You ever Do a Factory Reset using the Button on your NVR? The one that shows online isn't correct so just wondering if you know how to do it if you don't have access to the Email you used to setup the NVR with? (Important to setup with a good email and to use the questions and answers so a person don't get locked out of the device.. Online shows Take cover off press hold button 4-5 seconds unplug and hold 4 to 5 seconds and plug back in that don't work.
Do the ip cameras get an ip as soon as you connect them to the switch or nrv or you should manually put static ip-s to them? You didn’t show how you connected and configured at first the five cameras. They also have an ip with a different network range compared to the nvr, how do they work this way? Thank youy
Hi, I installed the following cameras with me. DAHUA HAC-HFW1239T-A-LED 2Mp STARLIGHT 3.6mm LED20m ALL IN ONE METAL BULLET MIC FULL COLOR. If I now connect a new, stronger Dahua camera with 8MP, do I have to replace the cables to the recorder?
Very nice clear video I am currently researching cctv systems and am torn between Dahua and Hikvision which would be the best choice for a first timer with cctv who is not really a good with all the tech side of things but first class on installing the cables and kit ?
Great vid and very informative, thanks. I just got my Dahua NVR and the fan is noticeably loud. Is this a known issue and can you recommend another fan option to swap it out with? Cheers
I have a question regarding the internal switch and the nic 1. Is it possible if you have a class c address for the internal dahua switch and a class a on your local network so I am able to traverse and communication via either p2p or port forwarding as I would like the cameras to be access remotely.
Hi you seem knowledgeable so let me ask I have a 8ch.smonet wireless NVR with 4bullet cams running an have ordered 2 zmodo wireless bullet cams an was wondering if u new weather or not if the new cams would auto pair upon power up or is it more to it or is it even possible thanks
Assume I already have four IP cameras (the IP addresses of which I already know) working over WiFi at home. Would this device recognize those cameras (without any physical ethernet connection)
Hello I have a Dahua NVR with 4 imou S41fa poe cameras connected to the nvr in poe. I would also like to connect my cameras with the imou life application but it does not work.
rushing to install the HD without stating a certain series; Orange WD drives or just any pc HD ? years ago with my DVR; I had to have an orange series only. ???
they all work. With cost cutting, some drives are not designed to be continuously on like the older 5year warranty drives. Best to get the drive that is designed for surveillance but even those fail at times.
Am I correct is stating that you have imported the cameras directly, as separate cameras rather than sub-channels under the NVR (which is how I did it) - which is the correct approach in your opinion? Is it possible to alter what I've done if it's not the correct/optimal approach?
LOL. As far as I have one, actually it's a 4.0 version, it's a crappy system, full of problems that you will find out once you've set it up. Mine is a nightmare to adjust and fix. The video floats, freezes, skip frames, jumps ahead, speeds frames and suddenly images vanish and you will never recover them in certain frame spots. Incredible hard to fix these faults. Then there is no decent support, live chat, etc. It's all questions and answers (you type in, or select a question and a list of answers that suits you appear), but they are not answers that you wanted to know, just crap they think you need to know. They're not telling you why live video freeze and speed up, e.g. like passing cars. Have you seen how cars suddenly increase speed and then slow down, or still-freeze on screen then immediately zip across to appear at the other end of the screen in an instant? How do you fix that? I've had my NVR for a year now and I've become sick of it, can't have an inconsistent recordings without the bulshit zip, freeze, float, stick and vanish, etc., not to mention when events are tripped, there is nothing shown on screen that you can click on to view the recorded event in Playback. You have to have a mobile App for that, unlike Hikvision that is better because whenever there is a recorded event there are numbers on the top right corner of the screen, e.g. one recorded event you get a number 1 on screen, 2, 5, or more recorded events, you get 2, 5 or more numbers. Easier to view as many recorded events in Playback by just clicking on the numbers and a list of recorded events appear. Whereas, this rubbish Dahua hasn't even got a simplified way to get to recorded events on PC screen. 🤨
is there a full manual online anyplace for the Dahua NVR7216-8P or 7208-8P? I can find all the others except that one everywhere i've looked online. Anyone know where I can download that one? Thanks
Hello, thank you very much for the explanation, I have a question, I have to be connected to the same internet network as the cameras from the pc to access the ip 10.0.0.250? and some of the screens are black and come out with a sign of question (?) mark in red, do you know why? greetings from Chile :)
hey man, thanks for your time on making this video, it’s been helpful, would you recommend an NVR that be reliable and also able to use an smartphone ?
I have a Dahua XVR5, hardware version V1.0. I'm trying to set up email notifications when motion is alerted on just one camera but I cannot figure out how to set up GMAIL as the email server. When I test it I just get ERROR without detail. Help if you can.
How can I lock a certain channel ( e.g: channel 4) , but keep the other 15 channel display on the screen. The one channel has to be under a password lock and only someone with right certifications can open and view the feed Is it possible. Thanks
Should be a WD purple HD...for 24/7 surveillance recording... Should be careful about the hd...static electricity might damage it.. I would appreciate a video on how to change IP address for the cameras..
Great vid and a bit of a long shot question but I've been struggling for 3 weeks now. The upshot is I cant access the cameras via Webservice as they use a 10.1.1.x IP address, whereas the IP address of my network is a 192.168.1.x (router and NVR). The switch IP (and gatway is 10.1.1.1) with subnet 255.255.255.0 I tried changing this to 192.168.1.x but then get the clash message you displayed. Any thoughts on what I'm doing wrong here?
Thanks for the detailed video. Is it possible to remove or reset the pattern lock and just use a username and password if you change your mind and want to be more secure after initial set up?
i have the same brand I bought,i did reset cause I added 1 camera infront of my terrace and it last ,last week I cant back my camera on my monitor it said the monitor log in was ended up. I make all the settings are good, all I gues is that the IP addres was unconnected... what should I do sir please help I had 6 cameras ive installed and now their not working.
Can technically use any HDD but.... anything except a dedicated security drive is looking for early HDD fail or system slowdown and event total failure
First, thank you. I was able to initialize my NVR5216-16P-4KS2E and upgrade to current firmware. The new firmware does seem to be different than the firmware you used in your video making some of the changes after moving to the web browser harder to follow. Any plans to update this video using current firmware? Thanks again.
Very informative... I followed the steps...when trying to add camera in registration, they don't appear automatically but when I try to add manually giving the IP of switch they appear and all show up as active but when I try to do a live preview from web version, it opens a new page which timesout after some time. When trying to view by connecting to app it doesn't show the live view either. My setup is - I have a modem from which a WiFi router is connected. Ethernet cable in the nvr is connected to the wifi router lan port. I have DHCP enabled while configuring which allocated the IP address similar to what is of wifi router. Modem to router requires a PPPoE user name and password and IP as part of PPPoE is dynamic allocation..not sure where am I doing it wrong
HI. Your default gateway on the router is 192.168.1.1 and then you changed it as shown in your video. Meaning there will be no conflict of changing default gateway and may change it anytime a customized gateway???
What great videos you have. Glad I found your channel. Cannot log into my camera from a computer. I can log into most by clicking the internet explorer “e” but one in particular just hangs. Is there a way to log in from the nvr directly? My nvr is on a 10.x.x net and my router is on a 192.168.x.x net so i can’t just enter the ip of the cam into a computer. I can’t change the day to night time without accessing the cam firmware directly. Help please and thanks for these great vids
@@ecologicaltime thank u. Any idea why this happens: I select a compression of h265, and smartcodec and a desired bitrare, and click ok, the next time i go back to that camera, everything i have selected has changed? I want to keep h265, but some cams keep changing to H264b or mjpeg without me ever choosing that? (I even tried disabling smart.codec, and stopping all recording when making the changes) Thanks in advance
comforting to hear the hdmi craps out after a while. Good quality! Why not have multiple hdmi ports ! Along with dual USB for a keyboard also ? local importer to unlock= yeah right. They can' t even speak English to understand what I"m asking !
estou com 5 delas e um NVR 1004 da Intelbras que so reconhece uma na rede wifi , as demais foram adicionadas da mesma forma via wifi mas não aparecem nem mesmo na busca , e sao todas no padrão ONVIF , e o DVR ja esta no modo de operação IP . quero sair dessa marca que so me deu prejuizo e nao fuinciona por mais de 2 anos . estou buscando NVR NAS ou NVR simples como esse da mesma mardo do aplicativo XMEYE que faço login e vejo pelo celular.
hello.. I have a question. If I have a 5MP wireless IP Camera, and I want to connect it to the NVR which come in bundle with 2MP IP Camera, will it work?
if the NVR has the bandwidth available, then it can work. Most NVR can handle higher res camera but if you put 5MP on every port then you will probably exceed the bandwidth and some cameras wont work. So you can mix your cameras, some 4MP, some 2, MP some 5MP
A great video, thanks for taking the time. Wondering if you wouldn't mind answering a question for me regarding IP addresses. The internal address of my router is 10.1.1.1 so I'm trying to update the IP address of the NVR to 10.1.1.250 however when I click on OK I get the error "Switch and the device shall not be ...." - the subnet is 255.255.255.0. When I go to the Switch settings I notice that the IP address is 10.1.1.1, the default gateway is 10.1.1.1 and the subnet is 255.255.255.0. I'm not sure what I should be changing to get the NVR visible on the home network. thx in advance.
@@ecologicaltime thx for the reply. I ended up leaving the subnet as it was but changed the IP addresses for the switch and default gateway, and after that it let me update the NVR and router address just fine. All good now.
@@ecologicaltime 255.0.0.0 is not a class A subnet it is a \8 subnet 255.255.0.0 is \16 255.255.255.0 is \24 The class A IP address range is 1.0.0.1 to 126.255.255.254 hope this helps
Am having problems setting up 2 poe switches with 16-channel dahua NVR and cameras, some of the cameras keep going off and on with an error message that(can't find host). pls any help?
Why am I not be able to see the live videos while am out side from home. All 8 channels are visible within home wifi surveillance 🤔!!Though my mobile is supported by data network while am away from home still the problem persists..Any clue you can provide me inorder to solve these issues?
@@ecologicaltime You are 100% correct! I downloaded V2.02; installed and BANG! Now nothing works.. Even tried to restore the computer. All I have now is a very damaged program. P.S. I did watch your movie on updating - will never do that (updating) again!
I found version V1.6 and have installed (nothing to lose so I went for it) and that is working 100%..... Maybe I should have done that first and I am sticking with it - no way am I going to try installing that V2.02.... ;) I was actually looking for updates for the PSS - ended up with a program.....
Awesome job with the video. But i am still stuck. I have a google wifi mesh connected to my switch and a montavue nvr connected to my switch with HIKVISION cameras connected to the poe nvr. However the nvr does not pick up the cameras and i can not seem to access the cameras directly either. Do i need to change the nvr to HIKVISION or did i miss a step? All cameras are connected via poe. Thanks!
Hi, nice video, but we have a problem. We connect all of our cameras and only 2 cameras are constantly working and showing picture. But we can't detect other cameras, only sometimes, and they tend to go offline and come back online all the time. We tried changing the IP adressess and everything but nothing happens. When we try and "device search" the cameras nothing happens. And they are all connected. Can you please help?
I got an issue , all 6 cameras in the UI show invalid username and password, did factory reset, correct password but no luck...in camera registration I can see all 6 cameras as they were previously added but status is red , Dhcp is enabled. Not sure what's going on , I am not getting enough support... please help
BUON GIORNO VEDO CHE SEI PRATICO A ME NON MI ESCONO LE TELECAMERE LI AGGIUNGO MANUALE MA IN PC PICCOLINO MI ESCE UNA CROCETTA ROSA MA NON SI VEDONO COME MAI
Good vidéo ,but i have one issue : I have two nvr dahua 16 poe integrated switch and 30 caméra dahua poe,i reset them and i assigne IP adress for nvr 192.168.1.10 and 192.168 .1.11, For caméra dahua i assigne 10.1.1.100 to .130. But why when i restart NVRs ,they restore IP adress from 10.1.1.65 and incrément value to 66 and 67 ....etc.? Thanks for your support. I m using web to configure IP directly
how does anyone know the ip ssettings on my network. I can make up any number / series. i can see my router I/P address thru config ? ip 4 etc. for default gateway. ? ? Vague if you have no idea how your IsP router is setup.
A few corrections should be made: 1. Whilst a WD Red "NAS" Drive may work, you ideally need a Purple Drive. 2. The unit is an 8 channel, not 16 channel. A 16 channel NVR requires 2 HDDs.
be careful upgrading firmware. make sure its the correct one exactly. I have had issues where firmware updates ruined my NVR. Not even the dealer could resolve the issue.
![Digital Circus Episode 4 [TRAILER]](http://i.ytimg.com/vi/abZtsmMUbJo/mqdefault.jpg)
Thank you very much!!!
The best solution, the NVR 👏🏼👏🏼🚀
You ever Do a Factory Reset using the Button on your NVR? The one that shows online isn't correct so just wondering if you know how to do it if you don't have access to the Email you used to setup the NVR with? (Important to setup with a good email and to use the questions and answers so a person don't get locked out of the device.. Online shows Take cover off press hold button 4-5 seconds unplug and hold 4 to 5 seconds and plug back in that don't work.
Thanks so much great video
Thanks sir I'm so happy to share with your idea ... So amazing
i would love a vid on how to set up the ptz patterns with this system
He sounds like Arnold :D Thank you for the video!
good information ..keep it up
Do the ip cameras get an ip as soon as you connect them to the switch or nrv or you should manually put static ip-s to them? You didn’t show how you connected and configured at first the five cameras. They also have an ip with a different network range compared to the nvr, how do they work this way?
Thank youy
11:30 isnt it suppose to find the gateway and the ip adress auto without manually write it ???? all other devices are getting those info auto
bravo .! this video is very detailed .... tnx broh. .! my problem to this topic is now already solved !
You're very welcome
Very informative but still "over my head". ;-)
Hi, I installed the following cameras with me. DAHUA HAC-HFW1239T-A-LED 2Mp STARLIGHT 3.6mm LED20m ALL IN ONE METAL BULLET MIC FULL COLOR. If I now connect a new, stronger Dahua camera with 8MP, do I have to replace the cables to the recorder?
can we plug cameras in switch instead of nvr and plug an rg45 from nvr to switch and another rg45 from router to switch
Great video!
Very nice clear video I am currently researching cctv systems and am torn between Dahua and Hikvision which would be the best choice for a first timer with cctv who is not really a good with all the tech side of things but first class on installing the cables and kit ?
Great vid and very informative, thanks. I just got my Dahua NVR and the fan is noticeably loud. Is this a known issue and can you recommend another fan option to swap it out with? Cheers
is cctv works without internet cable from your switch. I dont want to view cctv on website. just local on the monitor.
I have a question regarding the internal switch and the nic 1.
Is it possible if you have a class c address for the internal dahua switch and a class a on your local network so I am able to traverse and communication via either p2p or port forwarding as I would like the cameras to be access remotely.
El cable Poe es el que se usa para conectarse a Internet?
Dankie vir die video. Goed om 'n Afrikaanse aksent te hoor.
baie dankie
Hi you seem knowledgeable so let me ask I have a 8ch.smonet wireless NVR with 4bullet cams running an have ordered 2 zmodo wireless bullet cams an was wondering if u new weather or not if the new cams would auto pair upon power up or is it more to it or is it even possible thanks
I HAVE SPECO CAMERA VIP1D1 POE IEEE802.3AF ONVIF SUPPORT WILL WORK THIS NVR ?
Good job
what do you mean by "bomb" when use hdmi? use the term that consumer understand please
very good; detailed on most. !
ขอบคุณที่ให้รับชมเพื่อศึกษาครับ
Thanks for the instruction.
Assume I already have four IP cameras (the IP addresses of which I already know) working over WiFi at home. Would this device recognize those cameras (without any physical ethernet connection)
Hello I have a Dahua NVR with 4 imou S41fa poe cameras connected to the nvr in poe. I would also like to connect my cameras with the imou life application but it does not work.
GREAT VIDEO MY FRIEND
rushing to install the HD without stating a certain series; Orange WD drives or just any pc HD ? years ago with my DVR; I had to have an orange series only. ???
they all work. With cost cutting, some drives are not designed to be continuously on like the older 5year warranty drives. Best to get the drive that is designed for surveillance but even those fail at times.
Am I correct is stating that you have imported the cameras directly, as separate cameras rather than sub-channels under the NVR (which is how I did it) - which is the correct approach in your opinion? Is it possible to alter what I've done if it's not the correct/optimal approach?
i only know the way i showed so cannot comment on another method.
Informative video :) keep it up
LOL. As far as I have one, actually it's a 4.0 version, it's a crappy system, full of problems that you will find out once you've set it up. Mine is a nightmare to adjust and fix. The video floats, freezes, skip frames, jumps ahead, speeds frames and suddenly images vanish and you will never recover them in certain frame spots. Incredible hard to fix these faults. Then there is no decent support, live chat, etc. It's all questions and answers (you type in, or select a question and a list of answers that suits you appear), but they are not answers that you wanted to know, just crap they think you need to know. They're not telling you why live video freeze and speed up, e.g. like passing cars. Have you seen how cars suddenly increase speed and then slow down, or still-freeze on screen then immediately zip across to appear at the other end of the screen in an instant? How do you fix that? I've had my NVR for a year now and I've become sick of it, can't have an inconsistent recordings without the bulshit zip, freeze, float, stick and vanish, etc., not to mention when events are tripped, there is nothing shown on screen that you can click on to view the recorded event in Playback. You have to have a mobile App for that, unlike Hikvision that is better because whenever there is a recorded event there are numbers on the top right corner of the screen, e.g. one recorded event you get a number 1 on screen, 2, 5, or more recorded events, you get 2, 5 or more numbers. Easier to view as many recorded events in Playback by just clicking on the numbers and a list of recorded events appear. Whereas, this rubbish Dahua hasn't even got a simplified way to get to recorded events on PC screen. 🤨
is there a full manual online anyplace for the Dahua NVR7216-8P or 7208-8P? I can find all the others except that one everywhere i've looked online. Anyone know where I can download that one? Thanks
What made you go for Dahua over another brand?
cheaper in South Africa than Hikvision, no other reason
@@ecologicaltime thanks
you don't open screws, you removed them....2:59
Hello, thank you very much for the explanation, I have a question, I have to be connected to the same internet network as the cameras from the pc to access the ip 10.0.0.250? and some of the screens are black and come out with a sign of question (?) mark in red, do you know why? greetings from Chile :)
hey man, thanks for your time on making this video, it’s been helpful, would you recommend an NVR that be reliable and also able to use an smartphone ?
thanks. Hikvision.
can i use this with out internet connection ,,?
Thanks Pro No purple Hd ??? for recording
nice
How is the noise level? I read that Dahua nvr's have a exterme high noise level or is that only on the models with 2 fans (power supply and case)?
Nvr signal is digital, isn't it? Maybe it is the DVR version that have that problems.
fan noise is present.
Big case tiny board, appears cheaply made. Are the Dahua NVR's reliable in your opinion?
They not my best NVR. They do the job for the most part. I have had issues with some NVRs though.
@@ecologicaltime what are the nvrs you would recommend then?
I have a Dahua XVR5, hardware version V1.0. I'm trying to set up email notifications when motion is alerted on just one camera but I cannot figure out how to set up GMAIL as the email server. When I test it I just get ERROR without detail. Help if you can.
How can I lock a certain channel ( e.g: channel 4) , but keep the other 15 channel display on the screen.
The one channel has to be under a password lock and only someone with right certifications can open and view the feed
Is it possible.
Thanks
Should be a WD purple HD...for 24/7 surveillance recording...
Should be careful about the hd...static electricity might damage it..
I would appreciate a video on how to change IP address for the cameras..
ruclips.net/video/jVzDtU17lQM/видео.html
Great vid and a bit of a long shot question but I've been struggling for 3 weeks now. The upshot is I cant access the cameras via Webservice as they use a 10.1.1.x IP address, whereas the IP address of my network is a 192.168.1.x (router and NVR). The switch IP (and gatway is 10.1.1.1) with subnet 255.255.255.0 I tried changing this to 192.168.1.x but then get the clash message you displayed. Any thoughts on what I'm doing wrong here?
ruclips.net/video/PAzXoxyRyRo/видео.html
ruclips.net/video/tLH7fMSDcYo/видео.html
@@ecologicaltime Thank you
Excellent video!
Question: What software do you use to manage the NVR remotely?
Thanks!
Dahua have an app
smart pss
@@kuatesx2 Gracias!!
Thanks for the detailed video. Is it possible to remove or reset the pattern lock and just use a username and password if you change your mind and want to be more secure after initial set up?
on my firmware version yes i can just use password.
i have the same brand I bought,i did reset cause I added 1 camera infront of my terrace and it last ,last week I cant back my camera on my monitor it said the monitor log in was ended up. I make all the settings are good, all I gues is that the IP addres was unconnected... what should I do sir please help I had 6 cameras ive installed and now their not working.
if you reset it you must re configure the TCP settings. Check your IP address and Gateway of your NVR
@@ecologicaltime ok sir.thank you so much
mistake; was a purple drive 64 meg cache; 2T. so maybe now its open to any type ??
Can technically use any HDD but.... anything except a dedicated security drive is looking for early HDD fail or system slowdown and event total failure
First, thank you. I was able to initialize my NVR5216-16P-4KS2E and upgrade to current firmware. The new firmware does seem to be different than the firmware you used in your video making some of the changes after moving to the web browser harder to follow. Any plans to update this video using current firmware? Thanks again.
thanks i must update this video.
looking like you have a keyboard vs. a mouse to get in the pW that quick. the onboard screen kb is a pain !
Very informative... I followed the steps...when trying to add camera in registration, they don't appear automatically but when I try to add manually giving the IP of switch they appear and all show up as active but when I try to do a live preview from web version, it opens a new page which timesout after some time. When trying to view by connecting to app it doesn't show the live view either. My setup is - I have a modem from which a WiFi router is connected. Ethernet cable in the nvr is connected to the wifi router lan port. I have DHCP enabled while configuring which allocated the IP address similar to what is of wifi router. Modem to router requires a PPPoE user name and password and IP as part of PPPoE is dynamic allocation..not sure where am I doing it wrong
HI. Your default gateway on the router is 192.168.1.1 and then you changed it as shown in your video. Meaning there will be no conflict of changing default gateway and may change it anytime a customized gateway???
you can use any gateway address as long as that gateway address is your router's IP address.
router gateway of router. I have 3bb service. No info of how its programmed. How to know if dhcp is ok or static is needed ?
Very detailed and informational. What is the link to your video that shows setting up NVR to POE switch?
what about port needed to be open ? you skip that part
What great videos you have. Glad I found your channel. Cannot log into my camera from a computer. I can log into most by clicking the internet explorer “e” but one in particular just hangs. Is there a way to log in from the nvr directly? My nvr is on a 10.x.x net and my router is on a 192.168.x.x net so i can’t just enter the ip of the cam into a computer.
I can’t change the day to night time without accessing the cam firmware directly. Help please and thanks for these great vids
For more control set up SmartPSS
@@ecologicaltime thank u. Any idea why this happens:
I select a compression of h265, and smartcodec and a desired bitrare, and click ok, the next time i go back to that camera, everything i have selected has changed?
I want to keep h265, but some cams keep changing to H264b or mjpeg without me ever choosing that? (I even tried disabling smart.codec, and stopping all recording when making the changes)
Thanks in advance
comforting to hear the hdmi craps out after a while. Good quality! Why not have multiple hdmi ports ! Along with dual USB for a keyboard also ? local importer to unlock= yeah right. They can' t even speak English to understand what I"m asking !
if you registered your product and used an email, you can use that email to unlock your device in future and email directly to Dahua.
can conflict with phones, android box if left as dhcp vs static ?
if its DHCP it wont conflict as DHCP server will allocate a new ip address if there is a conflict.
Which is good NVR or DVR?
Hikvision
estou com 5 delas e um NVR 1004 da Intelbras que so reconhece uma na rede wifi , as demais foram adicionadas da mesma forma via wifi mas não aparecem nem mesmo na busca , e sao todas no padrão ONVIF , e o DVR ja esta no modo de operação IP . quero sair dessa marca que so me deu prejuizo e nao fuinciona por mais de 2 anos . estou buscando NVR NAS ou NVR simples como esse da mesma mardo do aplicativo XMEYE que faço login e vejo pelo celular.
Thanks
Thanks for the HDMI warning.
Where are you based
How do you reset that model without a monitor? (please I need help)
hello.. I have a question. If I have a 5MP wireless IP Camera, and I want to connect it to the NVR which come in bundle with 2MP IP Camera, will it work?
if the NVR has the bandwidth available, then it can work. Most NVR can handle higher res camera but if you put 5MP on every port then you will probably exceed the bandwidth and some cameras wont work. So you can mix your cameras, some 4MP, some 2, MP some 5MP
what color coding did you use in lancable camera?
EIA568B - en.wikipedia.org/wiki/TIA/EIA-568
This guy likes mesuring 😂😂
#Liked 👍
I have a Dahua NV$ (White one lol) and I cannot get it to record
A great video, thanks for taking the time. Wondering if you wouldn't mind answering a question for me regarding IP addresses. The internal address of my router is 10.1.1.1 so I'm trying to update the IP address of the NVR to 10.1.1.250 however when I click on OK I get the error "Switch and the device shall not be ...." - the subnet is 255.255.255.0. When I go to the Switch settings I notice that the IP address is 10.1.1.1, the default gateway is 10.1.1.1 and the subnet is 255.255.255.0. I'm not sure what I should be changing to get the NVR visible on the home network. thx in advance.
thank you. yeah some of the Dahua NVRs do that. Just ignore it. Or change your subnet to class A. 255.0.0.0
@@ecologicaltime thx for the reply. I ended up leaving the subnet as it was but changed the IP addresses for the switch and default gateway, and after that it let me update the NVR and router address just fine. All good now.
@@ecologicaltime 255.0.0.0 is not a class A subnet it is a \8 subnet 255.255.0.0 is \16 255.255.255.0 is \24
The class A IP address range is 1.0.0.1 to 126.255.255.254 hope this helps
Am having problems setting up 2 poe switches with 16-channel dahua NVR and cameras, some of the cameras keep going off and on with an error message that(can't find host). pls any help?
might be IP address conflict, two cameras have same IP address. I have a video showing this in my Dahua playlist
Is it possible one camera on local network record by 2 nvr at the same time?
yes, just map the camera to both NVRs
But you will get the skipping in frames at any one Dvr, You have to choose different Stream for both NVR for proper recording.
Why am I not be able to see the live videos while am out side from home. All 8 channels are visible within home wifi surveillance 🤔!!Though my mobile is supported by data network while am away from home still the problem persists..Any clue you can provide me inorder to solve these issues?
please watch my video on remote view setup, its in my playlist: Dahua
Thank you.....
How about a movie on updating the firmware....
good luck with that. The firmware sometimes works, and sometimes it stuffs it up. Personally, if the NVR is working, leave it.
@@ecologicaltime You are 100% correct!
I downloaded V2.02; installed and BANG! Now nothing works.. Even tried to restore the computer. All I have now is a very damaged program.
P.S. I did watch your movie on updating - will never do that (updating) again!
I found version V1.6 and have installed (nothing to lose so I went for it) and that is working 100%.....
Maybe I should have done that first and I am sticking with it - no way am I going to try installing that V2.02.... ;)
I was actually looking for updates for the PSS - ended up with a program.....
Awesome job with the video. But i am still stuck. I have a google wifi mesh connected to my switch and a montavue nvr connected to my switch with HIKVISION cameras connected to the poe nvr. However the nvr does not pick up the cameras and i can not seem to access the cameras directly either. Do i need to change the nvr to HIKVISION or did i miss a step? All cameras are connected via poe. Thanks!
You should see the Hik cameras in the list however some NVRs wont show the video feed
Good vide bu way too many adverts to skip
thanks
How do I hard reset this NVR? I have adjusted the resolution and now its saying no signal. I am yet to connect it to the internet also 🤦🏽♀️
Lekker!
Hi, nice video, but we have a problem. We connect all of our cameras and only 2 cameras are constantly working and showing picture. But we can't detect other cameras, only sometimes, and they tend to go offline and come back online all the time. We tried changing the IP adressess and everything but nothing happens. When we try and "device search" the cameras nothing happens. And they are all connected. Can you please help?
I have a problem with some of the cameras.. they say "can not find network host"?
You have not configured the network settings correctly. Are you able to log into each camera directly via a web browser?
I got an issue , all 6 cameras in the UI show invalid username and password, did factory reset, correct password but no luck...in camera registration I can see all 6 cameras as they were previously added but status is red , Dhcp is enabled.
Not sure what's going on , I am not getting enough support... please help
What is the price of it
DSS-PRO any one know how to set ddns on this platform ?
😍
BUON GIORNO VEDO CHE SEI PRATICO A ME NON MI ESCONO LE TELECAMERE LI AGGIUNGO MANUALE MA IN PC PICCOLINO MI ESCE UNA CROCETTA ROSA MA NON SI VEDONO COME MAI
He said "I'LL BE BACK"
Good vidéo ,but i have one issue :
I have two nvr dahua 16 poe integrated switch and 30 caméra dahua poe,i reset them and i assigne IP adress for nvr 192.168.1.10 and 192.168 .1.11,
For caméra dahua i assigne 10.1.1.100 to .130.
But why when i restart NVRs ,they restore IP adress from 10.1.1.65 and incrément value to 66 and 67 ....etc.?
Thanks for your support.
I m using web to configure IP directly
Are you saving the settings after you set the static IPs?
yes as Linwood said and after changing one camera did you check that it now works on the new IP address?
how does anyone know the ip ssettings on my network. I can make up any number / series.
i can see my router I/P address thru config ? ip 4 etc. for default gateway. ? ? Vague if you have no idea how your IsP router is setup.
from your PC, go to CMD prompt and type: ipconfig
you will see your ip adress.
In Windows 10 you can also go to settings->Network&Internet->Properties
Can I record without internet
yes
ขอบคุณครับที่แนะนำการใช้งานมาให้ทราบ
Wayyyy to complicated for me. I'll just get a guard dog instead
Sir how to connect dual monitor in dahua nvr
A few corrections should be made:
1. Whilst a WD Red "NAS" Drive may work, you ideally need a Purple Drive.
2. The unit is an 8 channel, not 16 channel. A 16 channel NVR requires 2 HDDs.
please see that Dahua have 16Ch with only 1 sata drive port.
dahuabd.com/product/nvr-4116h/
Can someone point me to the latest firmware for IPC-HDB3200C?
be careful upgrading firmware. make sure its the correct one exactly. I have had issues where firmware updates ruined my NVR. Not even the dealer could resolve the issue.
Your ip address that you setup 10.0.0.250 how do you find it? Is your local ip address?
i chose that when i set up my NVR
It is such a great explanation. I would like to ask you 2 questions if you do not mind. May I contact you by email please?
no email. ask please
@@ecologicaltime I am looking for a camera coaxial or IP with external microphone and speaker ports pleease