Wow that is allot of parts for sure... Jura has a very High Quality Parts, your videos are nice and detailed there are not many people in my area that enjoy taking on projects like this as it requires time, skill, patents, and sourcing of parts. Keep up the good work and I enjoy your video thank you for taking the time to show all in great detail.
nice video and good instruction! I have a Philips EP5360, and I get Maintenance error code "02" ..... that does not exist in the manual for some reason , and Philips customer service refuse to say what it is. I think it is that something stuck the grinder motor. but not sure, have you sen this error before? I´m still in warranty but would prefer to fix it myself. Thank you
Milen - very nice video! My Jura ENA3 is producing VERY coarse grounds no matter what setting I use. It also is NOT producing pucks. I have taken it apart down to the grinder assembly and have tried many calibration setting even to as "tight" as possible but grounds still very coarse and not producing pucks. HELP PLEASE !!
Hi Milen, I have a Jura grinder E0103141 And looking for the plastic gears. Rock stopped the grinder and destroyed the gears. Can you tell me where to find these parts?
Milen Stoitsev thank you Millen for reply, I’ve replaced the whole grinder but still have same problem, what else can be? I’m worry it’s from the electric board?
Hi Milen I enjoy your videos very much.I have a Saeco Sirius with a display that is not showing anything, the panel lights up but no graphics touch works ( beeps ) its on separate cables.Any suggestions where I can find motherboard or display panel ? Saeco is no longer sold in the US and parts are a problem.Any help would be greatly appreciated, thanks Tom.
Internet is your best friend for looking up parts and places to order that is what I have found to be. Local Appliance Repair shops may sell too you also if you ask them nicely :)
Just want to say that it’s not to the same size of the metal balls under the ring as the balls on those three springs. The balls under the plastic ring are a bit smaller than those on the springs. I ordered the same size (7/32”) as the balls that are on the springs but they are too big to fit under the ring and will not fit.
Great guide, I now know the lubricant in the gear section of my Saeco Jura is a thick grey gum. Does anyone know what lubricant is supposed to be there? ⚙
Remarkable job! We learn so much from you. Thank you.
Wow that is allot of parts for sure... Jura has a very High Quality Parts, your videos are nice and detailed there are not many people in my area that enjoy taking on projects like this as it requires time, skill, patents, and sourcing of parts. Keep up the good work and I enjoy your video thank you for taking the time to show all in great detail.
Very usefull explanation! Many thanks for it!
Our Brilliant man
Many thanks.
nice video and good instruction! I have a Philips EP5360, and I get Maintenance error code "02" ..... that does not exist in the manual for some reason , and Philips customer service refuse to say what it is. I think it is that something stuck the grinder motor. but not sure, have you sen this error before? I´m still in warranty but would prefer to fix it myself. Thank you
Milen - very nice video! My Jura ENA3 is producing VERY coarse grounds no matter what setting I use. It also is NOT producing pucks. I have taken it apart down to the grinder assembly and have tried many calibration setting even to as "tight" as possible but grounds still very coarse and not producing pucks. HELP PLEASE !!
Треба замінити жернова
Miles, where can I purchase the brushes in AZ
😅
wow! where do you buy these gears
Very good instructions👍 where do you order your parts? I need new gear wheels for my grinder
Hi Milen, I have a Jura grinder E0103141 And looking for the plastic gears. Rock stopped the grinder and destroyed the gears. Can you tell me where to find these parts?
How about getting a used grinder?
Thank you for the video, but why my Saeco royal grinder keep spinning on and off all the time?
Hi, the problem you are describing may be due to a problem with the carbon brushes or the power cord
Milen Stoitsev thank you Millen for reply, I’ve replaced the whole grinder but still have same problem, what else can be? I’m worry it’s from the electric board?
Hi Milen I enjoy your videos very much.I have a Saeco Sirius with a display that is not showing anything, the panel lights up but no graphics touch works ( beeps ) its on separate cables.Any suggestions where I can find motherboard or display panel ? Saeco is no longer sold in the US and parts are a problem.Any help would be greatly appreciated, thanks Tom.
Internet is your best friend for looking up parts and places to order that is what I have found to be. Local Appliance Repair shops may sell too you also if you ask them nicely :)
Just want to say that it’s not to the same size of the metal balls under the ring as the balls on those three springs. The balls under the plastic ring are a bit smaller than those on the springs. I ordered the same size (7/32”) as the balls that are on the springs but they are too big to fit under the ring and will not fit.
Great guide, I now know the lubricant in the gear section of my Saeco Jura is a thick grey gum. Does anyone know what lubricant is supposed to be there? ⚙
Are you sure? Thick grey is usually thermal paste. Not a good lubricant. Saeco usually use a white grease.
I guess it is silicon grease.
Thinks more