These are available in local stores for very affordable price. Now there are lot of options available. For instance carbon racing provides good steel ones
True. I mentioned that. And, it's good if it's not making that noise. All these are some very minor mods and even if it's there we can still live with it.
Very nice mods.... 👌🏼👍🏼 Just a suggestion.... If we could put the front mud flap from inside of the front mud guard....???! Is there enough of space between tyre and mud guard...???
Yeah space is there, but I lost one on the way 😂. May be I didn't stick it well. So, I didn't suggest that. But, problem is if we loose something on the go, our pants will be dirty by end of the trip.
Space is there but if some thick slush comes on, it may take the mud flap off or even take it in and wheel may get stuck. What I did is I have screwed Bajaj Pulsar NS 200 front mudguard costing just 63 bucks on the front mudguard. Looks really good and is similar to the plastic quality of the black joint on the front mudguard. By the way, I loved the idea of sticking that mudflap on the rear tyre side.
Hi , have you face any challenge with front mud flap , I mean still it is attached to mudgaurd or lossen up or do we have to do regular sticking with 3M tape in every few months? Please suggest
Hi Prabhakar, the front mudflap is staying there for more than 6 months. But, it’s not providing enough protection. So I recently installed Carbon racing mudflap. You can check it here : ruclips.net/video/oFdqadC-_4U/видео.html
@@KittuMotovlogs thanks for revert .. even i have installed chrome mud guard extender but it keep crashing with crash gaurd or any bump or path hole passing and sound of same is very irritating, hence looking for something which can reduce this noise if I replace with chrome based mudgaurd extender
అన్నయ్య నీ సొంత తమ్ముడు అడిగాడు అనుకుని నా కోసం ఒక వీడియో చేయు బ్రో...ఏమిటంటే bs 6 yamaha fascino or ray zr ki back tyre మీద mudguard ledu... బురద మొత్తం engine మీదికి వెళ్ళిపోతుంది దానికోసం ఎదైన alternate చెప్పు బ్రో......జుపిటర్ కానీ ఇంకా ఏవైనా scooty ki kaani tyre మీద mudguard వుంది...అవి e Yamaha బల్లుకి set అయ్యేలా వీడియో చేయు బ్రో ..plz
Hey Kittu Thank you for the video! May i know where you bought this bike since it's only available in Vizag(AP) and Hyderabad (TS). If you brought in AP, how are you managing to get it serviced?
If you fix this form inside then it wont last long as you have used 3m double sided tape and not some screws. BETTER USE IT FROM OUTSIDE FOR A BIT LONGER DURABILITY. BEST IS TO USE THE SCREWS FOR PERMANENT SOLUTION.
If u have bill for ur helmet u can reduce that, extra wa means - extended warranty ? Please check this video bro : ruclips.net/video/WCXAhFeaysI/видео.html
Honda's arse should be kicked. They can't build a motorcycle with mud flaps? What kind of research/ design team do they have? And even now not available as accessory!! Ridiculous
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Another collaboration between hero and honda
Very well said brother. These small accesories, we can only get from hero brand in local shops 😀
🤦
@@KittuMotovlogsbro which bike mudflap you have used here?
These are available in local stores for very affordable price. Now there are lot of options available. For instance carbon racing provides good steel ones
@@KittuMotovlogs bro what should I ask in the local shop? Which bike mudflap should I buy from there
Tq so much for sharing your knowledge bro, inner mud flap and white sponge concept are awesome.
Happy to help 😊
The sponge thing for seat noise I had seen in Raj ka garage video I guess. My cb350 doesn't make that seat noise though.
True. I mentioned that. And, it's good if it's not making that noise. All these are some very minor mods and even if it's there we can still live with it.
How to solve honda shine sp 125 2016model mud problem?
Kindly help
Its a neat work on front wheel but you will have to do it every time it falls off, and it will be often..
And for the big mud flap use a metal or plastic strip between those holes and the get that clipped to the crash guard
Very nice mods.... 👌🏼👍🏼
Just a suggestion.... If we could put the front mud flap from inside of the front mud guard....???!
Is there enough of space between tyre and mud guard...???
Yeah space is there, but I lost one on the way 😂. May be I didn't stick it well. So, I didn't suggest that. But, problem is if we loose something on the go, our pants will be dirty by end of the trip.
Space is there but if some thick slush comes on, it may take the mud flap off or even take it in and wheel may get stuck. What I did is I have screwed Bajaj Pulsar NS 200 front mudguard costing just 63 bucks on the front mudguard. Looks really good and is similar to the plastic quality of the black joint on the front mudguard.
By the way, I loved the idea of sticking that mudflap on the rear tyre side.
From where did you find the clips for the engine mud guard flap...???
It comes with the mud flap
Amazing techniques! Specially the under seat foam thing.
Also can you help share the link for air fly leg guard that u have?
Bro..pls respond to the comment
Hi Bro, I bought it from shop near Citizen Automobiles , King Koti, Hyderabad
Hai please reply me where do u buy this crash gaurd and what's the price
What abt the quality, please do share contact number of merchant if available
I’m searching this mudflap which is in bumper. How can i get it ?
How much did the backrest and carrier cost you? That's well Integrated.
It's about 3500 including seat and tank cover
Where it’s available bro? Can u share the link
Near Citizen Automobiles, Ram Koti Hyderabad
How many kgs is that crash guard 😂😂😂
bro ahntha cost peytti bike konni malla e modifications ahh 😐 , meteor 350 or hness cbr350 edi best bro ?
There is no best bike bro , we have to compromise on few things in each bike
Let me know which model mudflaps we have to purchase from hero accessories shop ?
Pls tell
Hi , have you face any challenge with front mud flap , I mean still it is attached to mudgaurd or lossen up or do we have to do regular sticking with 3M tape in every few months? Please suggest
Hi Prabhakar, the front mudflap is staying there for more than 6 months. But, it’s not providing enough protection. So I recently installed Carbon racing mudflap. You can check it here :
ruclips.net/video/oFdqadC-_4U/видео.html
@@KittuMotovlogs thanks for revert .. even i have installed chrome mud guard extender but it keep crashing with crash gaurd or any bump or path hole passing and sound of same is very irritating, hence looking for something which can reduce this noise if I replace with chrome based mudgaurd extender
Bro big wings show room only hyd a na inka unaya normal honda show room lo service ki ivacha bike
Plz send crash guard link....
I bought it from shop bro, available in almost all stores now. Look for Airfly type Crash guard
అన్నయ్య నీ సొంత తమ్ముడు అడిగాడు అనుకుని నా కోసం ఒక వీడియో చేయు బ్రో...ఏమిటంటే bs 6 yamaha fascino or ray zr ki back tyre మీద mudguard ledu... బురద మొత్తం engine మీదికి వెళ్ళిపోతుంది దానికోసం ఎదైన alternate చెప్పు బ్రో......జుపిటర్ కానీ ఇంకా ఏవైనా scooty ki kaani tyre మీద mudguard వుంది...అవి e Yamaha బల్లుకి set అయ్యేలా వీడియో చేయు బ్రో
..plz
Sure bro. I will try. I have access 125. But it seems to be fine. ఒక facino చూసి చెప్తాను
Hi may i know where you bought Crash guard. It is looking good.
This one is from Citizen Automobiles Ram Koti Hyderabad
@@KittuMotovlogs is the crash guard specially made for honda CB 350 or royal Enfield crash guard?
It's made for RE but it fits CB350 with a small clamp
Hey Kittu
Thank you for the video!
May i know where you bought this bike since it's only available in Vizag(AP) and Hyderabad (TS). If you brought in AP, how are you managing to get it serviced?
Hi bro. I bought it in Vizag, got the first service done in Vijayawada in a special campaign, and for second service there is still 4 months time 👍😀
@@KittuMotovlogs so we have a service center for Honda Highness at Vijayawada?
We can get it done there. And I heard they are opening the Big Wing showroom in Vijayawada by Feb end.
How much did they charge in Vijayawada?
Where u did get this crash guard
From Hyderabad, King Koti
Sir isko kya kahte he iska name kya he ?
If you fix this form inside then it wont last long as you have used 3m double sided tape and not some screws. BETTER USE IT FROM OUTSIDE FOR A BIT LONGER DURABILITY. BEST IS TO USE THE SCREWS FOR PERMANENT SOLUTION.
Bro engine mud flap ekada dorukutundi
Local shops lo untay bro
Emaindhi Anna....videos Cheyadam ledhu
How much total kilometres crossed for full tank (15ltrs) and Total mileage for it ?
Double side tap se cipkaya hai mgr gir jaata hai
Bro if u have to buy a bike now, would you go for RS or highness?
Bro, I say Highness , I will upload a detailed video in a couple of days as I am completing 5000km in Highness
This is the best way to make a good looking bike to tatti😅. It's special Andhra edition
I think it is fixed inside mudgur bro
I want to buy this.
I don't think that fender flap will work, there's still more gap. Let us know
Total accessories how much cost bro.
Honda's own crash guard, front mud flap, seat cover, engine plate approximately 3900₹.
What is your location bro
Guntur brother. We can connect in Insta "kishore_thupakula"
👌
Thank you 💖
మీది ఏ ఊరు అన్న
One village in Guntur brother.
Thank u...
honda hynes ni tvs xl kante darunam ga tayary chesav kada bro chiiiiiiiiiiiiiiii
Super bro
Thank you brother.
Feels like auto😂😂
Baik ret emtha bro,,,,
2,23,000 bro. Changes from 2,23,000 to 2,30,000 depends on distributor and place
Accessories , extra warranty, road side assistance em em opt chesav bro?
Accessories levu bro nenu thisukunetappudu, remaining everything included
Vizag lo e price chepparu bro
DLX PRO
Ex Showroom - 1,92,500
Insur + RSA - 12,278
RTO - 17,350
Reg - 1430
Accessories - 2750
Helmet - 1560
Ex wa - 3200
Total price - 2,31,068
If u have bill for ur helmet u can reduce that, extra wa means - extended warranty ? Please check this video bro : ruclips.net/video/WCXAhFeaysI/видео.html
2.3 lakh premium ki inni shortcomings. R&D lo evadu unado.
True brother. I guess they have never done the real road test. Only in garages and predefined tracks
@@KittuMotovlogs This is the only reason I'm waiting to buy the bike. No word from Honda yet.
When did you booked?
@@KittuMotovlogs Haven't yet because of these problems. Waiting if Honda will do anything.
There is no bike that get's 10/10 bro. Anyways, I respect your decision. Good luck with your new bike.
Honda's arse should be kicked.
They can't build a motorcycle with mud flaps? What kind of research/ design team do they have?
And even now not available as accessory!!
Ridiculous
Bro mari cheap ga undhi bro rubber middle dhi...
Suggestion taken bro, I will check if any better option available. Thank you ☺️
Anna rootha puttincharu hahahahahah but bagundi
Bro.. meeku yella contact cheyalli?? Number / email id istara??
Hi brother, happy to connect. Ping me in Insta "kishore_thupakula" Facebook : Kishore Thupakula
Sure.. pinging you in fb
Keep the video in English.
Bhai please speak English
👍👍