VW Touran - Fitting Towbar and Electrics

Поделиться
HTML-код
  • Опубликовано: 24 дек 2024

Комментарии • 18

  • @DevonDaggers
    @DevonDaggers 9 месяцев назад +4

    For a 2014 face lift model we found that the Grey and white wire was the fog light. Just sharing to help out anyone else as it took some tracing. PS, thanks for the video and diagrams

    • @rcweed4820
      @rcweed4820 9 месяцев назад +1

      Thanks man I'm about to take my 61 plate to bits and fit one

  • @zzs8646
    @zzs8646 2 года назад +1

    You saved me at least three hours with your video. I have done what you had shown and described and it works perfectly, altough I have a different type of relay, and some wire were coloured differently. Great job! Thanx from Hungary

  • @irmantasvanagas2060
    @irmantasvanagas2060 Год назад

    Thank You very much! I found it very helpful connecting wiring!

  • @timbo5244
    @timbo5244 2 года назад

    What woud be helpful would be listing the brand/type of tow bar, and tools/equipment used . Also wider shots?

  • @bikelife-ob3rw
    @bikelife-ob3rw 5 месяцев назад

    My relay is beeping on indicators is it suppose to do that and thanks for youre vidio really helpfull

    • @kitcarbuild3927
      @kitcarbuild3927  5 месяцев назад

      @@bikelife-ob3rw hi - the relays have a built in beep for indicators when a trailer is connected. It is a legal requirement to have an audible or visual indication when a trailer is connected.
      Glad the video helped.

  • @lincolnburns4996
    @lincolnburns4996 4 года назад

    Hi I have done all my wiring same as you. Just the teb7as is clicking when indicators but just no lights atoll at my light bar I've used 2

    • @kitcarbuild3927
      @kitcarbuild3927  4 года назад

      Hi Lincoln - sorry to hear you are having problems. Mine still works fine. Did you get your issues sorted?

  • @jameshardman1655
    @jameshardman1655 3 года назад

    Amazingly helpful, saved me hours of time. 👍

  • @Blaaggarding
    @Blaaggarding 2 года назад

    Good job but those connectors are the worst thing possible to use on any auto application they will always give trouble at some point . either solder or use durite connectors

  • @scottsabin2245
    @scottsabin2245 2 года назад

    I did what you have done but mine keep buzzing when the cars on

    • @kitcarbuild3927
      @kitcarbuild3927  2 года назад

      You must have a short on one of the indicator circuits - they are the circuits that use the buzzer on the relay. I hope you find the problem

    • @kitcarbuild3927
      @kitcarbuild3927  2 года назад +1

      You must have a short on one of the indicator circuits - they are the circuits that use the buzzer on the relay. I hope you find the problem

    • @scottsabin2245
      @scottsabin2245 2 года назад

      @@kitcarbuild3927 that’s great thank you will take a look

  • @benmathers6832
    @benmathers6832 4 года назад

    This is amazing, thanks so much for doing this! You might have mentioned this in the video, I haven't watched it all yet, but do you need to get the car reprogrammed or anything when using the bypass relay? Cheers

    • @kitcarbuild3927
      @kitcarbuild3927  4 года назад +1

      Hi - I didn’t have to reprogram. It works fine with just the bypass relay