SRAM GX 12 Speed Rear Derailleur Fitting Guide
HTML-код
- Опубликовано: 2 янв 2025
- SRAM GX 12 Speed Rear Derailleur Fitting Guide If you find the videos helpful and would like to make a small donation to help support the channel you can do so here www.paypal.com...
Buy me a coffee
www.buymeacoff...
Show your support via the Patreon page
/ freetocycle
Follow me on Instagram
www.instagram....
info@freetocycle.co.uk
Thanks for watching.
I am only 5mins in and already this right here is the best derailleur replacement and tuning guide on youtube . I love the angle of the fly wheels under the cassette and dialing in high and low screws . Incredible !! thank you !!!
Thanks! Helped me out a ton
Best tutorial I've seen on this. Installing a GX groupset today. Thanks a ton.
This is without a doubt, the best video on this subject.
I never thought to pre-index the rear derailleur before fitting the chain but it worked like a dream without any barrel adjuster adjustment afterwards. Crisp changes and no rattles whatsoever. And this is a 20+ year old SRAM derailleur! It took maybe 20 minutes. Brilliant. Thanks
Wow this was better the the park tool guys.
Agreed.
Holy shoots I totally agree dude 👊🏻
You are the man 👏👏👏👏🙏
45 minutes f-ing around without proper result.
Watched your instructions, loosened everything and starting from square 1, perfect shifting after 5 minutes. 🤙😌
Best information on this project. Thank you so much.
Perfect! This is all the info i needed, thanks! WAY more articulate and detailed than other, more highly viewed, videos that glossed over critical information.
I got the GX derailleur and just waiting for the GX shifter and chain to come in the mail. When I get it I'll be sure to watch this guide again during the install. Thank you!
Thank you! Fitted a new derailleur to my bike this evening following your instructions inc. indexing the gears with the chain off... Works a treat!
Update: Yeah, not quite as much of a treat as I initially thought... The chain catches (and jumps when powering down in top gear) on a couple of teeth at the top, on the second smallest sprocket (gear 10 of 11).
Does anyone know what to do? Indexing is fine - smooth changes up and down, but just the chain jumps when putting serious torque through top gear.
Could I solve the problem by fitting a larger chainring (currently 32T) to reduce the articulation from the smallest sprocket/highest gear (11T)?
Hi just to say a great guide at the right speed of info as well. Good to hear a West country accent (ex Bristol now in New Zealand) cheers
BRILLIANT VIDEO! The best one I've watched on the matter and after close to 50 I finally got to see exactly what you were doing.
Perfect With Every Detail, Thank You Boss..
My GX derailer is here, im just waiting for my Powerlink, upgrading the SX derailer on my Marlin 8... I've watch this video from start to finish about 5 times and I have almost memorised your steps! Thank you. Can't wait to do it, the Local bike store wanted to charge me $80 bucks to do it. Now i save some money and learn how to do things myself :)
How did it go?
Did you have the change the shifters as well or just the derailer?
@@TheMaKeRvAnRIX I did the shifter too, got a gx. It was so easy. The only difference I did was I adjusted the high limit screws with the chain fitted. The low limit screw I did as intructed with no chain on. Shifting is amazing. Huge upgrade
@@abshassan okay thank you, I ordered a trek x caliber 8. Comes with the sram sx setup but after reading that it's a below optimal build I have been looking for upgrades.
Do the shifters have to be changed when the derailer is upgraded?
Thanks for the info.
@@TheMaKeRvAnRIX No you can use the stock SX shifter but I'd highly recommend getting a better Shifter, the SX shifter does the job but its plastic and low quality.
I highly recommend upgrading the chain too, the SX chain is pretty weak.
At the end of the day, go ride your bike with the SX first and see how you go, the upgrade is highly worth it but you dont need do it straight away.
Thanks mate - I can always count on your videos to be complete and very 'real-life' practical!
Excellent instructional video! I looked at several and yours was the only one I consider complete with cautionary notes on areas that cause problems. Thanks very much!
Found this video really useful, replaced rear mech with ease today following this.. Many thanks
So brilliant getting the info across to the ordinary people in biking, thank you 😊
Best video I have seen on this install yet. Kudos and great work.
Well done sir. I finally understand what is going on back there. Thanks!!!
best video on this by a very long way - very clear visuals and the easiest way to do it, thank you very much, well worth a donation which I will be making.
Great ! Makes this adjustment so much easier !
Thanks! Worked perfect following your guide steps installing a new GX derailleur!
You turned what would of been a headache into a quick and easy job. Thanks!
Your videos are spot on mate. So helpful, detailed and dont talk on about anything but whats needed. Thank you, made reinstalling my sram nx easy.
Thank you so much for this tutorial not even sram is this good.
I must say this is super informative! Thank you sir.
Such a thorough guide you have shown. Cheers.
Really helpful and well explained Especially the bit about the rotation of the cam around the B screw.That's easy to miss if you don't know about it.Big thanks.
Nicely done. Very helpful!
Fantastic work! Thank you!
Brilliantly in depth video. Thanks for this as I found it very helpful.
Great video helped me fit my derailleur nicely even though after taking note of your comment about not pulling the cable too tight when doing it up I still managed to make just that mistake all sorted now thanks for the help
You're amazing!! Thank you for such a thoughtful and thorough vid. Exactly what I and people like me need!
Exactly what I was looking for, thank you.
my god i cant thank you enough for this vid life save man
Brilliant video. Very clear and made it easy for me to change my mech.
Just followed your video, thank you so much!!
Good video. Before nipping up the cable on the derailleur, you should mention to turn the barrel adjuster out a bit for fine cable tensioning.
He did
Thank you, brilliant instructions ❤
Quality video, thanks. Been trying to understand stand this fully and now I do. Cheers
You explained it really well, thank you
Thanks man! As always, great instructions, and my new GX Eagle Lunar (520%) shifts smooth as butter :)
Great this. Thanks for taking the time.
Perfect. Well explained. Cheers from Finland
Very helpful. Much better than the one from sram. Thank you
Love your video made the how to do this actually do able with far less adjustment later needed. Thanks!
Well, just realized GX 12 speed model doesn't use a bolt, it is riveted instead, but the hole looks like a 2,5 allen bolt 😅. I just drilled it and replaced it with a Leonardy Factory kit that includes pulley and bolt, as there are no Sram spare parts for this model.
Thanks for saving me a lot of money!!!
Really great video sir. Thanks so much!
best in depth video
thank you for this clear guide.
Just replaced my GX rear mech how easy was that thanks dude 🙌🙌
Thanks a lot for making this video. The instructions are great and really helpful!
Nice and clean guide 💪🏽
...liked and subscribed ❤️
Great video man, thank you
Very good vid sir!!!! 😎
Thank you for this
Thank you very much for going into this level of detail, this is incredibly helpful. While I will probably let my local bike shop install a new SRAM derailleur on my daily driver just to get it up & running as quickly as possible, I will most likely eventually build a bike from scratch with a SRAM NX drivetrain, and I will be revisiting this video often.
Thanks, just fitting it now.
Very helpful thank you
This is what I have on my bike. Works fine.
Great video! Really helpful, love all your stuff. I could probalby build a space ship with the instructional videos that exist on you tube. 🙂
thanks man! Good work!
Great video. Thanks 👍😊
good video, thank you
Thank you!
thank you👍🏼
Thanks for you sir
Thanks a lot
Thanks for the video! Is there a DIY way to avoid using the red B-gap tool? thanks!
Thanks for the video! I'm facing a lot of issues wit GX rear derailleur. Shifting became hard after some time. I can see the cable pulley on the derailleur doesn't move smooth. I can see there is an spare part avaiable for X01, XX1, but not for GX. Do you know if the cable pulley can be removed? I tried to unscrew the bolt but it was impossible
Great vid…don’t suppose you know the part number for the sram tool you used to finally position the gap to the cassette please ?
Good video I thought you were supposed to do b tension in second largest cog at sag.
Great video. But did not work at me. When I fixed the wire, I couldn’t shift in to the first/bigest gear. I needed to push derailleur to the bigest gear and then tight the wire. And also need to adjust the wire on the shifter. Your video helps really a lot to understand how to set the derailleur.
Hi, great video and well explained.
Pls can you also suggest what type of pulley's (jockey wheels) one should get to fit the Sram GX derailleur if you were to replace them?
Very thorough, Thank you, very much! There is also a white plastic tool that come with the kit, sort of like the red one you used to true the gap between chain and cassette. Do you know what the white one is for and how do you use it?
The white tool is just the updated version of the red one! It clips onto the largest sprocket on the cassette and then makes contact with the guide pulley the arrow then lines up with the Centre of the guide pulley!
Locking feature is really cool.
thx, just got a gx rear mech, gone from 11 to 12, and did not realise the cable needs threading through the guide after the pulley at 7:50 so thanks. my cable kept jumping off the guide and could not work out why.
Did you have to remove shock or deflate sag for chain fitting and b screw adjustment?
On a full suspension bike make sure you size the chain with your suspension in full sag! B-screw setting in normal position.
Thanks so much!
Mate, so I'm trying to run a SRAM GX 2.1 10-speed rear mech with a SRAM-Red 10 speed road shift lever. I can't seem to sort out the shifting around the 3rd and 4th cog (starting from the lockring) area on the cassette. It either won't shift up - and when I adjust it shift up - then it won't shift down. Any tips ? Cheers !
I've just removed my derailleur to check the hanger alignment. Before removing it, I noticed that the B screw was pushing against the hanger, and NOT the little tab on the derailleur. The screw has actually caused marring of the hanger, and my hanger is actually just an extension of the frame - it's not separate. (steel frame). Am I to understand that the tab should be INBETWEEN the hanger, and the end of the B screw, such that the end of the screw rests on the tab? Is that the only purpose of the tab - to protect the hanger? Seems a bit odd.
What if you also need a new chain?
Was wondering how come you did not show how you determine the length of the chain. I am assuming you had to cut the chain to size. Or no?
Subbed and paid you a tenner (USD). On adjusting the B screw do you still need to do so with the frame in sag position? I didn’t see you make mention of this but wanted to check. Cheers.
Thanks! On a full suspension bike the adjustment should be made in the sag position.
My cage rams into the cogs when I release the cage lock. What did I do wrong?
Whete u get chain protection
The SRAM buggers have put a torque screw in my pinch bolt point! Not helpful!
I put a gx derailleur onto a sx cassette and I have grinding noise when I backpedal and my chain came off once.. my bike shop told me I need a gx cassette to solve the grinding
I read somewhere a sram X01 chain would fix this, cheaper than a cassette.
great video...thank you.