None bose with factory amplifier will use this harness also same place. 2013-2015 none amplifier will have a green or tan connection behind the screen we have harness for that 2
Best Buy just attempted to install my new Alpine R series door speakers and amplifier. Also amplifier for my 2 JL audio subs. They had the car for 8 hours and I get it back with my front drivers speaker not working and none of the new door speakers installed. Amp and Lc7i installed but they butchered the factory harness into the amp. I'm hella mad!!!
Thinking about buying one of these for my 2016 chevy Malibu. I have been looking all over the web for something like this. Should look into listing this video on the Chevy Malibu forms, only thing that comes up on google.
this amplifaire box suport 4 apeakers or 6 speaker ??? my car is LT come with 4 speaker in doors I want to install other speaker to back side the car ... how plz help
Hello Unspoken ! thank you for your subscription ! we would love to have you . give us a call and we can talk about your plans and project to see if we can be the best fit for you !
The purple wire on the factory harness to the stock amp is for the anc, cut that and no more anc, I might try and depin that wire from the factory plug and test chimes, Bluetooth, etc.
I got a amp and hooked up in my 2018 impala. A metal object slid onto to positive a negative hook up and I think I blowed a fuseAnd I checked all the ones I thought it could be and I haven’t found a blown fuses or somewhere else I could check
What setup should I use for door speakers and tweeters, I'm thinking of a 12" sub or 2? I got a 2018 Chevy Malibu 1LT with 8 inch touchscreen without bose.
I hope you can help me out with my 2017 Impala I just want to add a 5 channel amp to power my interior speakers to boost the sound a little and put a set of 12 of kickers in the trunk and I will be satisfied. Get back to me if it's possible , thank you.
How do i get one of those a and c bypass harnesses..i have a 2014 impala n im having a issuse with that mic feed back. I looked on ur website and couldnt locate it
The wire comes in right below the filter so the wire will run down at a steep angle for 2 or so inches then it will pop out for you to grab. You can also run it under the cab and come up with a rain tight .
I have a 2018 Chevrolet impala premiere with the Bose system I want to add a Sub and amp, I read The Bose system is rated at 2ohms my question is would I need a sub and amp rated at 2ohms or can I run it at 4ohms also. Thanks in Advance
So I have an lc7i and 3 Amps what type of harness would I need for my 18 Malibu? I have 1 4 channel amp, a 2 channel amp and a mono amp for the sub plus I have and in the car. There’s a lot of options to choose from on the website could you help me out
i have the same car but is 2.0t LT . and i have everything ready to do it. 5 channel amp, 4-Channel Line Output Converter, and 18 awg speaker wire. i saw other video and don't say nothing about factory amp, now i saw your video and i get confuse . do i have to do the same you do or there another way ?
Hello Carlos not all of the sedans gave the factory amp . take 5 minutes to verify if you do or don't. if you do not have the amp then you connections will be done behind the glove box above the kick panel.
when I also try to have the bass higher, it like cuts off my subwoofer to when I’m driving and when I press my break it like cuts it off for a bit, why is that , I have to use it on L6 which turns my Malibu Chevy 2018 LT to automatic and shuts off the auto stop to prevent my 12” kicker from cutting off when I drive it on regular drive, cuz my car has auto stop, so even when I drive it on L6 , the auto stop is off, but when I press my brake at a stop it still cuts off only when I have a high bass.
Can I use this loop harness for a 5 channel amp from Rockford fosgate? I plan to install a Rockford Fosgate R600x5 (5 channel) amp. Can the harness work without a line output converter like the lc7i?
Hi Marru, depending on your project we have a few different set up's available for this vehicle. You can send us an email to support@lljcustoms.com, we can help you find the correct set up.
I have a 2017 Chevy impala that I want to hook up a amp and subwoofer to my factory system with out having to cut any wires. Do you guys make harnesses for my car
Were can I buy a add a amp converter box?i have a 2018 Malibu lt.i don’t want to splice any worse but I’m having a hard time finding a converter.please help lol
2016 malibu lt bose sound system need wiring harness to factory amp ples contacts me for what I get out of video the wiring harness to the amp cut off the mic phone in head liner
Hi Clayton, we offer a few options for this vehicle, we can help you find the correct set up for your project. Send us an email to support@lljcustoms.com with your vehicle and project information. We can help you find the correct harness.
@@mandoosuna9293 hello, yes the ANC stands for active noise canceling. This system plays the negative frequancy in your audio system to make the cab of the vehicle insulat from ouside noise. When the engine in high rmp the anc kicks in to try and toon out the engine. In some vehicle the anc is actually use to make your engine sound louder inside then it actually is. When this is fed into the loc or amp the sub growls
I have a 2016 Malibu with the same type of battery connections. I only have one amp connected to my battery terminal like you have, but my bass seems to cut off when I come to a stop for a period of time and release my foot off the brake. I thought this was do to the start/stop feature but I see that you have ran the power wire the same way. Can you tell me what I'm doing wrong or what could be the problem? By the way, I'm running an aftermarket android radio if that makes a difference. I have a simple installation and everything works PERFECT except for that one issue. Thanks!
Hi J Flyy.. there are 2 ways of doing this ..one is to install an independent battery for your system the other is to press the button with the A that has the half circle over it this will have to be pressed every time u use your car
@@lljcustomscaraudiofabricat7854 I am confused on what "A.." button I would need to press. Is this inside my vehicle and will I need to press it only once or every time I release the brake? More importantly, what is this button for and what function does it serve? Thanks! (No such button inside LT cabin)
@@dr.j0623 The "A" button might not exist on your car. Read this article (my.chevrolet.com/learnAbout/stop-start) and it'll explain. "Disabling Stop/Start Some vehicles have a button to turn off Stop/Start. If your vehicle is equipped with the Stop/Start deactivation switch, you can push the switch to disable Stop/Start. The switch is the button with the capital letter A within a circled arrow. If you want to disable Stop/Start, you must disable the feature each time you start the vehicle." I don't have it on my '18 Malibu
@@mhodge00 TO KILL AUTO STOP shift the gears all the way back to and change the gear shift to 6 gear it will shift like a normal car no cut off , i have the same car i know .
Is the green connector on my factory amp for my speakers? Mine is a 2018 Chevy Malibu 1LT 8" touchscreen without bose, the factory amp has two black connectors and one green connector.
This is how u take care of a customer. 🤘🏻
Do a video on how to hook up your t harness on 2017 chevy malibu non bose system .
None bose with factory amplifier will use this harness also same place. 2013-2015 none amplifier will have a green or tan connection behind the screen we have harness for that 2
@@lljcustomscaraudiofabricat7854
Will that harness in a 16’ fix roll off issues? Using a hi-lo converter bass drops off hard below 40ish hz…
Where are you guys located? I have the exact same car and wouldn’t mind the trouble of traveling for this kind of work 👌👌
Best Buy just attempted to install my new Alpine R series door speakers and amplifier. Also amplifier for my 2 JL audio subs. They had the car for 8 hours and I get it back with my front drivers speaker not working and none of the new door speakers installed. Amp and Lc7i installed but they butchered the factory harness into the amp. I'm hella mad!!!
Thinking about buying one of these for my 2016 chevy Malibu. I have been looking all over the web for something like this.
Should look into listing this video on the Chevy Malibu forms, only thing that comes up on google.
Ben looking my self got lot of feed back when I shut my doors and befor music ples
this amplifaire box suport 4 apeakers or 6 speaker ??? my car is LT come with 4 speaker in doors I want to install other speaker to back side the car ... how plz help
Ok, so i am looking at your website and I don't know what harness I need, I own a 2018 Chevy Malibu LT, needs some help with noise cancelling
New subscriber.. I love the quality of your work. I'm willing to come from Louisiana just to let you guys install my system
Hello Unspoken ! thank you for your subscription ! we would love to have you . give us a call and we can talk about your plans and project to see if we can be the best fit for you !
The purple wire on the factory harness to the stock amp is for the anc, cut that and no more anc, I might try and depin that wire from the factory plug and test chimes, Bluetooth, etc.
Excellent job😊
I got a amp and hooked up in my 2018 impala. A metal object slid onto to positive a negative hook up and I think I blowed a fuseAnd I checked all the ones I thought it could be and I haven’t found a blown fuses or somewhere else I could check
What setup should I use for door speakers and tweeters, I'm thinking of a 12" sub or 2? I got a 2018 Chevy Malibu 1LT with 8 inch touchscreen without bose.
Do you have a anc bypass harness for my 2018 Chevy Malibu 1LT with 8 inch touchscreen without bose?
Is there any "special" programming needed in replacing the OEM amp with a new OEM amp?
I hope you can help me out with my 2017 Impala I just want to add a 5 channel amp to power my interior speakers to boost the sound a little and put a set of 12 of kickers in the trunk and I will be satisfied. Get back to me if it's possible , thank you.
How do i get one of those a and c bypass harnesses..i have a 2014 impala n im having a issuse with that mic feed back. I looked on ur website and couldnt locate it
Great info on running power wire. However, how do you access the interior side of the pass-through grommet behind the cabin air filter?
The wire comes in right below the filter so the wire will run down at a steep angle for 2 or so inches then it will pop out for you to grab. You can also run it under the cab and come up with a rain tight .
I’ll check the amp fuse to go to the battery to check the fuse box underneath the steering wheel I still haven’t found it
Do I need to run multiple inline fuses for a dual amp setup or a higher amp fuse?
Did yall use 0ga power wire
where did you get the 12v from on the lc?
Looks good, nice work!
What is the black box the you should not tap into at the battery? My radio went black and now has now power.
I have a 2018 Chevy Malibu 1LT with 8 inch touchscreen without the Bose stereo. Will the Bose harness work with my car with the 8 inch non Bose?
The wire that you soldered is that for the active noise cancelling?
I have a 2018 Chevrolet impala premiere with the Bose system I want to add a Sub and amp, I read The Bose system is rated at 2ohms my question is would I need a sub and amp rated at 2ohms or can I run it at 4ohms also. Thanks in Advance
Any luck with the answer? I'm trying to find out the same thing. I have a 2018 premiere also. Any videos out there for installation?
whered you put your remote wire?
How would I wire factory radio to a bass amp that uses RCA cables?
Correct me if I am wrong but if you were using a audio control amp such as the LC 4.800 you would not need the LC7i right?
Can I use a acm 1.300 and acm 4.300 with this harness, or do I need to get an additional t-harness with the loop harness?
Do you have one for a 2018 Chevy Cruze 6 speaker sound non Bose I have a Audiocontrol LC1.800
We can verify if we have the connector available. Send us an email to support@lljcustoms.com we can help you out.
So I have an lc7i and 3 Amps what type of harness would I need for my 18 Malibu? I have 1 4 channel amp, a 2 channel amp and a mono amp for the sub plus I have and in the car. There’s a lot of options to choose from on the website could you help me out
i have the same car but is 2.0t LT . and i have everything ready to do it. 5 channel amp, 4-Channel Line Output Converter, and 18 awg speaker wire. i saw other video and don't say nothing about factory amp, now i saw your video and i get confuse . do i have to do the same you do or there another way ?
Hello Carlos not all of the sedans gave the factory amp . take 5 minutes to verify if you do or don't. if you do not have the amp then you connections will be done behind the glove box above the kick panel.
@@lljcustomscaraudiofabricat7854 ok thanks I let you know when is done
when I also try to have the bass higher, it like cuts off my subwoofer to when I’m driving and when I press my break it like cuts it off for a bit, why is that , I have to use it on L6 which turns my Malibu Chevy 2018 LT to automatic and shuts off the auto stop to prevent my 12” kicker from cutting off when I drive it on regular drive, cuz my car has auto stop, so even when I drive it on L6 , the auto stop is off, but when I press my brake at a stop it still cuts off only when I have a high bass.
Can I use this loop harness for a 5 channel amp from Rockford fosgate? I plan to install a Rockford Fosgate R600x5 (5 channel) amp. Can the harness work without a line output converter like the lc7i?
How much for the wires for my chevy impala 2017 I need help please
Hi Marru, depending on your project we have a few different set up's available for this vehicle. You can send us an email to support@lljcustoms.com, we can help you find the correct set up.
I have a 2017 Chevy impala that I want to hook up a amp and subwoofer to my factory system with out having to cut any wires. Do you guys make harnesses for my car
Hello, yes we do. Here is the link. lljcustoms.com/store?olsPage=products%2F2017-2019-gmchevy-malibu-impala-oem-amp-harness
Can I keep my anc if I use an amp without a sub?
Did the car come with rear 6x9 speakers?
Were can I buy a add a amp converter box?i have a 2018 Malibu lt.i don’t want to splice any worse but I’m having a hard time finding a converter.please help lol
Hello, here is the harness for your vehicle.
lljcustoms.com/store?olsPage=products%2F2017-2019-gmchevy-malibu-impala-oem-amp-harness
2016 malibu lt bose sound system need wiring harness to factory amp ples contacts me for what I get out of video the wiring harness to the amp cut off the mic phone in head liner
Hi Clayton, we offer a few options for this vehicle, we can help you find the correct set up for your project. Send us an email to support@lljcustoms.com with your vehicle and project information. We can help you find the correct harness.
Do you guys have a link for the amp rack.?
Can I use a loop harness for a 5 channel amp and lc7i?
I have the same car installed the system and when I accelerate i Hear the bass loud would you know why??
Hello, that would be the ANC . You need to bypass it
LLJ Customs Car Audio Fabrication L.L.C can you explain more on what that is
@@mandoosuna9293 hello, yes the ANC stands for active noise canceling. This system plays the negative frequancy in your audio system to make the cab of the vehicle insulat from ouside noise.
When the engine in high rmp the anc kicks in to try and toon out the engine.
In some vehicle the anc is actually use to make your engine sound louder inside then it actually is. When this is fed into the loc or amp the sub growls
Can you sell the amp mounts for the Malibu?
Can I leave the top plug unplugged from the factory amp to shut off the ANC?
Hello, no that plug also has the data transfer wires it must stay pluged in
@@lljcustomscaraudiofabricat7854 What does that do?
@@seangowan7441 in some models it control's the screen wake up in some it does the vedio for the backup camera and some safety check software
@@lljcustomscaraudiofabricat7854 if I cut the purple wire it will disable the ANC completely.
I have a 2016 Malibu with the same type of battery connections. I only have one amp connected to my battery terminal like you have, but my bass seems to cut off when I come to a stop for a period of time and release my foot off the brake. I thought this was do to the start/stop feature but I see that you have ran the power wire the same way. Can you tell me what I'm doing wrong or what could be the problem? By the way, I'm running an aftermarket android radio if that makes a difference. I have a simple installation and everything works PERFECT except for that one issue.
Thanks!
Hi J Flyy.. there are 2 ways of doing this ..one is to install an independent battery for your system the other is to press the button with the A that has the half circle over it this will have to be pressed every time u use your car
@@lljcustomscaraudiofabricat7854 I am confused on what "A.." button I would need to press. Is this inside my vehicle and will I need to press it only once or every time I release the brake? More importantly, what is this button for and what function does it serve? Thanks! (No such button inside LT cabin)
@@dr.j0623 The "A" button might not exist on your car. Read this article (my.chevrolet.com/learnAbout/stop-start) and it'll explain.
"Disabling Stop/Start
Some vehicles have a button to turn off Stop/Start. If your vehicle is equipped with the Stop/Start deactivation switch, you can push the switch to disable Stop/Start. The switch is the button with the capital letter A within a circled arrow. If you want to disable Stop/Start, you must disable the feature each time you start the vehicle."
I don't have it on my '18 Malibu
LLJ Customs Car Audio Fabrication L.L.C Where are you guys located?
@@mhodge00 TO KILL AUTO STOP shift the gears all the way back to and change the gear shift to 6 gear it will shift like a normal car no cut off , i have the same car i know .
Anybody know the model the t harness he used
Where you located?
And I checked all the fuses on the app
1719MIAH . Is this the part number for this harness on your website?
I should of read comments first ha!
Where did you run the ground wire?
Johnny Hampton I ran my shit to the bolt on the back left side
How can I buy harness
Website...
Now i see why they gave me a estimate of 550.00 JUST to install an amp n woofer 😒
Is the green connector on my factory amp for my speakers? Mine is a 2018 Chevy Malibu 1LT 8" touchscreen without bose, the factory amp has two black connectors and one green connector.