How to Replace Spindle Bearings in your Lawn Tractor Cutting Deck -Complete Step by Step Demo
HTML-код
- Опубликовано: 5 май 2023
- Join me as we replace the Spindle Bearings in the mowing deck of my 1999 Scotts Lawn Tractor! I will give you a complete and thorough step-by-step walk-through, so that you too can do it yourself.
Here are the part numbers and links to the products used in this video.
Lower (smaller) Deck Bearings Rotary # 8831 (JD # AM122119, MTD # 741-0155) amzn.to/3HJ8hnI
Upper (larger) Deck Bearings Rotary # 8861 amzn.to/428jfvi
Bearing Replacement Kit for Spindle 92574 (includes both bearings, spacer, and lock nut) amzn.to/3LY5HNg
Thanks for watching Buck's Small Engine DIY, Putting the "Do" into "Do-It-Yourself"
Want an Official Buck's Small Engine DIY Sticker??? Send me an email with your name and mailing address at buckssmallenginediy@gmail.com, and I'll send you a sticker absolutely free! 
Хобби
Great presentation.. After watching your vid, I removed the 4 bolts holding the spindle which let me remove and install the bearings on my workbench, just a little easier. Thanks for the vid though that saved me $80 over buying a complete spindle vs 2 bearings
A great and detailed repair video, seeing the blades of the lawn mower spinning again is really uplifting. If you need any small engine parts for the lawn care equipment repair, just let me know and we can work together to help more DIY repairers I believe. We are here to help them source the parts they need easier and more affordable.
Thanks. I've had some decent results with HIPA products.
I have the same deck. I just checked it today.
I also have noisy bearings. Your video was great, 👌 thank you very much I will replace the bearings the same way. 👌
Thank you, and good luck!
Very good presentation
Great video, and very helpful for all of us do it yourself folks! Just a couple of things I thought I should mention. A Ball Pean hammer is a much better choice for striking any chisels, as it is not nearly as likely to chip or splinter, as it is hardened; and you don't want any pieces hitting you in your eyes or face. Also, I don't know if you had safety glasses on or not, but make sure to wear them when spinning any kind of wire wheel. Those wheels can release wires or debris, and that can be dangerous. Keep up the good work!
Thank you!
I've had the same ride on since 1994. But its a simple 12 hp Briggs MTB. I've rebuilt the trans once, then replaced with a used one. New set of tires. and replaced spindle bearings every two years. I have 2 acres of jungle area and sharpen the blades every 6 to 10 hours (like knives). Forget about looking up bearings numbers online, There are too many spindle variations . Just pull the spindle out and leave your deck attached to your mower. Rebuild the spindle in a shop vise. Record the bearing numbers and stock up. 6204 2rs (rubber seals) for me
Thanks for the note and the tips. I really like this mower, and I might pick me up another one here shortly....
Thank you for the video I gotta try that on My Tractor Just starting to make some noise
Good job with the repair but you forgot to use NEVER seize on the pulleys. NEVER forget to use NEVER seize. 😊👍🏿
I agree and I use it everyday
It’s common for the smaller 6203 on top under pulley and larger 6204 next to blade
Removal of inter brging covers towards each other and use grease gun to fill
I use a 8 lb sledgehammer and brace with 4/4 blocks under deck
Several hits does it
It’s a every day thing in shop
Just remove the inside seal cover and use grease gun to fill it
Some has 6203 and 6204 , others 2 of the 6204
I saw zirc fittings on the bottom of both of your spindles. You could have used that grease gun on those zirc fittings and your bearings would not have worn out.
Hi. One of my rear wheels is squeaking loudly. It is so loud I can occasionally hear it even while I'm mowing over that noise. Now I wonder how much stuff I have to take apart to get to that. I imagine it has these same type of bearings around an axle, but not sure.
Pretty odd problem. And I don't know the answer. Is it a gear driven transmission or hydrostatic? That may not make any difference. I would start my analysis by getting the rear end of the tractor off the ground, turning the wheels by hand, and just trying to specifically identify the source of the noise. Axle bearings would be inside the transmission housing, I would think. From the outside you can just access the axle seals. Maybe the noise is one of the idler pulleys? You're just gonna have to get under there and find out what's going on. Let me know what you find out..... PS, do you still have your Rexhall RV?
Where can I go to gets parts diagram for the murray riding lawn mowers.i need to order axle bushings for the front tires.thanks
In my case, I googled "Scotts 42589x8," which is the make and model number of my tractor. From there I used ereplacmentparts dot com, or partstree dot com to look at the detailed diagrams and parts lists for my tractor. Then, you can either order from those sites, or you can jot down the part number and search for it on ebay or amazon. Good luck!
Skip looking for mower parts. Either mic the bearings or take them to a bearing retailer locally. They'll mic it and hand you the matching bearings.
Ah, no way. I now do 99.9% of shopping for mower parts online. I've wasted too much time and gas running all over the place looking for parts locally, only to find out they don't have it. "We can order it for you," they always add. I say, "No thanks. I can do that myself."
How can the sleeve go that way and have a Pugh too for the pulley?
I apologize; I am unable to discern what you're asking....??
Best to remove the inside bearing covers and then the grease gun will go into bearing
Both pulleysbare bent.