Good video man, Pburg from Atlanta here. With the green DRL's and I must say they are great headlights. One thing I didn't agree with were the very light scratches inside and even scuffs or just not clean back there, for me to reach and clean. Inside the housings. So making the light catch more through the plastic. I was able to see it on yours too. I said to myself, they just come like that then. Again, I do enjoy my product but can always be a little more looked over, you know? I would like to say again, great presentation.
Hi it is all me Crawford. I am also glad that our customer did this install video for us. We would for sure be creating more better headlights for our bike friends :)
Right after I did allllll this, and even more.... like, opening headlight, mounting morimoto, mounting smd halos, gluing headlight back together and testing it, I realize that I just mounted the morimoto hid projectors with the solenoids up side down. :):):) Instant breakdown in tears at 5:14 in the morning.
Update: Please look at 10:55, the resistors would be still needed, we include them into the box for necessary use if you modified your turn signals to aftermarket LED turn signals. Please be noted, thanks.
Hello mate I can see at the last of the video that the position light (center light) is off and I have that problem, I don't know where tu plug the cable and Im searching all over the internet where I should plug it and haven't found any answer, do you know where is the right place to plug this cable? I will be very grateful if you tell me thanks.
I installed the same headlights on my 2006 r6 everything works great except the turn signals. When I turn on the indicator the lights stand still it only flash when the engine is off. Do you know a fix for this problem?
Hey In the 12:30 to 13:30 section, my kit did not come with a switch so I am going to buy one but how does the switch get power if there is only two wires from the switch and then only the white/blue wires from the demon eyes. Are the blu/white wires already powered or is there more wires for the switch??
Is there a fix for the wire if it disconnected from the ballast? When I was trying to ground the bike it came out and won't stay back on. Also when you spliced the switch with the factory switch, what are you talking about
Hello, if the wire is broken from the ballast, you'd better change a new ballast. And for the newer R6 V2 headlights, we directly add a handlebar switch to the wiring harness so that no need to spice the wire, just hook it up on the handlebar position it will be okay.
@Led Headlight hey so I connected every thing but my demon eyes only comes on with the signaling light, and it blinks. The hi/low beam lights don’t work. Where am I doing wrong?
@@olson5252 Hey buddy I figured it out right after I posted that comment lol. Switch the low and high beam connectors that connect to the bike. That fixed everything for me.
@@DrCaptainObvious I got it figured out my ground wasnt working properly.. also does the power button turn the demon eye on and off? Mine doesn't work, wonder if anyone gets pulled over riding around with that light on .
Hey what's up boss I'm trying to follow through with the video on an installation but I'm lost around 12.30 to about 13.30 not sure what wires to splice?
Hi, it is about installing the low beam on/off switch on the handlebar position, now the newer relay harness is directly with handlebar low beam on/off switch I guess, if so you can ignore this step. Thanks.
Led Headlight Hey a am also lost around this point. I have the V2. My low/high beam do not turn on but everything else is working. What can be the issue?
@@ericwashington527 I ended up having a bad wiring harness. I contacted ktmoto and they shipped me a new harness and also spar HID bulbs for the inconvenience.
I can’t seem to get the headlights to turn on....my turn signals work but not the low beams or high beams.. everything is connected like the video said.... please help
Hi this is the whole headlight assembly, just unload original headlight and directly replace this headlight assembly, no need to crack the old light case to fit, thanks.
is there a troubleshooting guide? i paid the dam shop 4 hours to install them and they say they are defected....when bike turns on (first mode)its in high beam but just 2 lights no brow on, turn signal will flash amber...now when i flip my high beam switch on the brow and 2 lights will go on but when i put signals on the brow will light amber solid no flash..i get no low beam and no demon eye on did they wire it wrong? oh also my flush mounts dont turn on when signaling
Sorry to hear the issue, so where did you buy the headlights? You can directly contact the customer service for help, they would always help till the issue get resolved. We don't go check RUclips news very often, we talk on FB or the platforms like ebey, amazon directly.
anyone have any idea to splice the turn signals? Do i just connect it to all the wires or is there one specific one I connect it to? Having trouble with this a little bit. Thanks!
In that case we have to add one more toggle switch, or if you don't want to light up the opticals all the way you can cut the relative wires to disable them.
Hi i have a Yamaha R1 rn12 with one built in projector and I intend to modify it and install a projector where the high beam reflector light is,my question is do i need a wire harness for the high beam projector ? ruclips.net/video/juX-dORXpSA/видео.html
All i needed was a video to get to the third eye, this helped so much, THANK YOU!!!
Good video man, Pburg from Atlanta here. With the green DRL's and I must say they are great headlights. One thing I didn't agree with were the very light scratches inside and even scuffs or just not clean back there, for me to reach and clean. Inside the housings. So making the light catch more through the plastic. I was able to see it on yours too.
I said to myself, they just come like that then. Again, I do enjoy my product but can always be a little more looked over, you know? I would like to say again, great presentation.
Hi it is all me Crawford. I am also glad that our customer did this install video for us. We would for sure be creating more better headlights for our bike friends :)
Right after I did allllll this, and even more.... like, opening headlight, mounting morimoto, mounting smd halos, gluing headlight back together and testing it, I realize that I just mounted the morimoto hid projectors with the solenoids up side down. :):):)
Instant breakdown in tears at 5:14 in the morning.
Update: Please look at 10:55, the resistors would be still needed, we include them into the box for necessary use if you modified your turn signals to aftermarket LED turn signals. Please be noted, thanks.
Damn that’s a lot of work
do you have an install guide for the V3 cuz i can’t find one
im having the same issue.
@@Joking_Misfitzsame
Soooo where did he put the ballast?
Hello mate I can see at the last of the video that the position light (center light) is off and I have that problem, I don't know where tu plug the cable and Im searching all over the internet where I should plug it and haven't found any answer, do you know where is the right place to plug this cable? I will be very grateful if you tell me thanks.
Is t necessary to take all the wires out or can you just unplug them and put the new headlight housing in and plug them itb
So much better then stock.
Just got a r6 with these lights, turn signals work but not the actual running lights
i am having issues with the V3... i cant get anything to work and it did not come with a user manual!
How do you adjust the headlight mines pointing really low to the ground
I installed the same headlights on my 2006 r6 everything works great except the turn signals. When I turn on the indicator the lights stand still it only flash when the engine is off. Do you know a fix for this problem?
Hey! Have you tried to swap from xenons to led bulbs? Just wondering if that is possible and what need to do with the wiring harness if that so.
Hi friend,we have the V3 version is full LED headlights.
what temperature are these builds? they look sickkk
Hey In the 12:30 to 13:30 section, my kit did not come with a switch so I am going to buy one but how does the switch get power if there is only two wires from the switch and then only the white/blue wires from the demon eyes. Are the blu/white wires already powered or is there more wires for the switch??
are you still offering support for these headlights? I'm considering purchasing them for my bike.
Is there a fix for the wire if it disconnected from the ballast? When I was trying to ground the bike it came out and won't stay back on. Also when you spliced the switch with the factory switch, what are you talking about
Hello, if the wire is broken from the ballast, you'd better change a new ballast. And for the newer R6 V2 headlights, we directly add a handlebar switch to the wiring harness so that no need to spice the wire, just hook it up on the handlebar position it will be okay.
@Led Headlight hey so I connected every thing but my demon eyes only comes on with the signaling light, and it blinks. The hi/low beam lights don’t work. Where am I doing wrong?
Dude same! Can you please tell me what you did to get it working? It's driving me nuts.
@@DrCaptainObvious Same here :(
@@olson5252 Hey buddy I figured it out right after I posted that comment lol. Switch the low and high beam connectors that connect to the bike. That fixed everything for me.
@@DrCaptainObvious I got it figured out my ground wasnt working properly.. also does the power button turn the demon eye on and off? Mine doesn't work, wonder if anyone gets pulled over riding around with that light on .
@@olson5252 Yeah the switch controls the demon eyes for me.
good guide order my light last week I will try do a video on the install quick question couldn't you hide the wires a bit better ?
Glad to hear this video help,normally,we would hide the wires on fairing and use zip tie to fixed it.
Led Headlight My light got delivered today and it’s damage send message and photos no reply from ktmoto don’t know what to do
@@R6Boss Sorry to hear the issue you met.We don't go check RUclips news very often,so please contact us on the eBay/FB or KT official store.
Hey what's up boss I'm trying to follow through with the video on an installation but I'm lost around 12.30 to about 13.30 not sure what wires to splice?
Hi, it is about installing the low beam on/off switch on the handlebar position, now the newer relay harness is directly with handlebar low beam on/off switch I guess, if so you can ignore this step. Thanks.
Led Headlight Hey a am also lost around this point. I have the V2. My low/high beam do not turn on but everything else is working. What can be the issue?
@@KidCannon4407 did you ever get a response? I’m lost too.
@@ericwashington527 I ended up having a bad wiring harness. I contacted ktmoto and they shipped me a new harness and also spar HID bulbs for the inconvenience.
I can’t seem to get the headlights to turn on....my turn signals work but not the low beams or high beams.. everything is connected like the video said.... please help
Ever get it to work? same trouble here.
olson5252 yeah I just had to turn on my bike 😂
Does it come inside the case or do you have to bake and crack your old light case to put them in?
Hi this is the whole headlight assembly, just unload original headlight and directly replace this headlight assembly, no need to crack the old light case to fit, thanks.
is there a troubleshooting guide? i paid the dam shop 4 hours to install them and they say they are defected....when bike turns on (first mode)its in high beam but just 2 lights no brow on, turn signal will flash amber...now when i flip my high beam switch on the brow and 2 lights will go on but when i put signals on the brow will light amber solid no flash..i get no low beam and no demon eye on did they wire it wrong? oh also my flush mounts dont turn on when signaling
Sorry to hear the issue, so where did you buy the headlights? You can directly contact the customer service for help, they would always help till the issue get resolved. We don't go check RUclips news very often, we talk on FB or the platforms like ebey, amazon directly.
Will these fit a 2004 year model?
No,please contact cclightings@gmail.com
anyone have any idea to splice the turn signals? Do i just connect it to all the wires or is there one specific one I connect it to? Having trouble with this a little bit. Thanks!
great video dude, do you know if theyll be any problems with mot pass ?
We'd suggest the ones without colored demon eyes if you worry about it, thanks.
Is it normal for the indicators to blink that fast or is that a mod you have done?
Hi, yes he had done the mod of aftermarket turn signals, normally with halogen turn signals, they would not blink that fast.
Okey thanks, so just by changing headlamps, the turn signal will stay at normal blinking speed?
Yes if it is original halogen turn signals.
Which size of projector will fit in yamaha r15 v2
It is 2.8 inches, if include the angel eye, it would come to 3.0, thank you.
Would it be possible for just the demon eyes to be on without the opticals is that possible by any chance?
Hi bro, do you mean you wanna disable the opticals instead of removing them?
Led Headlight Well is there a switch where only the demon eyes are on and no optical are on just demon eyes
In that case we have to add one more toggle switch, or if you don't want to light up the opticals all the way you can cut the relative wires to disable them.
Led Headlight ah okay and would that be extra cost if I wanted that toggle switch?
Free for you, only we should confirm with it, as it is hard to reverse if we put that extra switch.
One of my grounds don’t wanna work help pleaseee
Hi,sir,please describe your detail issue and attached some pictures of the issue to email info@ktmoto.com
you have to change your flashing light relay
Not really for the newer ones, we improved the integrated turn signal function.
Led Headlight oow niceee
always disconnect the ground first
Yes,sir,if there any questions just feel free to contact us on www.ktmoto.com
Wat do I do wit high beam red wire
Hi bro, do you mean how to connect the high beam? It is plug and play, just find out original high beam plug, then plug the connector in.
Your bike as mine is lowered for 5 cm yes?
I think it is okay.
18:58 *Decepticon!*
How do I now if I got the new v2
So you mean you purchased one from us? Just go install it.
Led Headlight I bought it on ebay
How do I get the resisters
Big help
Glad to hear it help.
🙂👍
Please let me know guys
Hi i have a Yamaha R1 rn12 with one built in projector and I intend to modify it and install a projector where the high beam reflector light is,my question is do i need a wire harness for the high beam projector ?
ruclips.net/video/juX-dORXpSA/видео.html