8 min DIY on

Поделиться
HTML-код
  • Опубликовано: 6 окт 2024
  • Short video of me changing the #LOWER #CONTROL #ARM #END #LINK (i.e., #DIAGONAL #CONTROL #ARM aka #front track #arm) on my 07 Porsche Cayman 987.1 with basic tools. Very easy process and shops will charge you about $2,500 for this service with parts and labor.
    Duration: 3 hours or so depending on your skill level
    Tools needed:
    3/8 battery powered ratchet
    1/2 Impact wrench
    Breaker bar
    Torque wrench
    Loctite
    11/13 crescent
    19 mm bit
    18 mm bit
    torx 25 bit
    Jack stands
    Floor jack
    Don’t forget to like, comment, and subscribe to the channel. Leave your thoughts below for the group.

Комментарии • 15

  • @512TXSDIY
    @512TXSDIY  3 года назад +2

    Don’t forget to like, comment, and subscribe to the channel. Leave your thoughts below for the group.

  • @gordonmccall7770
    @gordonmccall7770 23 дня назад

    @512TXSDIY Thanks for your videos, very quick and easy to understand.
    When I'm turning the wheel I sometimes feel that I have a slight delay in my steering, I turn the wheel then feel the weight of the car match, then I turn that little bit more, I was thinking Anti roll bar bushes, any thoughts?? (After watching your video on changing them thats what led me to this video)

    • @512TXSDIY
      @512TXSDIY  22 дня назад

      Thank you for watching! Does your car pull when you let the steering wheel go?

    • @gordonmccall7770
      @gordonmccall7770 22 дня назад

      No

  • @ZENRAGEExhaust
    @ZENRAGEExhaust 3 года назад +1

    💪🏻👍🏻👍🏻👍🏻

    • @512TXSDIY
      @512TXSDIY  3 года назад

      Haha. Thank you Remi!

  • @bacnguyen8352
    @bacnguyen8352 2 года назад

    Were you out at lime creek rd today around 6pm? I think I saw you in my white 987

    • @512TXSDIY
      @512TXSDIY  2 года назад

      Hey Bac! No it wasn’t me. I’m in North Austin/Pflugerville area in Blackhawk. How was it?

  • @N911GT2
    @N911GT2 9 месяцев назад

    Great video, but there are only metric bolts on a Porsche ;)

    • @512TXSDIY
      @512TXSDIY  9 месяцев назад

      Thank you for watching! What you driving?

    • @warrenlucier5796
      @warrenlucier5796 5 месяцев назад

      True, but some fractional wrenches are very close in in dimensional tolerance and feel lucky for not having to use Wentworth (British Standard) too .

  • @Sylverlee
    @Sylverlee 3 года назад +1

    What are the symptoms to this vs tie rods? Is an alignment required? Thx

    • @512TXSDIY
      @512TXSDIY  3 года назад +1

      Thank you for the comment. Symptoms to this is a very obvious thump when going over speed bumps or really just uneven surface areas. It feels like the front is bottoming out a little.
      Tie rods- I would normally feel some play. There would be loose components when braking, steering wheel vibrations etc.
      Don’t forget to like the video and consider subscribing if you haven’t already.

  • @Perceni
    @Perceni 5 месяцев назад

    My steering wheel is shaky. changed tie rods and nothing changed. Did you have those symptoms or have you had them?

    • @512TXSDIY
      @512TXSDIY  5 месяцев назад

      Have you checked your tires? Cayman and Carreras sit lower and have positive camber so tires go quicker.