerf it will be in line with the outside of the wheels. All doable on the cheap.
Keren... I likes 👍👍👍👍👍😎😎😎
salam from 🇮🇩
Good work .nice video
👌🏽👌🏽👌🏽👌🏽 pa Lante ÉXITOS🎉
Great work and nice editing! You have a great attention to detail.
thank you
This was as good as I thought it would be! Nice video Vasily!!
Thank you!!!
It is awesome!only a few tips: the exhaust should be fixed in order to have less vibrations, when you weld you should strip the paint around the area you are welding so you have a good weld integrity,and lastly you should also paint the frame with a coat of primer before applying the red colour,the clear coat is also a good Idea after the red paint
Ike and john should give u a shout out....nice work
Awesome transformation! I love the outcome. It’s about time I get around to doing something with my go cart hahaha
Get at it bro!!
really brings me back to when i was 14 with some frames and a gifted buzzbox selling weedwhackers to get that new 212 and parts, great work man
Appreciate it sir!!
Great Job kart looks beautiful
I enjoy your videos
Found your channel through "RBG" just subscribed! Awesome content bro. You're bmx bike project has inspired me to get back out into my garage to build again!!! Thanks youngster! Brrraaaaap!
Thank you for watchin'!!
This was sweet. You should try one of those chines torque converters on it
My boy gets down on all of his builds ‼️🤟🏼🔥
haha
I grew up with a red go kart like exactly like that it was bad ass I use to ride it everywhere I could walk off on a quad with my go kart I don't know if you are familiar with Wartrace Tennessee but I use to Drive over to Cedar Point Lake and Campground over by Wartrace Tennessee I use to take union Ridge Rd to lazy branch Rd and that would bring me out by cedar point lake look up Wartrace Tennessee some time and Estill Springs Tennessee I worked at a cattle farm and Tinsley Asphalt in Estill Springs Tennessee off Ake St
Thats awesome man! I appreciate your feedback and comments!
I am not familiar with wartrace
Damn bro..this was new and exciting..I liked it!...keep it up Vasily! 👍👍👍
Haha, Switched it up with the rock music and fast cuts, Glad you liked it!! Thanks for watching
Great video...
I think this new video style is good to sum everything up once a build is done. Keep the build series’s up though. Good work
100% Thank you!!
Nice work 👍. Keep stacking them dimes.
Great vid brother as usual. Keep em coming and I’ll keep watching!!
Appreciate it!! Thanks for watching!!
Excellent work mister !
That was a sick edit, keep up the good work. Stoked for the new project!
Sweet video! Crazy good editing!
i like the music
Nice work. Your skills are definitely improving. I have watched all of your videos, your skills are noticeably better.
nice.
Nice!!! Great restore-rebuild vid!
Awesome job man.
Awesome build 💪🏻
Appreciate it bro!!!
Good video im putting an engine on my old go kart too!
Nice video, great editing!
Brutal que curete
you took you time and it was worth it. Make a diesel mini bike.
I inspire to this type videos
Good job!
thank you
Great job!!
Looks red hot 😉. Mines alot rusty tho XD it needs help. Keep up your good work 😃
Haha Thanks!!
Cool build bud ✌✌✌
Your ride has officially been pimped! "Gokart edition" (pops collar) 🤣 great video bro!!
Good job buddy just keep up the work keep it up
Great project! You definitely have editing skills bro, i noticed how well your video was done few months back when you were out with the goonzquad brothers swimming! Very impressive, keep up the great work!
Thank you sir for keeping posted!!
Good video
Enjoyed keep it up only thing I wish to have seen the rims done
Kelly Davis in Macon GA 🍂🌵☘️
Sweet kart bro
Practice practice practice. That’s what it takes.
Veri Gut
Keep the welding coming
❤️
Use primer next time it will turn out a lot smoother and better looking.
Hey that looks very damn good. Whomever tought you or however you learned to do this. Im impressed good job bud..
Thank you sir!! 33% Self taught 33% from my Dad and 33% from RUclips haha
@@VasilyBuilds well im very impressed and look forward to see what els you come up with.
Good vid man but always wear that hood arc eye is not fun at all lol keep up the good work
I was gonna make one but then my step mum said we will do it over the summer holidays
Have you had any problems since this vehicle doesn't have a differential ?
Wish I could have a go kart like that or in general
Is that cvt you installed? For power transmission.
Nice Nice!! TheGasman In This Bitchhh
Haha Thanks Gas man!! Keep it up bro
@@VasilyBuilds same to you man
Hey Im probably too late to get a respond but I love the go kart and where did you get the wheels with the bearings.
the back wheels
What kind of air intake is it that you got? I want one which makes a nice sound instead of the stock airbox on my bike.... Can't find any that won't kill the engine when its raining :/
This one is only compatible with a vm22 carb. www.ebay.com/itm/40mm-41mm-42mm-43mm-44mm-Black-Foam-Air-Filter-Straight-42mm/282981555078?hash=item41e303db86:rk:1:pf:0
If running a different carb, Get some caliphers and measure your outer spigot diameter in mm. Then type xxmm foam air filter on eBay or Amazon.
@@VasilyBuilds aight, ill check it out, Thx mate
What was that you took out the crankcase at 2:40 ?
Its a governor gear, restricts rpms to 4800rpm. removing can add +2000 rpms
You should try a sand blaster would take and hour to strip not days
Swapped out a good American motor for a Chinese one that takes 5 pulls to start 😂😂😂
Vasily, Hope you are doing better. You inspired us to start our own channel. Check it out while you recuperate!
with the amount of time and money you put on that predator 212 you would have been better off with a lifan 200cc 5 speed manu clutxh like I am atm building my gokart
What kind of transmission is that? An alternator type?
🤣🤣
I need to know the exact parts although what frame is that from gopowerspoets need to know engine seat all I want a replica.
Hola ....porque le quitas al motor el gobernor ?.....
Is that the one
U drove into house
1:09 I got lung cancer and tetanus just looking at that thing
Do we know what make cart this was?
Do you still have that 5hp Briggs?
no
💀did you fr take the governor out lol he’s gonna over res it and it’s gonna blow
Don't worry bout it
What was it that you took out of your engine at 2:40 ?
governor
The Briggs 5 hp engine will dust that 212
What is the compani of this engine
Do you still have that go kart
Yes, I think I'm cutting it up soon and going to salvage the engine
A 212 Hemi.
Anyone know we’re I can get a cheap go cart?
Kya mujhe eske sare parts mil sakte hai aapke app
4:28 why did you do that?
Aap kaha se ho
Nooooooo put the Briggs back on
I gave it away
Where did u get the wheels
Gopowersports.com
Need a cvt
I went riding and got stranded because my belt broke. Never buying any form of belt driven transportation again. Period. The belt also flexes and looses significant amounts of horsepower. This is also my last video of the go kart. I have much bigger things coming! Stay tuned!!
Wha yll