We had a wonderful time, spending time with Clay (family) all the tool trucks and the great personalities of guys that runs them. The you tubers present was very nice to be around and listening to all stories and meeting great people to make new friends with. Can’t wait till next year.
We had a small yard. 1st base was the tree. 2nd was a bush right behind the pitchers mound and 3rd was the air conditioner on the house. A home run was maybe 100 feet
We talked about the 3 in 1 rbrt set Sae and metric hex and torx but what I didn’t mention was torx in 1/4 through t-30 then torx in 3/8 starting back with t-25 ,t-27, t-30 and up from there through at least t-55 or t-60 in 3/8... if you went 1/2 overlap t-50 t-55 t-60
I love my awesome tool haul. It was great meeting all of you. Michael, Wookie loves his new MAC 4x4 vehicle. It is remote control, who knew, that was a fun win. Okay I'm in love with all your tools. Glad we got a bunch of ratchets and pry bars. Glad we got a bunch of RBRT's. I enjoyed talking to DAN. Just saw that RBRT torx master set. Will txt you, gotta get that master set. I know you have the RBRT socket sets coming, we would like a full set of it all. Glenn (orange shirt man), Wookie and I had a blast. Clay thanks so much putting together a fun event and having all the dealers there. Shilo rolled out the red carpet for everyone. Hope you see yall again sooner than next year. MAC tools truck was loaded with tools and it was fun buying all that stuff.
Thank you guys for coming and it was so cool to meet you guys and bringing Wookie with you. That’s the coolest dog I have ever seen! I look forward to seeing you again! For sure next year you all will have to be there!
You would be amazed at some of the vehicles that comes to my buddies collision repair shop that he owns and operates... It's unreal how he can rebuild the stuff, that you can't even tell what brand and model the vehicle is by just looking at it but it is some of the best money a person will make in the automotive industry...
Thanks for the filet knife info from last week. I called my dealer about them and he asked "how did you find out about them?" 😉😁🤣🤣 I ended up getting both sizes.
He done needs a shot or two of jack daniels. That would really get the RUclips comments and likes going up! Love the content. Keep it going. No one else is like you. You have a great future
That's funny you mentioned remote control car with the cord attached.... you just let it go to the cord stretches tight that's an easy way to get your RC car to do a burnout
Then you get some that don't make sure bit socket is not seated in all the way also not checking for dirt,crud and garbage in the torx or hex fastner.It doesn't take long to take a pick or small screwdriver to clean the dirt,crud and garbage out finally blowing them out with a spray nozzle before inserting the hex or torx bit socket
I think it would be interesting to find out in more detail how all the tool trucks did Saturday. Did many tool boxes sell, did anybody run out of something, maybe u could ask Jovan and Michael to give us a little more detail on how the Snapon and Matco sales were. If they say they were good say no no we need details. Really enjoyed the live stream Saturday. Great job!
I wish mac would have made the cases different to where the foam tray would have been square and not have the bump out where the handle is. I think that would look better in your toolbox drawer.
I sure was happy to shop Mac Daddy Michael’s truck at the meet up! I bought the 122pc bit and ratcheting screwdriver set and a extra long locking AXIS 3/8 ratchet. Also, that hand cleaner “Dab-A-Do”, is really good! Also, I’ll be looking for that two piece oiler kit I bought fro MDM.
@@KoonTrucking overall we had a good time. All of the tool truck guys were very friendly. Mrs. Koon was very friendly and hospitable. We met a very nice couple from central KY and another from nearby AL. The lunch you provided was nice. We left shortly after the band left. They were awesome, BTW. They played songs that we really liked. My only disappointment was that I was there for just shy of 12 hours and I got to ask you two questions. I am a really big fan of you, and I still am. However, it felt like your YT friends were snobby and crowded you all day long. That made it feel as if we were “outsiders”. I appreciate what you provided us that day for free. I appreciate what you do for us on YT. I ordered two DM tee shirts early in the morning by your shirt provider and they promised they would be done and delivered later in the day. They did not come through for us. Later, they said we could “pick them up on Sunday, we were leaving Sunday early and did not get them, bummer. It was nice to meet Cooter, whom I frequently race to comment on your vids, lol. If I could’ve chatted with you for say, 10-15 mins I would’ve been satisfied (I had a lot of questions). Again, you felt unapproachable, due to fellow YT’ers always following you around. I will remain a faithful friend to you and your channel, but we will most likely not attend next year. I did buy something from all tool trucks and those guys and their wives were “second to none”! Thank you for asking of we had a good time. You are a classy guy!
@@TWR358 I tried to make myself available all day long, I even missed lunch due to showing people around and talking with them. I apologize that you felt I was unapproachable, because I tried to speak with everyone there and spend time with them. Even when the band was playing I tried to go around so everyone could have a chance to chat and visit.
good video on the mac truck. Waiting for jersey Nick to come out with a version of the rbrt. Maybe next I can attend the meet up. Keep the videos coming.
It seemed like I caught more fish as kid and I only had hook sinker and bobber even had to dig my own worms. No seems like need hat shirt shorts and thousands of $ worth of lures
I really want to buy that new dewalt impact but you cant find those damn oil resistant batteries anywhere, nevermind the kit, wish we had more trucks at work, all we have is a snap on guy, granted he is a really cool dude, rather have 1 really awesome tool dealer than 2 or 3 bad ones or even decent ones
I wasn’t taking the time away from people that came there to do videos. People drove a long way even some from Maryland to come. I felt like I did the best I could by providing the entertainment and popping in when I could. But it wasn’t right for me to not socialize with the people that came. Everyone was invited to come.
I am not familiar with RBRT. I try to stick with USA tools, but the bluepoint set has been great for me. What is the deal with RBRT? Thanks for the great videos. I have only ever been on a Snap On truck and it is neat to see what other dealers have to offer.
@@marcusloftis2779 Better check that Blue Point set, if you are after USA made tools..... just saying. The RBRT line is far superior than any other design of hex or torx on the market the way they grip the fastener and they doesn't rely on the tips to engage with the fastener. Blue Point is made in Taiwan same as the RBRT sets but RBRT is owned by an American company so the money still stays in the US (and no it is not Stanley Black and Decker who owns Mac Tools, they just sell them for the owners of RBRT)
@@marcusloftis2779 if you will look at the card on the end of the video you will see the RBRT demo and it explains how they work to push outwards on the inside of the fastener to prevent rounding of good fasteners and also to get out fasteners that have been rounded out. They simply work better than any other brand on Earth.
I tell ya what, trying to look up stuff on macs website sucks ass. Guess I won’t be buying anything if you can’t even find what your looking for on there.... PATHETIC
I agree with Michael. A RBRT hex & torx set would be awesome.
I wish mac would start making more tools in USA
Would love to see Michael and MAC truck back Clay !
Loved my visit on the Mac truck Saturday. That was my first time on one. He’s a cool dude.
We had a wonderful time, spending time with Clay (family) all the tool trucks and the great personalities of guys that runs them. The you tubers present was very nice to be around and listening to all stories and meeting great people to make new friends with. Can’t wait till next year.
It was a blast! I can’t wait to hang out with you Bama boys again! Y’all are alright in my book!
We had a small yard. 1st base was the tree. 2nd was a bush right behind the pitchers mound and 3rd was the air conditioner on the house. A home run was maybe 100 feet
We talked about the 3 in 1 rbrt set
Sae and metric hex and torx
but what I didn’t mention
was torx in 1/4 through t-30 then
torx in 3/8 starting back with
t-25 ,t-27, t-30 and up from there through
at least t-55 or t-60 in 3/8...
if you went 1/2 overlap t-50 t-55 t-60
I love my awesome tool haul. It was great meeting all of you. Michael, Wookie loves his new MAC 4x4 vehicle. It is remote control, who knew, that was a fun win. Okay I'm in love with all your tools. Glad we got a bunch of ratchets and pry bars. Glad we got a bunch of RBRT's. I enjoyed talking to DAN. Just saw that RBRT torx master set. Will txt you, gotta get that master set. I know you have the RBRT socket sets coming, we would like a full set of it all. Glenn (orange shirt man), Wookie and I had a blast. Clay thanks so much putting together a fun event and having all the dealers there. Shilo rolled out the red carpet for everyone. Hope you see yall again sooner than next year. MAC tools truck was loaded with tools and it was fun buying all that stuff.
Thank you guys for coming and it was so cool to meet you guys and bringing Wookie with you. That’s the coolest dog I have ever seen! I look forward to seeing you again! For sure next year you all will have to be there!
You would be amazed at some of the vehicles that comes to my buddies collision repair shop that he owns and operates... It's unreal how he can rebuild the stuff, that you can't even tell what brand and model the vehicle is by just looking at it but it is some of the best money a person will make in the automotive industry...
I know it blows my mind. Those guys have amazing amounts of talent
Great video y'all have a great one and stay safe 👍
Thanks for the filet knife info from last week. I called my dealer about them and he asked "how did you find out about them?" 😉😁🤣🤣 I ended up getting both sizes.
Mac daddy needs an espresso or an energy drink.
He's like Jack Johnson, Laid back!
He done needs a shot or two of jack daniels. That would really get the RUclips comments and likes going up! Love the content. Keep it going. No one else is like you. You have a great future
That's funny you mentioned remote control car with the cord attached.... you just let it go to the cord stretches tight that's an easy way to get your RC car to do a burnout
Then you get some that don't make sure bit socket is not seated in all the way also not checking for dirt,crud and garbage in the torx or hex fastner.It doesn't take long to take a pick or small screwdriver to clean the dirt,crud and garbage out finally blowing them out with a spray nozzle before inserting the hex or torx bit socket
I think it would be interesting to find out in more detail how all the tool trucks did Saturday. Did many tool boxes sell, did anybody run out of something, maybe u could ask Jovan and Michael to give us a little more detail on how the Snapon and Matco sales were. If they say they were good say no no we need details. Really enjoyed the live stream Saturday. Great job!
I ended up with quite a bit of stuff off of each truck, and a new slingshot powerwheels for the grandkid.
I wish mac would have made the cases different to where the foam tray would have been square and not have the bump out where the handle is. I think that would look better in your toolbox drawer.
The Atari 2600 was for when you couldn't go outside not to replace outside. I was like 6yo when we got it.
I sure was happy to shop Mac Daddy Michael’s truck at the meet up! I bought the 122pc bit and ratcheting screwdriver set and a extra long locking AXIS 3/8 ratchet. Also, that hand cleaner “Dab-A-Do”, is really good! Also, I’ll be looking for that two piece oiler kit I bought fro MDM.
My only questions are.... "Did you have a good time?" and "Was it worth coming too and will we see you next year?"
@@KoonTrucking overall we had a good time. All of the tool truck guys were very friendly. Mrs. Koon was very friendly and hospitable. We met a very nice couple from central KY and another from nearby AL. The lunch you provided was nice. We left shortly after the band left. They were awesome, BTW. They played songs that we really liked. My only disappointment was that I was there for just shy of 12 hours and I got to ask you two questions. I am a really big fan of you, and I still am. However, it felt like your YT friends were snobby and crowded you all day long. That made it feel as if we were “outsiders”. I appreciate what you provided us that day for free. I appreciate what you do for us on YT. I ordered two DM tee shirts early in the morning by your shirt provider and they promised they would be done and delivered later in the day. They did not come through for us. Later, they said we could “pick them up on Sunday, we were leaving Sunday early and did not get them, bummer. It was nice to meet Cooter, whom I frequently race to comment on your vids, lol. If I could’ve chatted with you for say, 10-15 mins I would’ve been satisfied (I had a lot of questions). Again, you felt unapproachable, due to fellow YT’ers always following you around. I will remain a faithful friend to you and your channel, but we will most likely not attend next year. I did buy something from all tool trucks and those guys and their wives were “second to none”! Thank you for asking of we had a good time. You are a classy guy!
@@TWR358 I tried to make myself available all day long, I even missed lunch due to showing people around and talking with them. I apologize that you felt I was unapproachable, because I tried to speak with everyone there and spend time with them. Even when the band was playing I tried to go around so everyone could have a chance to chat and visit.
Mat and matco are pretty cool
Yeah, Hercules and the Sandlot Kids one of the gratest Kid's Films.
Master kit are like greatest hits album of your favorite band.
good video on the mac truck. Waiting for jersey Nick to come out with a version of the rbrt. Maybe next I can attend the meet up. Keep the videos coming.
Come on it’s a blast!
@@KoonTrucking if I get back to work next year. Want to meet cooter and your son could have a small air force reunion.
Rbrt is amazing but so damn expensive
Yes it’s high
Why isn't Michael at Tool Fair with the rest of the Mac family?
no clue, I guess when Mac doesn't act right with them, they do their own thing?
Mac daddy!!
I got both master rbrt set could go a day with out them
Reallly hope you guys do it next year or whenever possible I wanna meet all you guys!! Sorry I couldn’t make it
It’s happening. I already booked the band !
It seemed like I caught more fish as kid and I only had hook sinker and bobber even had to dig my own worms. No seems like need hat shirt shorts and thousands of $ worth of lures
Watching from New Zealand, I could be wrong but it seems like we're seeing less actual snap on tools .
someday I will make the party !
I really want to buy that new dewalt impact but you cant find those damn oil resistant batteries anywhere, nevermind the kit, wish we had more trucks at work, all we have is a snap on guy, granted he is a really cool dude, rather have 1 really awesome tool dealer than 2 or 3 bad ones or even decent ones
How much do the MAster rbrt kits cost ?
What was the part number on the 2 piece set that flexed and had the bit driver and socket tip?
I will check next week
You can get it from Mayhew.
Do you know if the tool trucks honor the student discounts or is it just online?
Think it’s through the student program only
I wish I had a Mac guy we only have one and he doesn't stop at our shop
And will not take cash sales
How about some blue Mac Ratchets and other tools. Maybe Mac can do what Matco doesn't want to do.
Go to Cornwell 😂
I got a bloody nose after that camera smack. I'm suing!
All you would get will be tool bills …… just tell me which one you want and I will send it. That will save a little time and trouble
Hey Clay, can you find out the price on the 1/4” extension set shown in this vid. Thanks
Text Michael 662-871-0088
👍🏻
Yer killing me Smalls..
Would you happen to have a part number on that torx set?
Does Mac daddy micheal ship anywhere 👀 don’t have a Mac truck here
Is the January Wrench set up for grabs still?
No clue you would have to text Michael 662-871-0088
I’ll text him in the morning. Thank you sir
Long gone are the days of public park “atomic bomb” teeter-totters and spinning merry go rounds until you and your friends fly off for fun.
Damn how much was the die grinder combo? Guess it was in last months flyer
It was in the flyer several months back. I don’t remember off hand. Text Michael 662-871-0088
Hellaofa party 🎉
What is the part number of those master sets?
What’s the part number on those rbrt master sets
We showed them in the next Mac tools video and covered each part number
@@KoonTrucking thank you
The live stream would of been better if the camera was walked around and on tool trucks, talk to people and of course the music a little.
I wasn’t taking the time away from people that came there to do videos. People drove a long way even some from Maryland to come. I felt like I did the best I could by providing the entertainment and popping in when I could. But it wasn’t right for me to not socialize with the people that came. Everyone was invited to come.
"...$15-$20 a week will add up over a year..." Damn skippy!
Blue point has a master set with torx and Allen
Not RBRT though and there’s a huge difference
I am not familiar with RBRT. I try to stick with USA tools, but the bluepoint set has been great for me. What is the deal with RBRT? Thanks for the great videos. I have only ever been on a Snap On truck and it is neat to see what other dealers have to offer.
@@marcusloftis2779 Better check that Blue Point set, if you are after USA made tools..... just saying. The RBRT line is far superior than any other design of hex or torx on the market the way they grip the fastener and they doesn't rely on the tips to engage with the fastener. Blue Point is made in Taiwan same as the RBRT sets but RBRT is owned by an American company so the money still stays in the US (and no it is not Stanley Black and Decker who owns Mac Tools, they just sell them for the owners of RBRT)
@@marcusloftis2779 if you will look at the card on the end of the video you will see the RBRT demo and it explains how they work to push outwards on the inside of the fastener to prevent rounding of good fasteners and also to get out fasteners that have been rounded out. They simply work better than any other brand on Earth.
Why would I buy Mac Tools over Cornwell?? Reasons??
Cornwell doesn’t have RBRT (that’s one reason)
Grab the right tool the first time
All these newer mac tools are made in China, I would much rather buy tools of equal or superior quality for 1/4 of the price without the mac logo
Garth brooks will be too busy singing fur joe Biden inauguration
I tell ya what, trying to look up stuff on macs website sucks ass. Guess I won’t be buying anything if you can’t even find what your looking for on there.... PATHETIC
Their website sucks. You can’t find anything on there easily
@@KoonTrucking that’s for sure