AWESOME! I love the finished product and you should try some more geometric and angular patterns and I was also wondering what kind of tumbling medium you used?
How much would it cost to make my asada bassicly the same way except the scale a little lighter and the blade dark lol and that back spacer is awsome with that rocky affect I also have the kershaw static but I don’t think there would be a way to customize that one
First! Ha!😂 Thank you very much, I'm still new to the RUclips world but with support from you and other's I'm sure the numbers will grow! I'll just keep bringing you guy's more content! Appreciate it! 🤜💥🤛
Hey man I have a idea for you. You should design and make a pocket tool. Pry bar with some other things. I would like to see that video! It’s got to be able to open boxes too!
Nice! I'd charge between $110-$150, depending on the material being used. Unfortunately I don't customize Gerber knives anymore, they don't come apart easily.
Hi. Another great one. Love it. I finally did an etch and stone wash on my Civivi Baklash. I was nervous i would ruine it but i am pleased with the result. I put a photo on instagram at haggisman54 if you are interested. All the best and thanks for giving me the confidence to try.
@@KnathansKnives No problem, it happens at the worst time. I have same problem with easy words like "enough", draw a complete blank the time I need to write it....uhhh enuff..no...enuf...no...damn it enough! Lmao
I don’t like this type of knife, but I really do love what you did to it, it’s art man.
Thank you very much! 🙏🙏🤜💥🤛
I dig it. Adding a lot of value to budget stuff.
Thank you! I can't wait to get started on the Pilar iii, hopefully I can get it to Giant Mouse status!😁😎
Beautiful rendition of the knife man!
Thank you very much!
Amazing! At first I was skeptical about putting the Rocky finish on the handle, back spacer, and the spine of the knife, but it looks phenomenal!
Thank you! That thought always goes through my head! 🙂
I usually do a test run on some cheap G10.😁
Man! I love all those shades of grey and that carbon fiber scale is gorgeous!! 🙂✌️❤️
Thank you brother! 🤜💥🤛😁
Now that is a beauty makeover! 🤤👍
Thank you very much! 😁🙏🙏🤜💥🤛
@@KnathansKnives 👍
Really nice customization.
Appreciate it!🤜🤛
It is great. The finish you did to the scale, to the blade and the spacing you put in make it look amazing. Excellent job.
Thank you very much! 😁
That looks great! What a difference. It went from generic to gnarly.
Thank you very much!🤜💥🤛😁
When I get my flatiron I deff want to get it modified like that
Turned out great! Nice attention to detail.
Thank you, truly appreciate it! 🙏🙏🤜💥🤛
Definitely another awesome job. Love the back spacer and the blade finish is really stellar. Great work another awesome project.
Thank you very much! 🙏🙏🤜💥🤛
Amazing! You should start making customs and you'd make tons of cash! Excellent work, dude!
Ha! Thank you!😁 One day maybe my own brand!🤔
@@KnathansKnives PLEASE!!
Beautiful! The colors really work well together. Like you said, the flow of the knife is awesome! Well done brother!
Thank you! GL on the GAW! 🤜💥🤛
You do great work
Thank you very much! 🙏🙏
This is my favorite one so far! Looks amazing!
Thank you very much! 😁🙏🙏
Excellent work👍
Thank you!
Looks cool 😎
If I send you my Asada how much would you want to do the exact same to mine? Awesome job brother!
Email me(contact@knathansknives.com) and we can go from there.🙂
Killer job man, keep up the great work! 🔥
Thank you very much! Will do!🤜💥🤛
Great video!
Thank you! 🤜💥🤛🙂
This looks awesome!!!! I would like to get mine done the exact same way, can you give me an idea of how long and what it would cost me?
Thank you very much! Unfortunately I don't customize Gerber knives anymore since I've had a lot of issues in the past.
Another unbelievable job. Entertaining and educational. I know the video is 18 minutes but how many hours go into a project like this.
Thank you very much! 🙏🙏
I'd say this knife took somewhere around 9-10 hours, give or take.😁
AWESOME! I love the finished product and you should try some more geometric and angular patterns and I was also wondering what kind of tumbling medium you used?
Thank you very much! 😁
I used small and medium sized ceramic pellets for the tumbler.🙂
just subscribed really great job bro
Thank you! I really appreciate it!
Another awesome mods Nathan
Thank you, appreciate it!🤜💥🤛🙏🙏
How much would it cost to make my asada bassicly the same way except the scale a little lighter and the blade dark lol and that back spacer is awsome with that rocky affect I also have the kershaw static but I don’t think there would be a way to customize that one
First of awesome work ❤️.
How much does such a knife cost ?
How thick is the aluminum plate that you used ?
Thank you!
I used 3/16 thick aluminum🙂
Просто супер!!!
Благодаря ти!!🙏🙏
Yay I got here when there was 0 views and 0 comments! As usual you did an amazing job and I have no idea why you don't have more subs!
First! Ha!😂
Thank you very much, I'm still new to the RUclips world but with support from you and other's I'm sure the numbers will grow! I'll just keep bringing you guy's more content! Appreciate it! 🤜💥🤛
Hello, I emailed you a question so If you could look at that It'd be great. Keep doing what you're doing soooooo well!!!
Thank you! 🙏🙏🤜💥🤛
Hey man I have a idea for you. You should design and make a pocket tool. Pry bar with some other things. I would like to see that video! It’s got to be able to open boxes too!
I've been thinking about it! I'd like to make a prybar either out of copper or brass and add a pocket clip. 😁
Great video! You are very good!
I live in Italy, and i'love to send you my mini-ka to customize it! Is this possible?
Thank you! That might be a possibility, it's the shipping that I'm worried about.🤔
You should sell the scales alone bro. But what a talent
Appreciate it!
Do you sell parts...like I have this knife exactly and would like to have some of his done to mines
Unfortunately not at the moment. I create custom knives made to order, however my books are currently closed😕
I just got an Asada, how much do you charge for this to be done?
Nice! I'd charge between $110-$150, depending on the material being used.
Unfortunately I don't customize Gerber knives anymore, they don't come apart easily.
Why can’t I find your Instagram bro?
That's weird.🤔 It should be knathansknives
It would be nice if you would sell the scales and filler.
Just want to know 4sur u etched with forric chloride on the blade , pocket clip and extra piece
Correct! 😁
amzn.to/3NRE4VH
Cost? As I would like this done as well.
Email me(contact@knathansknives.com) and we can go from there🙂
FYI... Asada in Croatian (Bosnian, Serbian as well) means A sada = And now. It can be like a question or like an anouncment. :D
Thank you for breaking it down, I was curious of the meaning.🤜💥🤛🙂
@@KnathansKnives oh, I dont think that's what they had in mind. 😄
No worries, I'm sure they wanted to announce a better version of the Flatiron.🙂😉
can I get you to do the same thing to mine but OD Green carbon fiber
It's possible🙂
Sitting here wondering if I can do this with just a Dremel tool.🤔🤣
I think you can! Never hurts to try😁🤜💥🤛
Go for it man!
Hi. Another great one. Love it. I finally did an etch and stone wash on my Civivi Baklash. I was nervous i would ruine it but i am pleased with the result. I put a photo on instagram at haggisman54 if you are interested. All the best and thanks for giving me the confidence to try.
Hello! I will definitely check it out! Thank you!😁🍻🍻
Overtravel stop...lol
Ha! Thank you! It wasn't coming to me, I can't remember anything when the camera is rolling!😂
Appreciate it! 🤜💥🤛
@@KnathansKnives No problem, it happens at the worst time. I have same problem with easy words like "enough", draw a complete blank the time I need to write it....uhhh enuff..no...enuf...no...damn it enough! Lmao
Ha! The English language is a bit strange at times!🤔
@@KnathansKnives Thanks for that, I thought it was me being a bit strange...ha ha
No worries, I completely understand.😁