I love this guy. Didn't know what I thought about him the first video I watched but I was like...let's keep watching him. Then was like. THIS FREAKING GUY IS ABSOLUTELY FANTASTIC!!!!!!!!!!
You can lower it without cutting. You can adjust just about everything on the tetra. It's truly an awesome little crawler. I've taken mine completely under water as well.
Made the jump from my 12428 up to an Arrma Senton. I'm actually quite looking forward to when it arrives, hopefully tomorrow. I have some batteries and a new receiver/transmitter ready to plug in. Been saving up the last few months for everything!
The enthusiasm is gold man! Have you done a review on the wpl 1/16th crawlers like the b16 and c24? They look like a pretty cool bit of kit and theres heaps of upgrades for them
Much prefer the yelling version. Makes the video fun!!! The axial dead bolt 1/24 is a bit better handling on rocks than the Jeep version. Especially with a Talbot style hot glued brass washer in the front rims.
Good stuff mate. Love a mini crawler video. Perfect for lockdown!!! I'm not a fan of the body on the panda but it's dead capable . And those oil shocks are a sweet little extra .
I enjoy watching all these crawler videos! Too interesting on all the different obstacles these little machines can make it through. And it gets me every time when you go off subject, and you go anyway, anyway anyway anyway enough waffle, more action 😂😂 got me laughing to hard sometimes!! Keep it up Kev!
Maybe you could make a Speed Test video with all the nitro cheapos? And maybe you could say if there are spares available, because that's very important.
KEVIN !!!!!! THANKS A LOT ... Due to this covid lock down, and your enormous vid collection. SO EPIC AND FABULOUS, ( DAMN AMAZON !!!!!! ) I have spent a ENORMOUS amount of coin on RC Vehicles. Now I am trying to find a RC octopus to run them all.(8 s of course ) I would totally love to be in your circle of FRIENDS !! not possible but wanted you to know. Off the chart channel. SUPERB !!!!!!
Uhh. I picked up one for $100 at a local shop. It is a sweet little rig and just needs some weight distribution adjustments. Front is a little light. Low speed lacks torque but is ok for precision turns or lining up, but you need medium to get over a hump. High speed is a blast for racing around the yard. One of my dogs and a couple of my cats like to chase it / get chased. Hitting bumps at high speed can make it hop about 6 inches in the air and it lands like a champ on those oil shocks. Really a great value for $100. Not sure what the deal is with banggood charging $178 Even Amazon has it for $109. Just get one from there and have a blast. I got this one since we are still waiting on backorders for the scx24. Glad I didn't just wait for the Axial and pulled the trigger on this one. I have some videos I will post eventually.
You should do a video on your business channel about how you got to the success level that your at now. Like everything you did wrong and what you did right
Love my scx24 "yellow banana"grease mod to shocks is a must,and took some molding clay and lead fishing weights to the inside of the wheels,and also soak the tires in wd40 and they soften up for better grab,surprises me on all my courses I set up,even when I'm thinking it wont make it,it makes it!,love what you do,cheers brotta👊
I like the way you do "YOU'RE VIDEOS ". Some people don't appreciate a hyper personality. We're 1 of a kind
The professional unboxing was basically James May.
LOOOOOOL
Only things missing were a striped jumper, a cup of tea and a cheese & pickle sandwi-
Oh, actually, that's not a bad idea...
James may needs to colab with Kevin!
so tru
Lol true
I actually like to see more of this mini Rc offroader
I had to laugh at that personation of being professional, it's like my mum when she is explaining things to me
@Leo Oscar oh,rly?
I uve
I was actually looking at this on amazon before watching this video!
That sensitivity joke had me rolling 🤣
That little devastator is a beast!
Noone:
Kevin: DIRT CHEAP
me: ogey
Him today: SO EXPENSIVE
everyone: wait, thats illegal
He will get arested lol
@@miloszm.4288 fr🤣
Fr
Hay keg this solved stuff is inoyd me I ken not play with me rc car
Justin haywood that made total sense
Watching all of these rc videos makes my bank account scared😂
Run. I lasted a week b4 I had to get one. Ended up getting the JLB J3 Speed $400 out my account lol. I Don't regret it tho
Go and watch some mtb reviews then you will realize how expensive the simplest things can get
Same here mate🤣🤣
I’ve been asking my parents a for some for Christmas but that Sade no because they’re to expensive
Lol try 1/5 gas money pit my lad i love it tho 👻
I like the shouting it makes your videos energetic and unique
It’s not like morgz lol
I just have to turn my volume down
Sadly shouting is no longer unique
Why are the edges that thick in the intro?
"If only we could turn down the sensitivity of the haters" had me laughing.
I love this guy. Didn't know what I thought about him the first video I watched but I was like...let's keep watching him. Then was like. THIS FREAKING GUY IS ABSOLUTELY FANTASTIC!!!!!!!!!!
You can lower it without cutting. You can adjust just about everything on the tetra. It's truly an awesome little crawler. I've taken mine completely under water as well.
I’ve taken a Kmart rc car under water and it didn’t break
Kevin can make anything entertaining, that's why he is my favorite RUclipsr.
Wrong
Made the jump from my 12428 up to an Arrma Senton. I'm actually quite looking forward to when it arrives, hopefully tomorrow. I have some batteries and a new receiver/transmitter ready to plug in. Been saving up the last few months for everything!
The enthusiasm is gold man! Have you done a review on the wpl 1/16th crawlers like the b16 and c24? They look like a pretty cool bit of kit and theres heaps of upgrades for them
Much prefer the yelling version. Makes the video fun!!! The axial dead bolt 1/24 is a bit better handling on rocks than the Jeep version. Especially with a Talbot style hot glued brass washer in the front rims.
Good stuff mate. Love a mini crawler video. Perfect for lockdown!!! I'm not a fan of the body on the panda but it's dead capable . And those oil shocks are a sweet little extra .
That Devastator... Pretty darn cool
the successful youtuber doesnt need me to tell him that his way works. you know what your doing.
Kev’s method is awesome
the professional unboxing is the best
KEEP BEING YOUR BADASS SELF KEVIN!
Thnx Kev for the rc car vid grind
Yes, more testing with the whole lot of micro crawlers!!! Love it!
Can you make more videos? Your video's are great! I like you!
I'm working on it!
@@KevinTalbotTV you are the best!!!
We need a golf video from you
It's expensive, because the packaging is first class!!! Damn is the most impressive packing job I have seen for any RC I have bought.
its low throttle control is the worst ive seen
Kevin talbot is the No.1 rc youtuber
I enjoy watching all these crawler videos! Too interesting on all the different obstacles these little machines can make it through. And it gets me every time when you go off subject, and you go anyway, anyway anyway anyway enough waffle, more action 😂😂 got me laughing to hard sometimes!! Keep it up Kev!
Kev you should have the trx4 vs the Full scal Land Rover
Or
The really small crawlers vs the trx4
If there was a one handed rc driving contest, we all know Kevin would be the one to call.
DO THE MINI CRAWLER SLOPE VIDEO! 👍👍😀
Dude, I love ur vids and the RC cars you use 👍🤙
I love the look of that red truck
Kev the zop power lipos can no longer be shipped to the uk do you know if that is permanent?
Yes yes yes please do a video of all the mini crawlers that you have
If this video goes viral during lockdown does that make Kev a social influenza? 😁
Me n wifey ran the RC cars yesterday, jumping driveway, tumble WUMBLES, bashing, lots of laughs🤣🤣🤣🤣
Hey Kevin absolutely. Do a video on all of the mini Crawlers and what their capabilities are, length of the video does not matter.
Wheel weights are a total game changer for the scx24
Maybe you could make a Speed Test video with all the nitro cheapos? And maybe you could say if there are spares available, because that's very important.
Heck yeah that's ready right there
Yes I want to see an FPV crawler video!
Kevin we watch you because you are different 🤔 IN A GOOD WAY 🤗❤️
Uga duga valley!!!! Love it
I am down with Kev's way
Yesss I have both the x1 and k1! I had mentioned he should get one of them and review it! It's a badass mini!
Ecx axe truck you should buy one Kev!!!!!!!
I swear he's only buying mini rcs out of boredom
Yup
Kinda
First minute and half details why Kev is much more fun to watch than Tomly or Drfitomaniacs
I'd be down for a mini fpv vid.
Thanks kev
We like the long videos lol
Enough waffling! I laugh every time Kevin says it 😂
Traxxas needs to release a micro crawler now...
Darth Severus that would be awesome!
@Darth Severus Mini crawler, big price
I like the way you do it kevin
KEVIN !!!!!! THANKS A LOT ... Due to this covid lock down, and your enormous vid collection. SO EPIC AND FABULOUS, ( DAMN AMAZON !!!!!! ) I have spent a ENORMOUS amount of coin on RC Vehicles. Now I am trying to find a RC octopus to run them all.(8 s of course ) I would totally love to be in your circle of FRIENDS !! not possible but wanted you to know. Off the chart channel. SUPERB !!!!!!
Comment in Talbot style...
AbsOOOOoooluteeely EPICCCC 4:04 loved that😍
How about a “my favorite RC tools” video ?
Keep doing it your way Kev, it's the best way...
Uhh. I picked up one for $100 at a local shop. It is a sweet little rig and just needs some weight distribution adjustments. Front is a little light. Low speed lacks torque but is ok for precision turns or lining up, but you need medium to get over a hump. High speed is a blast for racing around the yard. One of my dogs and a couple of my cats like to chase it / get chased. Hitting bumps at high speed can make it hop about 6 inches in the air and it lands like a champ on those oil shocks. Really a great value for $100. Not sure what the deal is with banggood charging $178 Even Amazon has it for $109. Just get one from there and have a blast. I got this one since we are still waiting on backorders for the scx24. Glad I didn't just wait for the Axial and pulled the trigger on this one. I have some videos I will post eventually.
Your style is the best style ever
Kev... you should give all your cars a name... ;P
Also Kev, extra love for scx24 vids. I have one so you vids are very informative for me. But I love all the mini crawlers too.
Dirt cheap =£250 usually
Soooo Expensive= £150 today 😂😂
Your old mini is siiiiiick!!
Your camera recording skills are very good considering you’re using one hand and you’re also not focused completely on filming. Great vid!😁
KEV IS BACK
You should do a video on your business channel about how you got to the success level that your at now. Like everything you did wrong and what you did right
Man I can’t wait to see that Porsche in action
Having a go pro head mount would be great
Thanks for keeping me entertained during silly lockdown Kev
You were so funny when you talked so calmly.I was laying on the floor of laughter. 🤣🤣🤣
Woah woah woah, bit unfair giving that epic looking Mini teaser pic!!!
Would love to see some fpv crawler vids kev, just setting up my redcat gen8 for outdoor fpv when the bits arrive....
Kev your the main RC related RUclipsr that I watch and your videos are so good. Keep up the good work dude.
Kev you should make a crawler course at your new shop if you do it!!
Scx24 tests! Aftermarket is loaded with upgrades for it!
@5:58 JOEY!
Fun little rig👍 Seemed like a fair comparison to me😊
Hey bro let make more video about xmaxx ... ilove it ❤️❤️❤️❤️
the transmitter looks cool with the fake disc break thing
The Panda Hobby is real nice. I ended up going with the Axial SCX24 1967 Chevy C10. All fun little vehicles.
So entertained by this. Thank you.
It's 2:10 am here in Philippines watching your vids Kev
For those who just opened this video and were wondering well how expensive is it?
Price: US$178.59
Idk where you saw that.. $109 on amazon and panda hobby
Thanks
Your way of presenting is much better
Thanks Kev! Your videos always bring a smile to my face!👍
That's a cool little truck, I like the little crawlers, I have a scx24 jeep,proline ambush and Orlando hunter jeep and they're a little fun.
Love your vids
Love the content and keep up the good work🍾🎉🎊
Im getting the Panda hobby Tetra X2.. love the vids
Are those "Dolls" on your course ?
Great video Kev
video on that soon!
@@KevinTalbotTV I'll be waiting. 👍😎👍
Raminator Video pleas
Love my scx24 "yellow banana"grease mod to shocks is a must,and took some molding clay and lead fishing weights to the inside of the wheels,and also soak the tires in wd40 and they soften up for better grab,surprises me on all my courses I set up,even when I'm thinking it wont make it,it makes it!,love what you do,cheers brotta👊
Your way of the video is one reason why I subscribed! Your videos are epic!
thanks!
Kevin Talbot np👍your job looks a lot of fu
Fun*
Do another competition with all the indoor crawlers and make the track looong
do another rc mini crawler competition with all your mini crawlers